SL3601 Smart Lock User Manual for Adding APP NUCTECH COMPANY LIMITED 1
I. Product description A WiFi smart module is installed in a smart device, through which the smart device connects to the home WiFi network to realize the information interconnection between the smart device and the APP of mobile phone. When the APP is used for the first time, you need to register an account with your mobile phone, and the account can backup the relevant configuration so that the configuration can be restored automatically when the mobile phone is replaced. II. Quick setting 2.
YZYJ APP supports the backup and restore of configuration files, and can synchronize the configuration of the APP on different mobile devices with a same registered account, including the device list and other information. The operating steps are as follows: Enter the page "Me" and tap the menu "Backup" or "Restore". "Backup" means to upload the configuration on the APP to the cloud server, and "Restore" means to download the configuration on the cloud server to the APP. IV.
SL3601 Smart Lock User Manual NUCTECH COMPANY LIMITED 1
Instructions and verification manual I Dear users, welcome to use this smart lock. Please check the product list carefully and read the operating manual before you install and use the product. Please choose professionals to install the door lock and operate it according to the installation standard provided by our company. Don’t disassemble and assemble the door lock without permission, and protect relevant sealing signs so as to avoid unnecessary troubles during the quality maintenance period.
5 6 pops up. At this moment, it can be locked by lifting the external handle back, and the safety button can be pressed after it is locked (must be sure). When the back locking button is rotated horizontally, there will be a voice indicating "The door is locked back", and the triggle bolt can be controlled to pop Back locking test up. When the button is rotated vertically, the display screen will display "The door is unlocked" and the triggle bolt can be controlled to retract.
[1] Settings [2] Voice Setting [3] Battery holder [4] Safety button [7] Battery holder cover [5] Internal handle [6] Back locking thumb turn 3. Lock body Dead bolt Triggle bolt Latch bolt Anti-theft bar Anti-theft bar III Product list and installation exploded-view drawing Please check the following list carefully after unpacking. If you find any omission, please contact our company or local agents in time. Product list No.
4 Cross pan head external tooth two-combination screw 3 M5X35 is adaptive to 50~70mm thick doors 5 Cross pan head external tooth two-combination screw 3 M5X65 is adaptive to 70~90mm thick doors 6 Cross pan head external tooth two-combination screw 3 M5X25 is adaptive to 40~50mm thick doors 7 Square bar 1 8 Back locking square bar 1 9 Allen wrench 1 Used to fix external handle 10 Square bar guide holder (plastic part) 1 Used for installation guidance of internal bottom plate (must be
screws. When opening the door right outwards or inwards, rotate the handle to No.1 position; when opening the door left inwards, rotate the left direction to No.2 position.
V Guidance for setting smart lock 1. Register the first Administrator password in the initial state The door can be unlocked by any fingerprint or password in the initial state, so it is necessary to enter the Administrator password in time to enter the administration mode for the follow-up operations. The first Administrator password of this smart lock can be registered by pressing the setting key on the back surface plate.
Add Admin FP Add User FP Add Temp FP Add Admin PW Add Temp/User PW Add Fingerprint Add Password Add Card Add Card Del Admin FP Del User FP Del Temp FP Add User Del User System Settings Record Inquiry Del Fingerprint Del Password Del Card Del Admin PW Del Temp/User PW Del Card Set Time Open Mode Normally Open Store status Voice Setting Language Restore Factory Information Record Inquiry V Guidance for setting smart lock 3. Add user 3.
Add User Del User System Settings Record Inquiry Add Fingerprint Add Password Add Card Admin FP: 001 Add Success Add Admin FP Add User FP Add Temp FP Add Admin FP 001 Enter Again Please Select ID ID: 001/010 ID (001--010) Add Admin FP 001 Enter FP 3.1.2 Add user fingerprint The door can be unlocked by the user fingerprints only in the common mode and security mode, and the adding method is similar to that for adding the administration fingerprints.
V Guidance for setting smart lock Add User Del User System Settings Record Inquiry Add Fingerprint Add Password Add Card Modify Admin PW Add Temp/User PW Admin PW Modify Success Modify Admin PW Enter Password Modify Admin PW Enter Again 3.2.2 Add user password: The user password has the same permission with the user fingerprint. Please refer to modifying Administrator password and adding user fingerprint for the specific addition steps, which are described briefly here.
Add User Del User System Settings Record Inquiry Del Fingerprint Del Password Del Card Del Admin FP Del User FP Del Temp FP Admin FP 001 Del Success 001 Admin FP 002 Admin FP 003 Admin FP Confirm Delete NO YES 4.2 Delete password The administrator passwords cannot be deleted, but the temporary and user passwords can be deleted. Refer to deleting fingerprint for the concrete operation steps. The LED indicator light will turn green after successful deletion.
Add User Del User System Settings Record Inquiry Set Time Open Mode Normally Open Set Time Date: 16-01-01 Time: 00-00-00 Back(*) OK(#) Setting Succeed (2) [Unlocking Mode]: There are three unlocking modes: fingerprint/password, fingerprint + fingerprint, and fingerprint + password. In fingerprint + fingerprint and fingerprint + password unlocking modes, the fingerprint and password should not be those of the temporary users.
(7) [Restore Factory]: The smart operating system can be initialized by the restore factory function. After moving the cursor to [Restore Factory], press [#] to confirm or press [*] to cancel it. The factory setting can be restored by pressing the setting key on the back surface plate for 5s.
▲9. In the future, the software of the smart lock can be adjusted, as needed, to adapt to different networking modules, realizing the networking function in the future. Refer to the networking manual for the adding process and application method. Safety precautions 1. The users shall not repair this product at will. 2. Do not close the door for the first time of registration. 3. Please keep the password carefully.
(1) Open the sliding cover to wake up the entire system, or touch the screen lightly to wake up the system. (2) Enter any previously added non-temporary fingerprint, and then enter another non-temporary fingerprint when you hear "Enter Fingerprint" after beeping (3) When the LED indicator light turns green or you hear "Ding Dong", press down the handle to open the door. 6.3. [Fingerprint + password] mode In this mode, you can unlock the door with any non-temporary fingerprint + administration password.
VII Main technical parameters 1. Main technical parameters: The main technical parameters of this smart lock are shown in the following table: No.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.