BE Sport3 Sport Wireless Earbuds User’s Manual
User Manual Optoma NuForce Bluetooth BE Sport3 In Ear Headphones Regulatory model name: APBESPORTS 1
Contents • WHAT’S IN THE BOX • BE SPORT3 EARPHONES • THE BASICS Charging your BE Sport3 Checking battery level Bluetooth pairing Power On/ Power Off Wearing your BE Sport3 Handling phone calls Listening to music Pairing with a laptop
WHAT’S IN THE BOX BE Sport3 earphones (with inline controller and microphone) Silicon tips (in L/M/S) 2 types of silicon tips Total of 6 pairs ear tips SpinFit TwinBlade tips (1 pair) Stabilizers (in L/M) 3 colors, total of 6 pairs Cable loop for adjusting the length of cable Pouch
BE Sport3 EARPHONES 1. 2. 3. 4. 5. 6.
The BASICS Charging Your BE Sport3 Although your BE Sport3 in-‐ear headphones come with a partially charged battery, it is recommended that you fully charge your BE Sport3 before first use. 1. Open the charge port cover on the in line controller. 2.
Checking Battery Level You can check the battery level of your BE Sport3 with the LED indicator To check battery level: 1. Press the Power/Function, volume up, and volume down buttons simultaneously. 2. The LED indicator will flash red and blue simultaneously.
Bluetooth Pairing 1 2 3 Using your BE Sport3 for first time Pairing BE Sport3 with source device 1. Press and hold the BE Sport3’s Power/Function button for 6 seconds until the LED indicator light flashes blue/red. Your BE Sport3 is now in pairing mode. 2.
B. If left inactive in pairing mode, your BE Sport3 will automatically power off after 3 minutes. C. Your BE Sport3 can store pairing information for up to eight devices. To pair additional devices to your BE Sport3 ensure that your BE Sport3 is not concurrently connected to any device, then repeat the steps 1,2,3 outlined above.
section. If you have stored pairing information for multiple devices and more than one of those devices is Bluetooth enabled, the BE Sport3 will automatically connect with the most recently paired device and will also enable multipoint connection. For more information read section “Multipoint Connections”.
Magnetic caps at the end of the earphones let users lock the earphones together and secure them around user’s neck for ease of use. Handling Phone Calls When your BE Sport3 are connected to a Bluetooth-‐enabled smartphone you can handle your phone calls directly using your BE Sport3 in ear headphones.
Pairing with a Laptop The connection instructions below apply to owners of Windows 7, 8, 8.1 and 10. 1. Power your PC/Laptop 2. Find “Bluetooth Settings” 3. Switch your laptop Bluetooth to “On” 4. Turn the BE Sport3 to “Pairing Mode” 5. When the BE Sport3 is discovered by your laptop left click on “Pair” 6.
Pairing with a Mac The connection instructions below apply to owners of all current and recent iOS versions 1. Power your Mac 2. Open “System Preferences” 3. Click on the Bluetooth symbol 4. Turn the Optoma NuForce BE Sport3 to “Pairing Mode” 5.
MISCELLANEOUS Multipoint Connections If you have stored pairing information for multiple devices and more than one of those devices have Bluetooth enabled at the same time, your BE Sport3 will enable multipoint connection.
Voice Prompts list The BE Sport3 are pre-‐loaded with English voice prompts “Power On” “Power Off” “Full Battery” “Battery at 50%” “Battery Low” “Primary device connected” “Secondary device connected” “Pairing Mode Activated” “Voice Dial” Audio option Action Activate voice prompts Press the Power/Function and Volume Up buttons simu
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE EU Regulatory Conformance Hereby, Optoma Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Notice: Observe the national local regulations in the location where the device is to be used.
Specification Connection type Bluetooth 2.4Ghz Bluetooth type V4.1 HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4 , Bluetooth profile aptX, AAC Codec SBC, aptX, AAC Cable length 580 +/-‐ 20 mm Driver Type Dynamic Driver size 6 mm Impedance 16 Ohm Battery life (estimated) Up to 10 hours Lithium-ion battery, Cylindrical Type, Battery type Typical 3.
www.optoma.