Spec Sheet

ManualsBrandsNuTone ManualsCooling & Air QualityOne-bulb Heater/Ventilation Fan, 4.0 Sones

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

Broan-NuTone Canada ULC Mississauga, Ontario Canada www.nutone.ca 1-888-882-7626

HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home

Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated

at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of

humanly-perceived loudness, based on laboratory measurements.

SPECIFICATIONS

*Total connected load

**BR40-size infrared bulbs.

Use house wiring rated 60°C min.

NOTE: Dimensions shown are in inches.

SPECIFICATION SHEET

PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 9417DNMd161128

MODEL 9417DNM

INFRARED BULB HEATER

Silent warmth and the choice of added ventilation in a

compact design.

FEATURES

• White polymeric grille

• Sturdy steel housing

• Adjustable mounting brackets that span up to 24”

• Housing can be adjusted vertically after ceiling is finished

• Uses 250 W BR40-size infrared bulb (not included)

• Plug-in, permanently lubricated motor

• Quiet polymeric blower wheel

• Polymeric damper/duct connector with 1-5/8” long tapered sleeve

and no metallic clatter

• Heat and Vent functions may be controlled separately or in

combination

• Suitable for use in insulated ceiling (Type I.C.)

TYPICAL SPECIFICATION

Bulb heater shall be NuTone model 9417DNM.

Heater shall have corrosion resistant steel housing and adjustable

mounting brackets.

Unit must use a 250 W BR40-size infrared bulb. Bulb heater to be

CSA certified.

Motor assembly to be removable and permanently lubricated.

Non-metallic damper/duct connector to be included.

Heater and ventilator to operate separately (or in combination).

Air delivery shall be no less than 70 CFM and sound level no greater

than 4.0 sones. All air and sound ratings shall be certified by HVI.

Suitable for use in insulated ceilings (Type I.C).

VOLTS AMPS WATTS* SONES CFM

ROUND

DUCT

120 2.5 300** 4.0 70 4”

0.45

0.40

0.00

0.05

0.30

0.25

0.20

0.15

0.10

0.35

3020100908070605040

Air Flow Rate (cfm)

Static Pressure (in. w.g.)