WARNING “To reduce the risk af ir or strict shock, do not expose this apples to rain or moisture. CAUTION “This device complies With part 15 of the FCC Rules.
How io Operate .Smm TRS Indicator Light MIC Input MIC: Power USB Por ‘Transmitter ~=Push and hold the power button for 2.5 seconds to tum ON the TX and RX. Before it gets paired automatically, you can see TX's battery status; if the LED indicator: #Blinks GREEN — Well Charged (100%: GREEN >75%) brinks YELLOW —Medium Battery (75%: YELLOW =50%) Blinks RED — Lower Batista (50%> RED 225%) Hashing RED for 10 Hines — Low Battery tum off automatically to protract battery life.
How to Operate After 2 seconds, it will be paired automatically, and the TX's LED status will blink GREEN. {B-10 Biog will detect the best channel in the 2.4GHz frequency band, if the transmitter and receiver get paired, TX's LED will show GREEN. If the RX doesn't receive a signal, the RX's display will flash t=) Since the RX receive the signal, the display will show (c2) to present the current receiving signal strength. How io Operate Clip the TX as lavaliere microphone to mic your voice.
How to Operate Since the TX is muted on. Short press TX's power button to switch MUTE(LED shows FORMALDEHYDE show GREEN) status. Since the RX is muted on, short press the power button to adjust OUTPUT LEVEL: 0dB / +6dB / +12dB / -12dB / B4B sequentially. The default OUTPUT LEVEL is 0dB. Please tum OFF both wireless units {the TX and the RX), and charge the wireless units directly by using the USB-C Y-cable (included). Once the unit Is Tull charged, the charging function will be shut down automatically.
Function Introduction Specifications Mute function ® Operating Frequency Band: 2.4 Gz @Battery Running Time: 4 hours While B-10 Works, pres tie TX's power Bun once, | will enter to MUTE status, then the TC LED will show RED, and » Operation Length: < 100 feet (30m) ® Microphone on TX: Unidirectional Electric. Condenser the RX's display will show: ® Sampling Rate: BLT/ 44.