Camden Bluetooth stereo headset U ser guide
Camden User Guide V7 Content 1. Welcome ....................................................................................................................................................................... 3 2. Safety ............................................................................................................................................................................ 4 3. Before use ......................................................................................................
Camden User Guide V7 1. WELCOME Congratulations on choosing Camden, the universal Bluetooth stereo headset by novero. Due to its foldable on-ear design, it is very comfortable to wear and portable. Please read this user guide carefully before use. Bluetooth is a standard of short range radio communication technology for the purpose of high transmission rate among mobile phones, computers, printers, PDAs and other devices. (See also Glossary entry for Bluetooth, chapter 8).
Camden User Guide V7 2. SAFETY Using Camden Turn the volume down to its lowest level. – Then put the headset on and slowly adjust the volume to a comfortable level. Keep the volume at the lowest level possible and avoid using the headset in noisy environments where you may be inclined to turn up the volume. – If you need to adjust the volume, do it slowly to avoid sudden, unintended loud sounds.
Camden User Guide V7 3. BEFORE USE 3 3.1 Overview 1 /2 4 5 7 1 LED 2 6 LED indicator Multi-function button (MFB) 3 USB USB charging connector 4 VOL Volume + / Volume - 5 Next track / Previous track 6 AUX Audio AUX connector 7 MIC Microphone 3.2 Sales package content The Camden comes along with these useful accessories: _ Charging cable _ 3.5 mm audio cable _ Quick guide Copyright 2013 novero. All rights reserved.
Camden User Guide V7 4. HOW TO TO USE 4.1 Charging Camden Your Camden comes with a built-in rechargeable battery. Prior to using it for the first time, it is recommended to completely charge the battery. When the headset is in low power status, the red LED flashes twice and the headset emits three tones every 20 seconds. Please recharge the battery of the headset. Connect the provided charging cable to a computer or laptop USB port. The red LED is on while charging. It takes about 2.
Camden User Guide V7 4.4 Pairing Camden with Bluetooth devices Prior to using your Camden, you have to pair it with a Bluetooth-enabled device, e.g. your mobile phone, music player or PC/laptop.
Camden User Guide V7 _ After pairing is successful, the headset and the mobile phone will remember each other, and there will be no need to re-pair next time. _ Every time the headset is turned on, it will automatically connect to the last connected device. If you want to pair it with other devices, please turn off the Bluetooth function of your last connected devices first and pair the headset with the new device according to steps 1 to 6 mentioned above.
Camden User Guide V7 4.5 Turning on/off Camden Function Operation LED indicator Indication tone Turning on Press and hold MFB button for 3 to 5 seconds until blue LED flashes Blue LED is on for 1 second A long “beep” tone Turning off Press and hold MFB button for 3 to 5 seconds until red LED flashes Red LED is on for 1 second A long “beep” tone Note In order to save power, the headset will automatically turn off if no device can be connected after 5 minutes.
Camden User Guide V7 4.6 Music playback with Camden After pairing and connecting your headset to a Bluetooth mobile phone or Bluetooth music player, you can enjoy your music with the headset.
Camden User Guide V7 4.
Camden User Guide V7 4.
Camden User Guide V7 5. MAINTENANCE AND C ARE Read the following recommendations before using your Camden. Following these you will be able to enjoy the product for many years. _ Do not expose the headset to liquid, moisture or humidity to avoid the product’s internal circuit being affected. _ Do not use abrasive cleaning solvents to clean the headset.
Camden User Guide V7 6. FAQ Why does the red LED flash? The headset battery is in low power status, it needs to be recharged. Why is the red LED not on while charging? 1. When you didn’t use the headset for a long time, the battery might be drained. In this case, you have to charge the battery for 30 minutes, and then the red LED will be on. 2. Charging via PC or laptop might be interrupted due to standby mode of the PC/laptop.
Camden User Guide V7 7. TECHNICAL S PECIFICATIONS Bluetooth specification Bluetooth 4.0 + aptX® Bluetooth profiles HSP v1.2, HFP v1.6, A2DP v1.4 and AVRCP v1.2 Operating distance 10 meters, Class II Battery Built-in, rechargeable li-Ion-battery Working times times Music: Up to 24h Talk: Up to 12h Standby time Up to 400h Charging input voltage DC +5.0±0.25 V Charging time Approx. 2.h Dimensions 185 × 154 × 75 mm Weight Approx. 169g 8.
Camden User Guide V7 Password or PIN is the code required to pair a Bluetooth device (e.g. a mobile phone) with your headset. Standby is the mode where your headset is turned on, paired and ready for outgoing or incoming calls. When a call is ended, the headset automatically returns to standby mode. Copyright 2013 novero. All rights reserved.
Camden User Guide V7 9. APPENDIX 9.1 Disposal Dispose of all product parts in accordance with local regulations. If in doubt, please consult your local authorities. The battery of the headset needs to be recycled. Do not attempt to replace the built-in battery in your headset. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste.
Camden User Guide V7 9.3 Certification Certific ation and safety safety approvals European Union - Declaration of conformity conformity Hereby, novero declares that this NBHS-9 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.novero.com/declaration_of_conformity. FCC This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: 1.
Camden User Guide V7 criteria for being considered a personal area network, since it utilizes Bluetooth technology and can be used to communicate between devices. Additional notes The availability of particular products may vary by region. Please check with your novero dealer nearest you. Unauthorized changes or modifications to this device may void the user’s authority to operate the equipment.
