BE6i Bluetooth in-ear headphones User manual Regulatory model name: APBELI
Contents WHAT’S IN THE BOX BE6I EARPHONES THE BASICS Charging your BE6i Checking battery level Bluetooth pairing Power On/ Power Off Wearing your BE6i Handling phone calls Listening to music Pairing with a laptop Pairing with a Mac MISCELLANEOUS Multipoint connections Restoring factory settings Voice prompts list Disclaimer FCC Interference statement Specification 2
WHAT’S IN THE BOX BE6i earphones (with inline controller and microphone) Silicon tips (in L/M/S) 2 types of silicon tips Total of 12 silicon ear tips Comply tips (two pairs in L/M)* Stabilizers (1 pair) Cable loop for adjusting the length of cable Carry case Charging cable (Micro-USB) Basic user’s manual Safety Instruction *For replacement or additional ear tips www.complyfoam.com .
BE6i EARPHONES 1. 2. 3. 4. 5. 6.
The BASICS Charging Your BE6i Although your BE6i in-ear headphones come with a partially charged battery, it is recommended that you fully charge your BE6i before first use. 1. Open the charge port cover on the controller. 2. The charge cable should be connected to the charge port and either to a PC or a dedicated USB charger. 3. When charging, the LED indicator is red. 4. LED Indicator turns blue once charging is complete. NOTE: It takes up to 2.5 hours to fully charge the BE6i.
Checking Battery Level You can check the battery level of your BE6i with the LED indicator * To check battery level: 1. Press the Power/Function, volume up, and volume down buttons simultaneously. 2. The LED indicator will flash red and blue simultaneously.
Bluetooth Pairing 1 2 3 Using your BE6i for first time Pairing BE6i with source device 1. Press and hold the BE6i’s Power/Function button for 6 seconds until the LED indicator light flashes blue/red. Your BE6i is now in pairing mode. 2. Turn on Bluetooth® on your source device, then select “Optoma NuForce BE6i” once it appears on the device list. NOTE: Consult your source device’s user manual for instructions on activating Bluetooth. 3.
off after 3 minutes. C. Your BE6i can store pairing information for up to eight devices. To pair additional devices to your BE6i ensure that your BE6i is not concurrently connected to any device, then repeat the steps 1,2,3 outlined above. In case where your BE6i have already stored pairing information for eight devices and a ninth device is paired, the stored information for the very first device will be deleted.
To turn the BE6i to OFF, push Power/Function button for about 3 seconds until the LED indicator turns red and you hear the “Power off” ” when voice prompt be activated or a beep if the voice prompt is not used. Wearing Your BE6i To ensure a secure and comfortable fit when wearing your BE6i: 1. Install the stabilizers on the BE6i. 2. Select right size of ear tips and install tips on BE6i. 3. Rotate the stabilizers and place the BE6i into each ear so that they are positioned comfortably.
Handling Phone Calls When your BE6i are connected to a Bluetooth-enabled smartphone you can handle your phone calls directly using your BE6i in ear headphones.
Pairing with a Laptop The connection instructions below apply to owners of Windows 7, 8, 8.1 and 10. 1. Power your PC/Laptop 2. Find “Bluetooth Settings” 3. Switch your laptop Bluetooth to “On” 4. Turn the BE6i to “Pairing Mode” 5. When the BE6i is discovered by your laptop left click on “Pair” 6. Right click on the speaker symbol at the bottom right side of the screen 7. From the dropdown menu right click on the “Playback Device” 8.
Pairing with a Mac The connection instructions below apply to owners of all current and recent iOS versions 1. Power your Mac 2. Open “System Preferences” 3. Click on the Bluetooth symbol 4. Turn the Optoma NuForce BE6i to “Pairing Mode” 5. When the Optoma NuForce BE6i is discovered by your Mac click on “Pair” 6.
MISCELLANEOUS Multipoint Connections If you have stored pairing information for multiple devices and more than one of those devices have Bluetooth enabled at the same time, your BE6i will enable multipoint connection. Multipoint connection allows your BE6i to hold connections with two devices at the same time while playing audio signal from only one of the two devices.
Voice Prompts list The BE6i are pre-loaded with English voice prompts “Power On” “Power Off” “Full Battery” “Battery at 50%” “Battery Low” “Primary device connected” “Secondary device connected” “Device disconnected” “Mute On” “Mute Off” “Pairing Mode Activated” “Redial Last Number” “Transfer Audio” “Voice Dial” “Voice Prompts Enabled” Audio option Action Activate voice prompts Press the Power/Function and Volume Up buttons simultaneously for 2 seconds Turn off voice prompt Press the Power/Function and
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Specification Connection type Bluetooth 2.4Ghz Bluetooth type V4.0+EDR Compliant Bluetooth profile Codec HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4 , aptX, AAC SBC, aptX, AAC mm Cable length 550 Driver Type Dynamic Driver size 10 mm Impedance 20 Ohm Battery life (estimated) Battery type Microphone sensitivity Frequency response Sensitivity power consumption Up to 8 hours Lithium-ion battery, Cylindrical Type, Typical 3.
www.optoma.