Datasheet

ManualsBrandsNovotechnik ManualsAngle & Rotary SensorsAngular Hall Effect Position Sensor 360° 0 ... 10 VDC

NOVOHALL

Angle Sensor

non-contacting

Series RSC2800

analog

Special features

• non-contacting, magnetic

• electrical range up to 360°

• available with push-on

coupling or marked shaft

• simple mounting

• protection class IP54, IP65,

IP67

• long life

• very small hysteresis

• internal resolution 12 Bit

• independent linearity ±0.5 %

• single and redundant ver-

sions

• versions with digital inter-

face see separate date sheet

The contactless sensor utilizes

the orientation of a magnetic

field for the determination of

the measurement angle.

The magnetic field orientation

is captured with an integrated

circuit. An analogue output

signal represents the calcula-

ted angle.

The housing is made of a spe-

cial high grade temperature-

resistant plastic material.

Fixings are in the form of elon-

gated slots which allow simpli-

city in mounting together with

ease of mechanical adjust-

ment.

The special backlash-free

push-on coupling ensures

extremely quick and simple

installation. The transducer is

not sensitive to either dirt or

humidity.

Electrical connection is made

via a shielded cable which is

sealed into the housing, M12

connector on request.

Description

Housing high grade, temperature resistant plastic

Shaft stainless steel

Bearings bronze sleeve bearing

Electrical connections shielded cable AWG26 (0.14 mm

)

M12 connector

Summary of content (4 pages)

PAGE 1
NOVOHALL Angle Sensor non-contacting Series RSC2800 analog The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The magnetic field orientation is captured with an integrated circuit. An analogue output signal represents the calculated angle.
PAGE 2
Output characteristic one-channel versions Messwinkel / measuring range Output characteristics multi-channel versions Messwinkel measuring range Messwinkel / measuring range Messwinkel measuring range cw: view on shaft Shaft designs Recommended hole pattern 2 x φ 4,3 or 2 x M4 Recommended dimensions of driving shaft for RSC2821 / RSC2841 / RSC2871 Parallel offset < 0.05 mm.
PAGE 3
Type designations RSC - 28 _ _ - _ _ _ - 2 _ _ - _ _ _ ratiometric RSC - 28 _ _ - _ _ _ - 1 1 _ - _ _ _ voltage RSC - 28 _ _- _ _ _ - 1 2 _ - _ _ _ current Mechanical Data Dimensions see dimension drawing Mounting with 2 M4 screws and washer Starting torque of mounting clmaps at housing flange 400 Ncm Mechanical travel 360 continuous ° Permitted shaft loading (axial and radial) static or dynmaic force 20 N Torque 1.0 (IP67); 0.5 (IP65); 0.
PAGE 4
Novotechnik Messwertaufnehmer OHG Postfach 4220 73745 Ostfildern (Ruit) Horbstraße 12 73760 Ostfildern (Ruit) Telefon +49 711 44 89-0 Telefax +49 711 44 89-118 info@novotechnik.de www.novotechnik.de © 12/2012 Subject to changes Printed in Germany. Ordering specifications Operating voltage Ub 1: Ub = 24 V (18 ... 30 V) 2: Ub = 5 V (4.5 ... 5.5 V) Output signal Ub = 24 V 1: 0.1 ... 10 V 2: 4 ... 20 mA Preferred types printed in bold: • delivery time up to 25 pcs.