Datasheet

ManualsBrandsNovotechnik ManualsAngle & Rotary SensorsAngular Hall Effect Position Sensor 360° 0 ... 10 VDC

Special features

• non-contacting, magnetic

technology

• measuring range up to 360°

• available with push-on

coupling or marked shaft

• simple mounting

• protection class IP54, IP65,

IP67

• long life

• very small hysteresis

• internal resolution 12 bit

• independent linearity ±0.5 %

• single output and redundant

versions

• digital interface versions -

see separate data sheet

• european E1 approved

The RSC 2800 sensor utilizes

a contactless magnetic

measurement technology to

determine the measured angle.

Unlike conventional Hall

sensors, the orientation of the

magnetic field is measured.

The output is available as either

analog voltage or current.

The housing is made of a

special high grade temperature-

resistant plastic material.

Elongated slots allow simplicity

in mounting together with ease

of mechanical adjustment.

Three shaft options are

available, including a push-on

coupling option that ensures

fast and simple installation.

The transducer is not sensitive

to either dirt or humidity.

NOVOHALL

Rotary Sensor

non-contacting

Series RSC2800

analog

Description

Housing High grade, temperature resistant plastic

Shaft Stainless steel

Bearings Bronze sleeve bearing

Electrical connections Cable AWG 26 (0.14 mm

)

Cable AWG 20 (0.5 mm

)

Connector M12

Page 1

Summary of content (7 pages)

PAGE 1
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors, the orientation of the magnetic field is measured. The output is available as either analog voltage or current. The housing is made of a special high grade temperatureresistant plastic material. Elongated slots allow simplicity in mounting together with ease of mechanical adjustment.
PAGE 2
Output Characteristics and Pin Assignment Output characteristic one-channel versions Recommended dimensions of driving shaft for RSC2821 / RSC2841 / RSC2871 Parallel offset < 0.05 mm. Shaft designs Connection assignment M12 connector Cable GND pin 3 brown Supply voltage Ub pin 1 green Output 1 pin 2 white Not assigned / output 2 pin 4 yellow Cable shielding connect to GND.
PAGE 3
Technical Data for Industrial Applications Technical Data - Versions for Industrial Applications Design optimized for use in machine and plant applications. High reliability. Simple interface to PLC. Many options.
PAGE 4
Ordering Specifications for Industrial Applications Supply Ub 1: 24 V (18 ... 30 V) 2: 5 V (4.5 ... 5.5 V) Ordering specifications Preferred types printed in bold: • reduced delivery time for up to 25 pieces • best low-volume pricing Output signal - Ub = 24 V 1: 0.1 ... 10 V 2: 4 ... 20 mA Output signal - Ub = 5 V 1: 0.25 ... 4.75 V ratiometric to Ub 2: 0.5 ... 4.
PAGE 5
Technical Data for Mobile Applications Technical Data - Versions for Mobile Applications These versions are optimzed for the high requirements in mobile applications.
PAGE 6
Ordering Specifications for Mobile Applications Ordering specifications Supply Ub 2: Ub = 5 V (4.5 ... 5.5 V) Preferred types printed in bold: • reduced delivery time for up to 25 pieces • best low-volume pricing Output signal 1: 0.25 ... 4.75 V ratiometric to Ub (5...95 %) 2: 0.5 ... 4.5 V ratiometric to Ub (10,,,90 %) Output characteristics 1: rising CW 2: rising CCW Other characteristics on request Electrical connection 252: round cable 4-pol., 1 m unshielded 256: round cable 4-pol.
PAGE 7
Novotechnik Messwertaufnehmer OHG Accessories Connector-System M12 Postfach 4220 73745 Ostfildern (Germany) Horbstraße 12 73760 Ostfildern (Germany) Telefon +49 711 4489-0 Telefax +49 711 4489-118 info@novotechnik.de www.novotechnik.de © 01/2016 Subject to changes. Printed in Germany.