The Intelligent Surveillance Solution NuFace User Manual Ver. 1.0.0.151015.
Table of Content 1. 2. 3. 4. 5. Introduction: .................................................................................................. 3 1-1 Function ............................................................................................. 3 Requirement: ................................................................................................. 3 2-1 Minimum Hardware Requirement ........................................................... 3 2-2 Tested Capture Device: ..................
1. Introduction: NuFace is a windows-based application aiming to provide advance face recognition analysis service to users with simplicity configuration and accurate result. This application should be compatible with NUUO all product line with TCP/IP metadata connection: NUUO Mainconsole v6.1 and above NUUO Crystal v3.1 and above 1-1 Function Nuface is a portable application which shall provide below functions: - Get video streaming from WebCam or IPcam.
2-2 Tested Capture Device: Web Cam Model Logitech HD Webcam C910 and C920, Logitech Quickcam Pro 9000, Microsoft LifeCam Series Environment Distance of Face Indoor with bright light 7 meters in 640x480 resolution IP Cam Brand Environment Distance of Face Axis, Vivotech, D-link, Basler Indoor with bright light 7 meters in 800x600 resolution 2-3 OS Requirement: Windows 7: Microsoft.NET Framework 4.0 or above Microsoft Visual C++ 2010 (x86) Windows XP: Microsoft.NET Framework 3.5 and 4.
2-4 Application Spec Features Face recognition Black list Distance detection Gender detection Age detection Face Scramble Specification Supported Video Source Web Cam/USB Cam IP CAM (via CGI or RTSP) Recommended Codec for analysis MJPEG over HTTP MJPEG over RTSP Max.
3. Interface and Operation: 3-1 Application UI Feature Definition Face detection and counting Uses pattern detection to log and analyze the demographics of the people who see the visual messaging. Age estimation Counts and reports the age and age ranges of detected persons. Gender estimation Counts and reports the gender of detected persons. Attention time Detects how long each detected viewer looks at a message.
3-2 License Activation NuFace is portable application. How to activate license: a. Open License.ini b. Type in license serial number (42 digits) in License.ini c. Close license.ini d. Open NuFace.exe e. File Tab – Click Activate License 3-2-1 Notes of License activation - First time Activate license or Change license requires WAN environment for license server. - Only one license number is accepted in license.
If IP CAM is selected, the setting window will pop-up.
3-4 Registering Faces -Adding face profile – Regist
1. Click ”Regist” on the menu bar -> The Regist Box pops up 2. Enter “Name” for the ID -> Click “Add” 3. ID should be added to the Album List There are two ways to add album files 3-1 Register From Capture – directly capture face image from video device. 3-2 Register From File – add face image from existing picture. 4. Adding faces with different angles for better performance 5. Click “close” when you finish the registration process -Add group as Black and White list 1.
2. You can press the Album and assign the person to the group of black or white list .
3.
3-5 Advance Setting 3-5-1 Mimimum Application Click “Start Minimum” in the list of “Option” functions, NuFace will be minimized to the toolbar when running. 3-5-2 Feature Enable/Disable Click “Active” on the function list and enable/disable the feature.
Feature Start Capture Face Detect Estimate Output log Output Face Image Face Filter Action Starts the camera capture Detects faces shown on the screen Estimate age and gender Export log file Export face image Mosaic the faces shown on the screen Default setting: “Start Capture”, “Face Detect”, “Estimate”, “Output Log” are enabled. 3-5-3 Face Filter Click “Active” on the function list and enable “Face Filter”, the face will be scrambled.
3-5-4 Detection Setting Click “Option” on the function list and select “Detect Option” The parameter setting will be shown as below:
Parameter Face Size Definition and Description The minimum face resolution to be detected. Face Interval The allowed tolerance of distance between viewers. The smaller the value, the closer the distance between two faces that can be detected and vice versa. Frame Detect The parameter is to set the Interval number of frames between each identification. The default setting of “5” means 5 frames between each identification. The larger the value, the lower the loading time, but with a slower refresh on screen.
1 OTS stands for opportunity-to-see. OTS is used for defining the audience that has been detected with/without age/gender estimation. 2 Viewer is used for defining the audience whose age/gender has been estimated and viewing time is sufficient. 3-5-5 Age Range Setting Click “Option” on the function list and select “Log Option” to set the range of age. Click Default to restore te default system settings.
31-59 60-100 Parameter Parameter Middle Range Adult Senior Definition and Description Neutral gender range: the higher the scale, the greater the range for neutral gender allowance.
4. Metadata connection guide (Mainconsole) 1. Open NUUO Main Console, go to General Setting> Metadata Application 2. Click on “Insert” to add new source; the Metadata type is Nu-connection, the source type should be Nuface, the port for NuFace is “4097”.
3. Test connection 4.
5. Back to Main page,Go to General Setting > Setting > System Setting 6.
7. Enter IP Cam’s IP address、port、user account、password,customize name, please also select the IP CAM’s manufacturer and model name . 8. Go back to Metadata application page,select the IP camera you just added and choose the Nuface Filter accordingly .
9. Enter a customize name for Nuface,press “ OK” and choose the new build data filter in the metadata filter list . 10. Go back to Main Page, the Nuface Metadata will show up in the screen if the link is successful.
5. Metadata Connecting Guide (Crystal ) 1. Download “NUUO_Nuface_Plugin.zip” from NUUO Website. 2. Upload “NUUO_Nuface_Plugin.zip” to Metadata Server. 3. Click on “Add NuFace” to add new source 4. Go to metadata source > Properties, enter Server IP ( Nuface software’s IP address ) , the port for NuFace is “4097”, then press “Connection test” to make sure the connection is alive.
5. Add metadata channel, go to properties and enter Channel ID accordingly. (Ex : First will be 0 , second will be 1, etc … ) 6.
password,customize name, please also select the IP CAM’s manufacturer and model name . 7. Go back to Metadata application page > Metadata Display,select the IP camera you just added related to the metadata . 8.
build data filter in the metadata filter list . 9. Go back to Main Page, the Nuface Metadata will show up in the screen if the link is successful.