Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 135 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
] Introduction Safety Instruction Caution: Use a power cord that matches the AC voltage of the power outlet and had been approved by and complies with the safely standard of your particular country. IBM PC/XT/AT, PS/2, MEGA, VGA, 8514/A and XGA are registered trademarks of International Business Machines Corporation. Apple and Macintosh are registered trademarks of Apple Computer Inc. Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ty Introduction Introduction Congratulations on your purchase of the PN 7701 color Monitor! The PN 7701 monitor includes Microsoft’s Plug and Play, the On Screen Manager (OSMIUM, as well as all the unique features you expect. The PN 7701 provides you with automatic compatibility with multiple operating platforms and a vast array of graphics standards allowing resolution upgrades without upgrading the monitor.
Introduction oe) Power Manager [PM(Intelligent Power Manager) System is an innovative power saving utility that complies with both the EPA’s Energy Star requirements. Energy Star products use less than 30 watts when in the main power saving mode. When in the maximum power-down mode, the PN 7701 monitor will consume approximately 10% of the total power drawn under normal operation.
Introduction 4 Multiple Frequency Technology Multiple Frequency Technology automatically adjusts the monitor to the video card’s scanning frequency, displaying the resolution you desire. Increased refresh rates at all resolutions provide a flicker-free image. The clearer image is easier on your eyes and extends your viewing time.
5 Recommended use Recommended use For optimum performance when setting up and using the PN 7701 color monitor, please note the following: — The optimum monitor position is away from direct sunlight. — Allow adequate ventilation around the monitor so that heat can properly dissipate. — Use the monitor in a clean, dry area. — Handle with care when transporting. — We recommend to adjust the brightness in a way that the background raster disappears.
Connection to your Personal Computer 6 Connection to Your Personal Computer The PN 7701 color monitor complements NEC computer. To attach the PN 7701 monitor to your system, follow these instructions: 1. Turn off the power to your computer and PN 7701 monitor. 2. Connect the PN 7701 monitor’s video cable to the display card’s connector on the computer. Tighten screws on all connector. 3. Connect one end of the power cable to the PN 7701 monitor and the other end to the power outlet. 4.
7 i Controls Controls: @® “SELECT” : To display OSM windows, mode changes, or activate the degassing or OSM window color selection. ©@ CONTROL BUTTON Without OSM Adjust the contrast. With OMS--Select Icon and adjust. @ “RESET”: Return the adjustment item to the factory setting. @ Power indicator LED: The LED indicate Power management state. ® POWER SWITCH: Push/push to turn the monitor on and off. ® Power Input: To connect with the power cord.
On-Screen Manageress) 8 On-Screen Manager (OSM) To display OWM widow, push “SELECT” button. To quit OSM window, you just choice “EXIT” ,and push “SELECT” button. When OSM window is displayed over 10 seconds but no active, then the window will be disappeared automatically. ® Menu Construction When you push “SELECT “ button, first you can see “Signal status window” with the horizontal and vertical frequencies of the present signal. When you push “SELECT” button again, then you can see “Icon select window”.
9 . On-Screen Manageress) Fig 1 "Signal status window" Push "SELECT" J at Push "SELECT" Fig 3 "Adjustment window" Push "SELECT" sss rm ; " Push Fig 2 "Icon select window t "SEL BCT" | Adjustment bar Note 1: Item of “DEGASSED, “OSGOOD, and “EXIT” can not be changed to “Adjustment window”. Note 2: Except the present signal that can not be returned to the factory setting. In case the present signal that can not be factory aligned one, the reset function is not activated.
Specifications @ Function explanation OQ DOB Omg 050 pb Horizontal position: Moves the image horizontally left or right. Vertical position: Moves the image vertically up or down. Horizontal size: Increases or decreases the horizontal size of the image. Vertical size: Increases or decreases the vertical size of the image. Pincushion/Barrel: Increases or decreases the curvature of the sides either inward or outward. Trapezoid: Increases or decreases the bottom of the screen to be the same as the top.
Specifications R Red Co lour Control: Adjust the red contrast of the display. G Green Co lour Control: Adjust the green contrast of the display. B Blue Co lour Control: Adjust the blue contrast of the display. Or Brightness: Adjust the overall image and background screen ' brightness. Contrast: Adjust the image brightness in relation to the background. (Contrast control is also effective with button even though OSM window is not existing.
Troubleshooting/Support Troubleshooting/Support Problem Check These Items No Picture The video card should be completely seated in its slot. Power Switch should be in the ON position. The signal cable should be completely connected to the video card/computer. Check the connector for bent or pushed-in pins. Image is scrolling or unstable Signal cable should be completely attached to the computer.
13 Specifications Specifications Picture Tube : 43cm(17 inches) (40cm(15.6 inches)viewable image) size flat square CRT, 90 degree deflection. Dot type black matrix, Non-glare anti-static coating. Medium short persistence. Dot pitch 1 0.28mm Input signal : Video: Analogue 75 (2, positive Sync.: Separate sync. : TTL level Horizontal sync.: Positive/Negative. Vertical sync. : Positive/Negative. Composite sync.
Specifications Lo [RE 14 Environmental Operating : Temperature: Consideration ~~ Humidity Condensation) Storage : Temperature: -20% to 60% Humidity Condensation) *NEC cites recommended resolutions for optimal display performance. ++ Maximum resolution based on horizontal and vertical frequencies only. Technical specifications are subject to change without notice.