Omnilink® OM400G™ User Guide
Index – Contents Contents Title Page....................................................................................................................................................... 1 Index – Contents ........................................................................................................................................... 2 Notes and Copyrights ....................................................................................................................................
Notes and Copyrights All rights reserved. The trademarks used in this document are registered and/or proprietary trademarks of their respective owners and can be used only for lawful purposes. Functions and services are dependent on the networks. Some networks limit the usage of the tracking device and their applications. Contact your local network operator for more information as to the services supported by the network. This document was published by Omnilink Systems, Inc.
1 Device Images and Components
2 Device Features and Specifications Feature Location Technology Battery Life Charging Time Weight Total Waterproof Memory Offender Communication Offender Response Details GPS / AFLT / RF 30 Hours ~90 Minutes 8.4 oz. IP67 Rated for 1 Meter Depth Stores 10 Days of Data Sends Vibrate & Tone Single Button for Acknowledgement 3 Device Set-Up 3.
bottom pin entirely by pulling the pin downward. Then pull the device and the back plate apart from one another, removing them from the strap. Set the device aside. Step 2: Hold the back plate against the side of either leg, just above the ankle, with the inside of the back plate facing away from the body. If installing on a left leg, the end of the back plate that contains the locking posts should point toward the heel of the foot and the end with the locking guides should point toward the foot’s toes.
removed or repositioned by the wearer without destroying the strap or pins. The device must remain located at the outer side of the leg. 3.4 Finalizing Set-up in the FocalPoint® Offender Monitoring™ Application Once the device is installed, users must log into FocalPoint to clear the device tamper alerts and confirm that the device is being tracked successfully. Step 1: Log into FocalPoint Step 2: On the home page, search for any “Device Tamper” icons for the device.
Step 2: Select the beacon device number you wish to assign to the OM400 and select “Assign” Step 3: Choose the zone you would like to assign to this beacon from the zone selection page 7 Important Safety Information and Regulatory Notices Interference This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
800-863-5248 techsupport@omnilink.com For Orders and Returns, contact: Orders and Returns 800-228-1203 ordersandreturns@omnilink.
