SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. Most electrical accidents are caused by carelessness. Review these basic electrical guidelines before you begin this installation. « Use tools with insulated handles and ladders made of wood or fiberglass. «+ Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop. Never disable grounding devices.
PREPARATION READ ALL INSTRUCTIONS BEFORE INSTALLATION. KEEP FOR FUTURE REFERENCE. PER-INSTALLATION « Fixture must be installed, checked and repaired by an authorized electrician. « This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. « For proper operation, make sure to connect the fixture to the proper voltage and install it according to these instructions.
FIXTURE INSTALLATION STEP 1 Identify the wires: Turn OFF the main power at the circuit breaker before installing the fixture. Identify the wiring: BLACK:Line Voltage White Neutral Green Ground STEP 2 Attaching the mounting plate: Attach the mounting plate (A) to the junction box using the two screws (D) provided. Align the mounting plate in the direction you want the fixture to be aligned. Once the toggle bolts are installed, you cannot change the orientation. STEP 1 STEP 2 °|Ol White © \Black na = Green Wh
FIXTURE INSTALLATION STEPS Re-attaching the mounting plate: Feed the junction box wires through the center of the mounting plate (A) hole. Re-attach the mounting plate (A) by inserting the four adjustable wing nuts (B) into the drilled holes. Once the wings (B) are through and expanded, pull the screw (B) downward to engage and tighten. STEP 6 Connecting the panel light: Hook the support wire from the fixture on the mounting bracket panel.