Professional Disc Jockey Products DM1001X • DM1002X STEREO MIXER with Crossfader Curve Switch OWNER’S MANUAL DM1001X NUMARK INDUSTRIES 11 Helmsman Road, North Kingstown, RI 02852 http://www.numark.
DM1001X/DM1002X CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
DM1001X/DM1002X NUMARK DM1001X/DM1002X STEREO MIXER INDEX Safety Information Product Registration Page 2 Introduction Features Page 4 Precautions Page 5 Face Panel Diagram Operating Instructions Page 6 Front Panel Diagram Page 7 Rear Panel Diagram Page 8 Connection Diagram Page 9 Specifications Page 10 Block Diagram Page 11 Warranty and Service Page 12 Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 3 http://www.numark.
DM1001X/DM1002X CONGRATULATIONS! You have purchased the D M 1 0 0 1 X / D M 1 0 0 2 X Stereo Mixer by Numark. This equipment features a completely new design and the latest in manufacturing technology to give you greater quality and better reliability than ever before. Your mixer gives your greater control than ever before in a compact and easy to use layout. Enjoy your new mixer and remember: BE CREATIVE! Thank you for buying Numark DJ products! FEATURES...
DM1001X/DM1002X IMPORTANT INFORMATION... Please read this entire manual before connecting the mixer to your system. For optimum performance: • Always make sure that AC power is OFF while making any connections. • Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. • Never use spray cleaners on the slide controls.
DM1001X/DM1002X DM1001X/DM1002X FACE PANEL DIAGRAM... GUIDED TOUR OF FEATURES AND OPERATING INSTRUCTIONS... If this is your first mixer, please read this entire manual before you begin operation. If you are an experienced DJ we highly recommend reading the manual so you may fully appreciate this newer technology. This mixer can be 10” rack-mounted or used as a free-standing unit.
DM1001X/DM1002X CUE SECTION 11. Cue Assign Toggle is used to route pre-fader channel audio to the Cue Monitor Section. 15. The Stereo Master Fader controls the overall output level. 12. The Program Mix controls the mix of C u e and Program audio in the headphones so that beats can be matched exactly and segues are smooth when a song is cued. 16. Stereo Output Level Indicator. This fast, accurate stereo meter tracks the output level.
DM1001X/DM1002X DM1001X/DM1002X REAR PANEL DIAGRAM... 7 7 1 2 3 4 REAR PANEL: INPUTS AND OUTPUTS 1. Power Connection. Plug your power adapter in here. See safety precautions on page 3 for proper treatment of the power cord. 2. GND is the grounding lug for all turntables. Always use this connection (your turntable cable should have a grounding wire). 3. The Stereo Main Outputs are low-impedance RCA connectors controlled by the Master fader. 4.
DM1001X/DM1002X CONNECTION DIAGRAM... Tape Deck Turntable 2 CD Player Turntable 1 Power Adapter Main Tape Deck Sound System w/ Amplifier Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 9 http://www.numark.
DM1001X/DM1002X SPECIFICATIONS... Inputs: Line: Mic: Phono: 10Kohm input impedance 1V rms sensitivity (for 1.22V output) 10 Kohm input impedance unbalanced 2V rms sensitivity (for 1.22V output) 60mV rms max input 47Kohm input impedance 1V rms sensitivity @ 1KHz (for 1.22V output) Outputs: Line: 7V rms max Headphone: .5 watt into 47ohm Distortion: less than 0.01% Signal to Noise Ratio (vs.
DM1001X/DM1002X BLOCK DIAGRAM... Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 11 http://www.numark.
Professional Disc Jockey Products Warranty and Service Information Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each new product manufactured and/or supplied by it to be free from defects in material or workmanship under conditions of normal use and service for 1 year, beginning on the date of purchase from an authorized Numark Dealer, but not to exceed 2 years from date of shipment by Numark.