ETC(Other) settings In SETUP Menu, if selecting ETC icon, sub items are listed up like below picture. • Slideshow Interval : To control time delay for displaying next picture file during slideshow. Ö 3sec, 5sec, 10sec ~ 60sec (total 9 levels) • OSD Lang. : To change OSD languages. • Sub. Color : To change subtitle color when playing back a moving picture. Ö total nine(9) kinds available. • Sub. Size : To change size of subtitle when playing back a moving picture.
NETWORK setting The sub option related to network will be displayed by selection of NETWORK icon. • Network Connection : Select either “Wired Net.” (for the Ethernet connection) or “Wireless Net.” depending on the type of network connection you want to set up. • Connection Status : It shows current network connection status. • Address Setup: Ö DHCP(Auto IP) : IP address will be assigned automatically with using a router.
WIRELESS(Auto setting) This section shows how to make wireless network setup automatically to communicate with devices under network environment. You don’t need to change any setting value manually. AP SEARCH Click “AP SEARCH” to look for AP available. List of AP available You can select the AP that you want to use and press “OK” button. In case that you set ESSID as ‘hidden’ or you set ‘Password’ for your AP.
Check “ESSSID” You can make sure whether the setting value(ESSID, Channel, etc) is right or not. The setting values should be match with your wireless router(or AP) or PC. Then, you may press “RETURN” button to store this setting and exit. Getting IP address This device will try to get new IP address from your router. It takes about 30 ~ 60 seconds. With Ad-hoc mode If you are using Ad-hoc mode, you have to enter IP address manually on “NETWOKR” section.
WIRELESS (Manual setting) This section shows how to make wireless network setup manually to communicate with devices under network environment. z Before setting this section, check that Connection should be set Wireless net. on NETWORK section. z If you are running wireless network, all device on your network need to share the same ESSID, CHANNEL, Wireless security and Encryption key in order for them to communicate each other.
Wireless Security (Authentication Method) You can set different authentication methods which determine different encryption schemes. There are 6 authentication methods (WEP Auto, WEP SHARED, WEP OPEN, WPAPSK, WPANONE, WPA2PSK). Encryption algorithm (WEP or WPA) The encryption algorithm determines the authentication method you select. Relation.
Encryption(WPA ,Pre-Shared Key) Encryption (WPA) option should be applied in case that “TKIP” or “AES” encryption algorithm is used. The encryption key of this device should be exactly same as that of the wireless router or AP(access point) that you use under network environment. MAC (wireless) It shows MAC address of wireless LAN Review of wording related to Wireless, Security. Each manufacturer may use different wording when naming each function. Make your reference for below wordings.
WIRELESS (AD-HOC Setup) There are several ways to set AD-HOC mode, but the following way is the easiest way to set AD-HOC setup. Please see the following procedure. NETWORK setting of this device Go to NETWORK in SETUP menu and enter the following lists. A Î Wireless Net. B ÎStatic IP C Î200.200.0.2 (IP Address) D Î255.255.255.0(Subnet Mask) E Î200.200.0.1 WIRELESS setting of this device Go to WIRELESS in SETUP menu and enter the following lists. A Î AD HOC. B Î Enter ESSID(ex. abc) C Î Select Channel (ex.
Set IP and Subnet mask with a PC On the PC, select Network connection in the control panel. Open Properties for the network connection that is connected to this device. Select Properties for the Internet protocol (TCP/IP). Select “Use the following address” Enter the IP address below. IP address : 200.200.0.1 Subnet mask : 255.255.255.0 Click “OK” Zero Configuration utility-a Open wireless zero configuration utility and choose a wireless network with same ESSID (ex.abc) that you entered with this device.
LAN Sharing setting(PC) With shared folder, you can easily get multimedia file like movie, music and photo as if these files are in HDD of this device. To use shared folder, you must proceed the following steps.(based on window XP) NOTE. If firewalls are set in your PC, it may cause problem for this device to communicate with your PC. So, you need to disable the firewall program in your PC. 1. Click right button of mouse on the folder that you want to share and select “Sharing and Security...”. 2.
3. Then, each shared name will be listed up on screen if this device is connected.
STEP 3 Click the “ Users” folder STEP 4 Click the right button on “Guest” and click “Properties” STEP 5 Release the check box on “Account is disabled” and Apply this setting - 41 -
STEP 6 Check that “Guest” will be activated.
STEP 9 Click the “Add…” STEP 10 Click the “Add” after selecting “Guest” and Click “OK” STEP 11 Check the added “Guest” and apply this setting.
STEP 12 Go to security tab and click the “Add…” STEP 13 Click the “Add” after selecting “Guest” and Click “OK” STEP 14 Check the added “Guest” and apply this setting.
IP Address Setup :Ethernet Network using a direct connection Without a router or HUB, you can connect to a PC directly with crossed cable. If your PC has only one LAN card and it is already occupied for internet connection, you need one more LAN card for the connection if you use both simultaneously. Please see the below guides step by step to set IP address. 1. Select Network Connection in the Control Panel.
3. Select “Use the following IP address” Enter the IP address below. IP address 192.168.0.1 Subnet mask 255.255.255.0 5. Then, start this device, press “SETUP” button on your remote controller and go to “NETWORK” section. Select “Ethernet” on “Network Connection” and “Static IP” on “Address Setup” Then input the following address. IP Address 192.168.0.2 Netmask 255.255.255.0 Default gateway 192.168.0.1 Press “SETUP” on your remote to exit this menu. Check that NETWORK icon is highlighted on main screen.
MULTIMEDIA FILE PLAYBACK This section explains about basic operation for Multimedia file playback. How to use JUKE BOX CREATOR(BGM) 1. Go to JUKE BOX CREATOR Click the “JUKEBOX” on screen or press “JUKEBOX” button of remote controller. Then, “JUKEBOX CREATOR” screen will be displayed.. JUKEBOX + “OK” 2. Make ‘PLAYLIST’ Select music file and press “OK” button. Then, each selected file will be stored into ‘PLAYLIST’. Not selected music icon Selected music icon 3. Playback files stored in ‘PLAYLIST’.
4. Reference JUKEBOX function can be used when you do other jobs like Photo Slideshow or Onscreen jobs. Enjoying movie file 1. Loading Message Press “PLAY ▶∥” or “OK” button to start movie file. When loading a file, this message comes out. Depends on supported file format and size, loading time is different 2. Fast searching In playing a movie file, you can search the position that you want to see by pressing “REW, FF” button. It supports up to 32X searching.
3. Previous/Next file Playback Pressing “−PAGE+” button, previous or next movie file will be played. After pressing “-PAGE+ “button, Select YES or NO by pressing “◀”, “▶”button and press “OK” button. 4. GOTO function In playing DVD, if you pressing “GOTO” button, you can go to the specific position that you want. After pressing “GOTO” button, input the time and press “OK” button XX : YY : ZZ (H) : (M) : (S) 5. Control Volume level In playing movie file, press “-VOLUME+” button.
6. MUTE For sound off, press “MUTE” button. To clear this function, press “MUTE” button once again. 7. Checking information of playing file In playing movie file, press “INFO” button. The playing file information will be shown.. “INFO” 1st press 8. Checking current playing time. To check current playing time, press “INFO” button two times. To clear this, press “INFO” button once again.
9. Controlling subtitle position and size In playing movie file, you can control subtitle size and position with S.TITLE button. 1st ~5th press 10. Multi Subtitle control If the playing movie contains multi subtitle, you can select a subtitle that you want to see by pressing “S.TITLE” button. To select subtitle, press “OK” button 2nd ~ 3rd press 11. Multi Audio control If the movie file contains multi audio, you can select an audio that you want by pressing “AUDIO” button.
12. Enlarging the screen To enlarge screen size, press “ZOOM/SCROLL” button and control the screen size by pressing directional button(▲▼◀▶). 1st press 13. Scrolling the enlarged screen To move enlarged screen, press “ZOOM/SCROLL” button once again and move the enlarged screen by pressing directional button(▲▼◀▶). 2nd press 14. Screen Color control To adjust color setting, press “PICTURE” Button and control Brightness, Saturation and Contrast by pressing directional button(◀▶).
15. Memorizing a specific position In playing movie file, the current playing position is saved by pressing “BOOKMARK” button. 16. BOOKMARK list Pressing “BOOKMARK” button again, the latest Bookmarked List is shown.(Max. 5 lists) BOOKMARK + ▲ or ▼ + OK 17. Playback with slow speed This device supports ‘slow playing back’ function up to 1/32X.
18. Control subtitle sync If a movie and a subtitle do not match, you can control a subtitle showing time by pressing “SYNC” button. SYNC + ◀ or ▶ 1st press 19. Section Repeat – Set the beginning point Press “A-B” button once to select the beginning “A-“ point. 1st press 20. Section Repeat – Set the ending point Press “A-B” button again to select the Ending “-B” point. A-B section will be repeated. To clear this setting, press “A-B” button once again.
Creating DVD Library and Enjoying it You can create your own virtual DVD Library by storing your private collection of DVDs 1. How to play. As this device supports IFO and ISO file, you can create your own DVD library by storing your private collections of DVD in it * IFO : Information file commonly found on DVDs. Such files contain navigational information.. * ISO : One image file backup of the DVD title. * FAT32 file system only supports up to 4GB. * NTFS file system is unlimited. 2.
4. Multi Dubbing Audio Selection In playing DVD, you can select a dubbing audio that you want by pressing “AUDIO” button. 5. Return to DVD menu Screen In playing a DVD, you can go to DVD menu screen by pressing “TITLE” button. When you play DVD again after setting, it starts from stopped position of DVD. 6. GOTO function In playing a movie, you can go to the specific position that you want by pressing “GOTO” button.
Enjoying Music Library This device supports mp3, WMA, OGG, M3U and PLS files. 1. How to play Select a files in a folder that contains music files and push “PLAY ▶∥” button . 2. How to change Music Play Mode In playing a music file, you can change play mode by pressing “REPEAT/SHUFFLE” button. 1st press : Single 2nd press : Folder 3rd press : Shuffle 3. M3U and PLS file support This device supports M3U playlist and PLS playlist by created WINAMP.
Enjoying Photo Library This device supports JPG, BMP and PNG files. 1. How to play. Select a files in a folder that contains photo files and push “PLAY ▶∥” button. Basically, all photo files in same folder are played slideshow with 10 seconds interval. You can change slideshow time delay setting on “ETC” section of SETUP Menu. If you want to see one photo file only, please push “OK” button instead of “PLAY ▶∥”. 2.
External USB devices connection Various external USB devices can be attached to USB HOST ports of this device. 1. Connecting various external USB devices With USB host function, this device supports external USB devices like hard drives, memory sticks and USB card readers up to two devices one time. 2. USB connection usage. Once you have connected your device properly, you can access the files in the USB device by pressing the highlighted USB icon.
Firmware update This section explains how to update firmware. Getting the latest firmware to enjoy the added features and improved function. 1. Firstly, visit the designated website(Please ask the shop where you bought this device). You can download the newest firmware and save it on your PC. 2. Please extract the compressed firmware file and move or copy the file into this device through USB cable.
HDD Partition and Formatting This section explains how to make partition and format the HDD installed in this device. Under Window 98SE/ME environment Single partition is recommended. Even if this device supports multi partitions, we recommend single partition for your convenient using. 1. Open command prompt program(Start-Î Program Î MS-DOS Prompt) 2. Type “fdisk” and click enter. Select “Y” to enable large disk support.
3. Click “5” to change current fixed disk drive. 4. Select the last Disk number that you want to initialize. In case of more than 2 HDDs In case that there are several hard disk drives in your PC, the disk number may be changed. In this case, you can select the number corresponding to each percent(“%”).
5. Select “1. Create DOS partition or Logical DOS Drive . 6. Select “1. Create Primary DOS Partition”. 7. Wait to be finished verifying drive integrity until 100%.
8. Select “Y” and Enter to use the maximum available size for a Primary DOS Partition. 9. Wait to be finished verifying drive integrity once again and click “ESC” two times to finish MS-DOS prompt program. 10. Reboot your PC. 11. After restart, the new hard disk drive will be shown on My Computer. Click the right button of your mouse and select “Format” to be formatted.
Under Windows 2000/XP environment 1. Click the Start and go to Control panel. Then, select “Performance & Maintenance” 2. Select “Computer Management” and go to “Disk Management”. 3. Click the next on “The initialize and Covert Disk Wizard” window.
4. Select disk to initialize and click the next. 5. Click the Finish on “ Completing the initialized and convert Disk Wizard” window. 6. Click the right button on your mouse and select the “New Partition…”.
7. Click the next. 8. Select “Primary partition” and Click the next. Important This device work properly with TV in case of Primary partition type only. 9. Specify partition size and click the next.
10. Click the next. (Drive letter will be assigned automatically) 11. Select file system and click the next. (FAT32 can not be selected over 32GB HDD). Important Do not check “Enable file and folder compression. 12. Click the finish to close “The New Partition Wizard”. 13. After setup the New Partition Wizard, the new HDD will be formatted automatically. Please wait until 100% formatting is completed.
Troubleshooting Before contacting Customer Service Center, please check below points first. Problems related to TV screen 1. In case of no-display on the TV screen. z Check if TV Out mode is set properly with your TV or Monitor. You may use TV OUT button of remote controller. Press this button several times with 2~3sec time interval. z Check whether you set your TV as Video input or Component input. z Check if A/V cable or Component cable is connected properly and firmly.
Problems related to Sound 1. In case of no-sound or much noise z Check whether stereo cable (A/V cable) is connected properly and tightly between this device and TV set. z Check if [MUTE] button is pressed and volume level is set properly z Check whether digital audio cable is connected properly and tightly to the audio input connectors of Home Theater System or Audio Amplifier z Try changing the value(Down mix or pass through) of Audio Out on SET-UP menu z Try changing audio cable with new one.
Problems related to HDD or Remote Controller 1. In case that this player does not recognize HDD z Check whether the root folder or specific folder contains too many files. In this case, make sub folders and move some files to the sub folders to reduce files number in specific folder.
Problem related to NETWORK z As the network is not set up correctly. Try setting up again according to “Setting up NETWORK(Page 31) z Check cable connection status. Cables should be connected to each port of the Router or switch HUB properly. z This device and PC are not on the same NET MASK( Subnet) z Wrong IP address input, check the IP address and subnet mask The NETWORK icon is activated, but can not read the Shared DATA. In this case, check whether firewall is set in PC.
SPECIFICATION High Definition Multimedia Player File Playback Format Video MPEG1/2/4, XviD, DivX, WMV9, WMV9HD, H.264, HD File(.tp, .trp, .ts), .MKV, .WMV, AVI, .ISO, .IFO, .VOB, .MPG, .ASF, .DAT Audio MP3, WMV, WMA, Ogg Vorbis, AC3, PCM, DTS Picture JPEG, BMP, PNG, GIF Subtitle SMI, .SUB, .SRT Display 2inch TFT-LCD Output Connection Video HDMI, Component, Composite, S-Video Audio Digital : Optical & Coaxial, Anaglog :Stereo e-STAT YES Interface USB 1xUSB 2.0 Target Port, 2xUSB 2.
