nuraloop — User Manual nura model: E00B Power: 5V, 0.2A Wireless frequency band: 2400-2483.5 MHz nuraloop Manual Copyright © 2019 nura® Pty. Ltd.
Contents nura Getting started 3 Your NuraLoop 7 Fitting your NuraLoop Turning your NuraLoop on/off Downloading the Nura app Swapping between Bluetooth® devices Personalising your NuraLoop Updating your NuraLoop 4 4 4 5 5 6 Charging your NuraLoop Checking your NuraLoop’s battery Using your NuraLoop’s TouchDials Making and receiving voice calls with your NuraLoop Connecting cables to your NuraLoop Connecting your NuraLoop to other products Computers TVs Aeroplane adaptors Changing your N
NuraLoop safety information nura Read this manual before using the NuraLoop for the first time. Keep this manual handy for future reference. The NuraLoop has been designed and tested for safety and comfort, but please note: exposure to any noise of 85 Decibels (dB) or above (approximately the same volume as a food blender) can cause gradual hearing loss. Due to the clarity and noise canceling of the NuraLoop, you won’t need to listen to your music as loudly as with many conventional headphones.
nura Getting started Following these steps to set up your NuraLoop the first time you use it — 2 1 3 1 TouchDials 2 Voice call microphone 3 PlayClip magnetic connector nuraloop Manual Copyright © 2019 nura® Pty. Ltd.
nura Fitting your NuraLoop 1 1. a. b. c. 2 Put your NuraLoop’s cable behind your head. Place the hook over your ear. Insert the ear tip into your ear. 2. Rotate the ear tip back and forth. Your NuraLoop should feel secure and comfortable. If the ear tips are uncomfortable or don’t sit securely in your ears, then try changing to different sized ear tips. Turning your NuraLoop on/off Your NuraLoop turns on and off automatically when you put it in your ears.
nura Connecting your NuraLoop with Bluetooth® To set up your NuraLoop, you’ll need to connect with Bluetooth. To connect your NuraLoop with Bluetooth: 1. Put on your NuraLoop. When you put on your NuraLoop, it turns on and enters discoverable mode. 2. Open your mobile device’s Settings > Bluetooth. 3. Select NuraLoop XXX. Don’t connect to NuraLoop XXX [LE]. This is your NuraLoop’s low-energy mode, which automatically connects after you’ve connected to NuraLoop XXX.
nura Personalising your NuraLoop: 1. In the Nura app, tap Begin to start personalisation. 2. Adjust your NuraLoop’s ear buds by rotating them back and forth until you see two constant ticks (check marks) on the Nura app screen. Once you have a good fit, personalisation starts and takes 1—2 minutes. 3. Tap Personalised to hear music with your hearing profile. 4. Use the slider to adjust your Immersion. 5. Dial back and forth to adjust between Active Noise Cancellation (ANC) and Social Mode. 6.
nura Your NuraLoop This section contains everything you need to know about using your NuraLoop — Charging your NuraLoop Your NuraLoop’s battery provides 16+ hours of wireless use. To charge your NuraLoop’s battery: 1. Connect your NuraLoop to the USB-A charging cable (comes included). 2. Connect the cable to a computer or wall charger. The USB-A charging cable has an LED light that lights up when the NuraLoop is charging. The NuraLoop’s battery takes approximately two hours to fully charge.
nura Making and receiving voice calls with your NuraLoop When your NuraLoop is connected with Bluetooth, you can answer voice calls: • Directly on your phone. • By using your NuraLoop’s TouchDials. Connecting cables to your NuraLoop Your NuraLoop comes with an analog cable and a USB-A charging cable. Please note: the NuraLoop analog cable is designed to be worn behind your head. Do not attempt to disconnect the cable that runs between the two ear buds. This cable is not detachable.
nura Connecting your NuraLoop to other products You can connect your NuraLoop to other products in the following ways: Cable Bluetooth Quality Lossless Audio Voice Calls Near lossless (via Qualcomm® aptX™ HD audio) Control TouchDial Analog Please note: — The analog cable cannot be used when your NuraLoop’s battery is not charged. — The NuraLoop USB-A charging cable (comes included) is charging only. You cannot listen to audio with the USB-A cable.
nura Computers Mac Connect your NuraLoop with Bluetooth — 1. Disconnect the analog cable/ USB-A charging cable from your NuraLoop. 2. Put on your NuraLoop. When your NuraLoop is on your head, it automatically turns on and enters Bluetooth pairing mode. 3. Select > System Preferences > Sound. 4. Select NuraLoop XXX as the Output. XXX is your NuraLoop’s unique pairing number. PC Connect your NuraLoop with Bluetooth — 1. Disconnect the analog cable/ USB-A charging cable from your NuraLoop. 2.
nura Changing your NuraLoop’s ear tips The NuraLoop comes with three ear tip sizes. Try all the ear tip sizes to find the ones that best fit your ears. You’ll know you have a good seal if the sound around you quietens when you put on your NuraLoop. To change your NuraLoop’s ear tips: 1. Gently pull the ear tip to remove. 2. Push the new ear tip onto the NuraLoop. 3. Check the new ear tip is pushed on all the way. Cleaning the NuraLoop Your NuraLoop needs cleaning from time to time.
nura The Nura app Read on for everything that you need to know about the Nura app — Nura app features 3 4 2 5 1 6 7 9 8 1 Menu 2 Refer a friend 3 Add new profile 4 Share profile 5 Battery 6 Change profile 7 Unique hearing profile 8 Social Mode 9 Personalised Mode 10 Immersion 10 Customising your NuraLoop’s TouchDials The NuraLoop has a TouchDial on each side that you can tap, double tap and dial to perform useful functions.
nura Customising your Immersion 1. Open the Nura app. 2. Use the Immersion slider to choose your level of bass. Please note: always set your Immersion to a comfortable, moderate level when you’re using your NuraLoop for an extended period of time. Adjusting your Active Noise Cancellation (ANC)/ Social Mode Active Noise Cancellation reduces outside noise so you can focus on your music. Social Mode passes outside sound into your NuraLoop so you can hear conversations and the world around you.
nura Swapping, adding and deleting hearing profiles You can store up to three user’s hearing profiles on your NuraLoop at a time. Swapping profiles: 1. Open the Nura app. 2. Tap the current user’s name on the Nura app homepage. 3. Tap the hearing profile you’d like to switch to. Adding a hearing profile: 1. Open the Nura app. a. Tap the additional user button on the Nura app homepage. b. T ap the current user’s name on the Nura app homepage. Then, tap Create new hearing profile. 2.
Troubleshooting nura If you’re ever having trouble with your NuraLoop, read the following troubleshooting — lease note: do not attempt to disconnect the cable that runs between the two ear buds. P This cable is not detachable. Getting started troubleshooting Connecting to the Nura app troubleshooting If your NuraLoop won’t connect to the Nura app: • Close and reopen the Nura app. • Put on your NuraLoop and disconnect the analog cable/ USB-A charging cable.
nura Further troubleshooting: • Restart your device and then try connecting your NuraLoop with Bluetooth again. • I f you’ve previously connected your NuraLoop with Bluetooth, then remove your NuraLoop from your device’s paired device list and try connecting it again. • Reset your NuraLoop. Bluetooth cutting in and out? Bluetooth is designed for short distances, so you might experience some interference from time to time.
nura NuraLoop troubleshooting Comfort troubleshooting Like with any in-ear headphone, people with sensitive ear canals might experience some discomfort with the NuraLoop at first. If your NuraLoop is feeling uncomfortable, then try the different sized ear tips. If you’re still experiencing discomfort, don’t worry — you’ll get used to the fit and feel of the NuraLoop after a few days of use.
nura Sound quality troubleshooting To get the highest sound quality from your NuraLoop: • Use the NuraLoop analog cable to enable lossless transfer. • Use a lossless file format, such as AIFF, WAV or FLAC. • Use a lossless streaming service, such as Tidal. • I f you’re using Spotify or a similar streaming service, use the high-quality streaming option. • Check you’re not in Social Mode. • I f you’re using MP3 or MP3-like files, use high-bitrate MP3, Ogg or AAC files.
Need more help? nura Check our in-depth online help & support site nura.co/support You can also contact us via email and live chat at nura.co/contact Warranty Your NuraLoop is covered by a one-year limited warranty. Find out more at nura.co/returns nuraloop Manual Copyright © 2019 nura® Pty. Ltd.
Compliance nura nura ® adheres to the certification requirements for various regions around the world. For a full list of certifications please visit: nura.co/compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
nura 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
nura This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Apple, the Apple logo, iPad, iPhone, and iPod are trademarks of Apple Inc., registered in the U.S.