BE Sport3 Wireless Bluetooth in-ear headphones User manual Regulatory model name: APBESPORTS
Contents WHAT’S IN THE BOX BE SPORT3 EARPHONES THE BASICS Charging your BE Sport3 Checking battery level Bluetooth pairing Power On/ Power Off Wearing your BE Sport3 Handling phone calls Listening to music Pairing with a laptop Pairing with a Mac MISCELLANEOUS Multipoint connections Restoring factory settings Voice prompts list Disclaimer FCC Interference statement CE Trademark attribution Specification 2
WHAT’S IN THE BOX BE Sport3 earphones (with inline controller and microphone) Silicon tips (in L/M/S) 2 types of silicon tips Total of 6 pairs ear tips SpinFit TwinBlade tips (1 pair) Stabilizers (in L/M) 3 colors, total of 6 pairs Cable loop for adjusting the length of cable Pouch Charging cable (Micro-USB) Basic user’s manual Safety Instruction 3
BE Sport3 EARPHONES 1. 2. 3. 4. 5. 6.
The BASICS Charging Your BE Sport3 Although your BE Sport3 in-ear headphones come with a partially charged battery, it is recommended that you fully charge your BE Sport3 before first use. 1. Open the charge port cover on the in line controller. 2. The charge cable should be connected to the charge port and either to a PC or a dedicated USB charger. 3. When charging, the LED indicator is red. 4. LED Indicator turns blue once charging is complete. NOTE: It takes up to 2.
Checking Battery Level You can check the battery level of your BE Sport3 with the LED indicator To check battery level: 1. Press the Power/Function, volume up, and volume down buttons simultaneously. 2. The LED indicator will flash red and blue simultaneously.
Bluetooth Pairing 1 2 3 Using your BE Sport3 for first time Pairing BE Sport3 with source device 1. Press and hold the BE Sport3’s Power/Function button for 6 seconds until the LED indicator light flashes blue/red. Your BE Sport3 is now in pairing mode. 2. Turn on Bluetooth® on your source device, then select “Optoma NuForce BE Sport3” once it appears on the device list. NOTE: Consult your source device’s user manual for instructions on activating Bluetooth. 3.
B. If left inactive in pairing mode, your BE Sport3 will automatically power off after 3 minutes. C. Your BE Sport3 can store pairing information for up to eight devices. To pair additional devices to your BE Sport3 ensure that your BE Sport3 is not concurrently connected to any device, then repeat the steps 1,2,3 outlined above.
If you have stored pairing information for multiple devices and more than one of those devices is Bluetooth enabled, the BE Sport3 will automatically connect with the most recently paired device and will also enable multipoint connection. For more information read section “Multipoint Connections”.
Handling Phone Calls When your BE Sport3 are connected to a Bluetooth-enabled smartphone you can handle your phone calls directly using your BE Sport3 in ear headphones.
Pairing with a Laptop The connection instructions below apply to owners of Windows 7, 8, 8.1 and 10. 1. Power your PC/Laptop 2. Find “Bluetooth Settings” 3. Switch your laptop Bluetooth to “On” 4. Turn the BE Sport3 to “Pairing Mode” 5. When the BE Sport3 is discovered by your laptop left click on “Pair” 6. Right click on the speaker symbol at the bottom right side of the screen 7. From the dropdown menu right click on the “Playback Device” 8.
Pairing with a Mac The connection instructions below apply to owners of all current and recent iOS versions 1. Power your Mac 2. Open “System Preferences” 3. Click on the Bluetooth symbol 4. Turn the Optoma NuForce BE Sport3 to “Pairing Mode” 5. When the Optoma NuForce BE Sport3 is discovered by your Mac click on “Pair” 6.
MISCELLANEOUS Multipoint Connections If you have stored pairing information for multiple devices and more than one of those devices have Bluetooth enabled at the same time, your BE Sport3 will enable multipoint connection. Multipoint connection allows your BE Sport3 to hold connections with two devices at the same time while playing audio signal from only one of the two devices.
Voice Prompts list The BE Sport3 are pre-loaded with English voice prompts “Power On” “Power Off” “Full Battery” “Battery at 50%” “Battery Low” “Primary device connected” “Secondary device connected” “Pairing Mode Activated” “Voice Dial” Audio option Action Activate voice prompts Press the Power/Function and Volume Up buttons simultaneously for 2 seconds Turn off voice prompt Press the Power/Function and Volume Down buttons simultaneously for 2 seconds Disclaimer Please be advised, the BE Sport3 is eq
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE EU Regulatory Conformance Hereby, Optoma Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Notice: Observe the national local regulations in the location where the device is to be used. Trademark Attribution Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies international, Ltd.
Specification Connection type Bluetooth type Bluetooth profile Codec Bluetooth 2.4Ghz V4.1 HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4 , aptX, AAC SBC, aptX, AAC Cable length 580 +/- 20 mm Driver Type Dynamic Driver size 6 mm Impedance 16 Ohm Battery life (estimated) Battery type Microphone sensitivity Frequency response Sensitivity power consumption Up to 10 hours Lithium-ion battery, Cylindrical Type, Typical 3.
www.optoma.
