User Manual

ManualsBrandsNuvoo ManualsAir treatment & Climate controlStand fan - Diameter 40cm - Oscillation function - 3 positions - Silent fan - Energy-saving timer function (up to 8 hours) - Remote control - Black

16” (40cm) Stand Fan

Instruction Manual

NVO-SF40BK

WARNING To reduce the risk for fire, electric shock or personal injury

•

Do not use this fan with any solid-state speed control device.

•

Unplug the fan before cleaning or servicing.

•

If you disassemble your fan, completely re-assemble before plugging into outlet.

•

To reduce the risk of electric shock and injury to persons, do not use in window.

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS

This fan is for residential use only. It is not intended for use in commercial or industrial

settings.

Summary of content (4 pages)

PAGE 1
6” (40cm) Stand Fan Instruction Manual NVO-SF40BK WARNING To reduce the risk for fire, electric shock or personal injury • • • • Do not use this fan with any solid-state speed control device. Unplug the fan before cleaning or servicing. If you disassemble your fan, completely re-assemble before plugging into outlet. To reduce the risk of electric shock and injury to persons, do not use in window. PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS This fan is for residential use only.
PAGE 2
Important instructions Read and save these important safety instructions before using this fan, when using electrical appliances, basic safety precautions should always be followed including the following: WARNING - To reduce the risk of fire or electrical shock, do not use this product with any solid state speed control device. To reduce the risk of fire or electric shock and injury to persons, do not use in a window. - Use this fan only as described in this manual.
PAGE 3
and secure by turning the assembly knob clockwise. 4. Remove the rear grill mounting nut by turning it counter-clockwise. 5. Place the rear grill onto the motor housing aligning the 3 raised knobs on the top of the motor housing with the 3 holes on the grill. 6. Place the rear grill mounting nut and tighten turning clockwise. 7. Align the blade onto the shaft and secure it by tightening the blade knob counter-clockwise. 8.
PAGE 4
Description of parts 1. Front grill 2. Grill protective ring 3. Fasten clip 4. Blade knob 5. Blade 6. Rear grill mounting nut 7. Rear grill 8. Shaft 9. Handle 10. Oscillating pin 11. Motor assembly 12. Neck 13. Control panel 14. Assembly knob 15. Pole 16. Height adjuster 17. Base 18. Locking mechanism 19.