Tower heater – OT-FH-2000T instruction manual Thank you for purchasing and trusting our Ozeanos product. Please read this manual carefully before using this product. Keep the manual in a safe place.
Safety instructions This device can only be used by children 8 years of age and older and by persons with limited physical, sensory or mental abilities or lack of experience and knowledge if they have been supervised or instructed on the safe use of the device and understand the dangers involved. Children must not play with the device. Cleaning and maintenance by the user must not be carried out by children without supervision.
the power supply. ※ Fan overheating protection: A thermal fuse is installed in the fan motor. If the motor overheats due to a number of accidents and the motor temperature reaches the level required to activate the thermal fuse, the fuse is blown to turn off the power supply. Product features Thank you for purchasing an original Ozeanos product. Our series of high quality tower heaters is characterized by a timeless design, a novel structure and a low weight.
Assembly instruction 1. Remove the two parts of the base from the box so that the holes of the two-piece base are aligned and the two parts form a complete base. (As shown in Figure 1) 2. Pass the power cord through the base, align the base with the holes on the fan body, and then secure the power cord under the base clamp to tighten the base with the fan body. (As shown in Figure 2) 3. When the base is disassembled, unscrew the screws first and then remove the base.
Performance specification and parameters Model Specification Rated voltage OT-FH-2000T Φ91*448mm 220-240V~ Rated frequency 50/60Hz Rated power 2000W Noise level ≤50dB(A) How to use I. Remote control Use a remote control (each button on the remote control is the same as on your product): First open the power switch on the back of the machine before use, the machine will sound an alarm while the power indicator is lit and the temperature is displayed on the control panel. 1.
※ The above procedure can also be carried out on the radiator control panel using the same procedure as described in the previous diagram. Note: OT-FH-2000T with automatic erase screen function under the heater, in progress. The control panel is automatically cleared if not operated for 3 minutes. Proper Use of the Remote Control 1. When using the remote control, make sure that the head on the front of the remote control is aligned with the recording window on the fan body. 2.
Circuit diagram Remote type (The technology is under continuous improvement, so no further notice will be given if there are any changes.) Maintenance: 1. Before cleaning this product, make sure that the unit is turned off. 2. Do not use water or other liquids to clean the electrical components (e.g. switching power supply, motor, etc.). The electrical components can be wiped with a clean cloth. 3. Do not use abrasives or solvents that may damage the surface to clean the product.
Warranty information 1. From the date of purchase, during the repair warranty period (one year), for any nonhuman defect, the user may submit proof of purchase, certificate of conformity and warranty card, and receive a free maintenance service at the designated service center of our company in China. 2.
