NTN 900 MHz WIRELESS TWO-WAY SYSTEM Components of System HDT (Host Data Terminal) RDT (Remote Data Terminal) CHARGER TRAY (5 RDT could be charged at once) HDT DC CABLE (Turn PC 4 pin into DC jack) INTERNAL RS-232 CABLE CHARGER ADAPTER HDT ANTENNA Installation: NTN 900M Hz wireless two-way system is applicable with NT N's group activities in a place such as restaurant.
FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 16 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NTN RF system Installation Manual Preliminary Draft Customer/ Representative Support (800) 745-4686 (BORE This is not a consumer product, and it is intended for use by NTN employees and representatives only. All other uses are strictly prohibited.
Table of Contents Overview 1 RF Delivery System 2 Site setup with NTN 3 Testing Procedures 4 Appendix 5 RF Delivery Guidelines A Overview The NTN Communications Inc. interactive hospitality system installation consists of four major elements: 1) Down link 2) Local RF delivery system 3) Video integration 4) Modem return path The satellite data receiver (DRUID, RF transceiver (Base Station), video card, and modem are all integrated in the computer. The system receives data from satellite via a .
2) RF delivery System Base Station Base Station, a transceiver that is installed inside the PC, transmits and receives signals to and from the play makers and the PC. It has a TNC connector on the front and 2 indicator (Ready, Noise) lights. Antenna Antenna is the interface between the Base Station (host) and the Play makers (remotes). Therefore, it plays a crucial part in NT N's RF delivery system.
Locate antennas above the ceiling. Mix RG6 and REORG Splice cable a Coil excess cable FCC Disclaimer This equipment has been tested and found ta comply with the limits for a Class B Computing Device Peripheral, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
A Satellite dish o_o Existing Cable T video distribution system SN Modulator Play Area Ant; — aan RG 6 Cable -SCENT. Video -Sat.
0. © Contact NTN Customer Support upon completion for documentation and nonvoter testing at (800) 745-4686 Play makers frequencies and number verification 1) Presses “START? then press “N” within one second to enter Play maker management function; you will be prompted for password: default is You will see the following displays: 1)IWS 2)Seq 3)Pwd chad erst wits 7)xxx Exit WS is to set Play maker number (1-200). In the near future, the Play maker number will be eliminated.