CONTENTS 1 2 3 Introduction ············································································· 4 Multimedia Functions····················································································· 4 Input/Output Functions··················································································· 5 Kinds of format to be supported····································································· 6 TV Out set-up and change··················································
SETUP Menu and How to set up···································································· 28 VIDEO setting change················································································ 29 AUDIO setting change················································································ 30 ETC(Other) settings······················································································ 31 NETWORK setting········································································
Introduction Multimedia Functions To playback a recorded digital HD file As this device supports up to 1920 x 1080 progressive scan, you can enjoy playing back a pre-recorded HDTV program by a digital TV set-top box or person digital video contents taken by a HD camcorder with fantastic displaying quality. To support various video formats This device supports various latest video formats such as a pre-recorded HD file(tp, ts), WMV9, WMV9 HD, MPEG1/2, MPG, MPEG4(DivX, Xvid), etc.
Input/Output Functions Analog 5.1CH Audio Output and 2CH Down Mix This player can output analog audio signal(decoded signal), as it can decode digital signal(high quality audio sound signal like AC3, DTS) into analog signal internally by itself. So, you can enjoy 5.1CH high quality sound without an expansive additional device like DTS decoder or Receiver. And, as this device supports 2CH down mix, users who have 2CH speaker only also can enjoy multi channel audio track..
Kinds of format to be supported Video MPEG1/2/4, XviD, DivX, WMV9, WMV9HD, H.264, HD File(.tp, .trp, .ts), .MKV, .WMV, AVI, .ISO, .IFO, .VOB, .MPG, .ASF, .DAT Subtitle SMI, .SUB, .SRT Audio MP3, WMV, WMA, Ogg Vorbis, AC3, PCM, DTS Picture JPEG, BMP, PNG, GIF Needed minimum transferring rate Format Wired, Wireless LAN USB2.O(HOST) MPEG1/2 12Mbps 10Mbps DivX, Xvid 1.5Mbps 1.
TV OUT set-up and change TV Standard for each country Korea, North America Europe and else NTSC PAL ※ TV out mode is originally set as PAL/Composite ※ If you want to change TV out mode, you can use TV OUT button of remote controller or TV OUT button of the front side of this device ※ LED light of the front side of this device moves to corresponding position when you press TV OUT button with 2~3sec time interval.
LCD-Display Information This section allows you to playback the music file without connecting this device to TV. Main Menu All the options of this screen may be chosen by pressing the function button of remote controller and please refer to “PART3 – Structure of Remote Controller” on the usage of remote controller. This option allows you to see the list of movie or picture file but playback the selected file.
Precautions Do not drop or give a shock. It may cause Do not block a ventilation opening serious damage to internal Hard Disk Drive. Do not touch the plug of the AC power cord with wet hands Keep it away from high temperature, high humidity, nearby magnetic filed and direct sunlight. Do not try disassembling. It may cause an electric shock, defect or unexpected problem. Keep it unplugged during lightning storms or For installing or changing HDD, you may open when unused for long period time.
How to handle and other precautions • Make sure that you have to use the AC adapter supplied together with this device. If not, it may cause unexpected problem like breakdown, fire, etc. • In case that this device is used or left in a completely covered and high temperature space(like in a car) for long time, it may cause unexpected problem. • Do not see the light of OPTICAL connector directly. It may have a bad effect on your eyes.
Name of each point – Top & Front Button of top side OK BUTTON SETUP Button STOP Button PLAY/PAUSE Direction, REW/FWD and +15/-15sec move Button (▲, ▼, ◀, ▶) Button & LED of front side Video / S-Video or Component(DVD) LED HDTV LED HDMI LED LCD LED 2” TFT-LCD Display TV OUT Button Power(On/Off) Button IR receiver 11
Name of each point – Rear Side External IR receiver Connector For Wireless Antenna USB connector for PC S-Video DC FAN HDMI Out connector Digital Sound Optical Connector Digital Sound Coaxial Connector Composite Video Connector 2CH Stereo or 5.
Contents in package Below items are in the package of this product □ Unit □ User’s Manual □ A to B USB Cable □ Remote Controller □ AAA size Batteries □ 12V DC Power Adaptor □ Poewr Cord □ Composite AV Cable □ 5dBi Wireless Antenna (Wireless Model Only) 13 □ Component Video
Accessories available at shops If below accessories is needed, you can buy them at shops by yourself.
Preparation for Usage To introduce preparation before you enjoy this device. Procedure 1. Check whether all accessories are supplied properly. 2. Install HDD(Hard Disk Drive) into this device according to the procedure of HDD installation(※ note : HDD jumper should be set as Master) 3. Connect AC adapter into this device, and connect it with PC through USB cable 4. Power on this device (with power button of top side, or with power button of remote controller) 5.
HDD Installation 1. Push the locker to the direction(“OPENÎ). 2. There is HDD fixture inside. Push it Open up the HDD door slowly. forward(#1) slightly and pull it up(#2). 3. . Insert HDD carefully inside this device 4. Fix HDD with HDD fixture like below picture. laid down slightly to minimize impact to HDD. 6 Close HDD door and push the locker to the 5. Connect SATA cable and power cable direction(“ÍCLOSE”). like picture.
Connecting with PC To copy files in your PC to this device, follow below procedure. For Windows ME/ 2000/XP/Vista Users 1. Power on your PC system. 2. Connect this device to your PC with USB Cable. Connect AC adapter to this device. And power it on. 3. Wait until your PC recognizes this device as USB mass storage. 4. Check whether this device is properly recognized as USB mass storage by clicking and opening “My Computer” on Windows. For Windows 98SE Users 1.
To create folder and to copy files Follow below procedure to copy folder and file from PC to this device. • If the HDD has no partition or the HDD is not formatted, you need to do it first. - We recommend NTFS instead of FAT32. this device supports multi partitions. - Note : Primary partition should be over one(1) ※ For HDD partition, refer to Chapter 6. • When you make folder in the HDD of this device, it is recommended that you make folders like ‘MOVIE’, ‘MUSIC’, ‘PHOTO’.
Disconnecting from PC When try disconnecting USB cable between this device and PC, make sure to follow below procedure. 1. Do double-click the icon of “Safely remove USB……”. 2. Click “Stop” button after selecting “USB Mass Storage Device”.. 3. When the message like picture is shown, disconnect USB cable between this device and PC.
Connecting to TV with Composite(AV) cable After power off this device and TV, connect them like below procedure.. • The Composite AV cable is needed to connect with normal TV or Video and is for connecting Composite video signal and 2CH audio signal simultaneously. • Connect yellow cable to the Composite connector of this device and to the VIDEO connector of TV set. • Connect red cable to the FRONT-R connector of this device and to the Sound Input(Right) of TV or Audio system.
Connecting with Component cable or HDMI connector When connecting HDTV or other high quality displaying devices, connect like below picture.. Connecting with Component cable Connecting with HDMI cable • For safety, connect cables after power off this device, TV and audio system.
Connecting with 5.1CH audio system If you want to connect analog 5.1Ch sound output to your speaker, please connect audio cables like below picture. • You need to prepare below cables or gender by yourself as those are not supplied together with this device. (audio cable for analog 5.1Ch, 3.5 pie gender cable, etc) • Connect with analog 5.1Ch cables like upper picture. • If the input connector of speaker or audio system is the stereo jack(3.5 pie) type, you need 3.5 pie gender cable.
Connecting with Optical, Coaxial connector If you want to enjoy high quality digital audio, connect with Optical or Coaxial connector. • As the audio output through Optical or Coaxial is digital signal, separate devices like DTS Decoder(or Receiver) is needed additionally. • For safety, connect cables after power off this device and audio system. • You have to purchase Optical cable or Coaxial cable by yourselves from shop. • Make sure that Optical cable is not bent severely.
Connecting to Network To connect this device to a network, some equipment is required. Ethernet Network using a direct connection to a PC(IP Address setup : 31 page) Connect this device to a PC with a crossed cable. ◈ Equipment required. • A crossed cable. • A window PC with an Ethernet connection. Ethernet Network using a router Connect this device and a PC to a router or switch HUB with 2 straight cables. ◈ Equipment required. • 2 straight cables.
Remote Controller & SET-UP Menu To introduce remote controller structure and set-up.
Booting Message & Main Menu If this device is powered on, it is booted up like below picture. 1. Booting Message This picture is displayed during booting-up. In case of no –display. TV Out mode is originally set as PAL/Composite. If no-display on TV screen after booting up, try changing TV Out mode by pressing TV OUT button of remote controller or on the front side of this device with 2~3seconds time interval. 2.
Review of each icon on Main Menu Main Menu has several icons like below. If you select each icon, you can see files stored in corresponding folder or storage. MOVIE icon If selecting MOVIE icon, it shows all contents in MOVIE folder of the basic HDD. It will be convenient for you to use or manage files if you make “MOVIE” folder in the root directory of HDD in advance. MUSIC icon If selecting MUSIC icon, it shows all contents in MUSIC folder of the basic HDD.
SETUP Menu and How to set up If needed to change setting values before using this device, you can open SETUP Menu like below picture by pressing SETUP button of remote controller. • SETUP Menu is classified like VIDEO, AUDIO, ETC, NETWORK, WIRELESS, EXIT. You can select each item with Left/Right (◀, ▶) button of remote controller or this device. • To change setting values, if selecting main item, sub items are listed up. You can select each item with Up/Down(▼, ▲) button.
VIDEO Setting Change In SETUP Menu, if selecting VIDEO icon, sub items related to video are listed up like picture. • TV Standard Ö NTSC :Korea, North America Ö PAL : Europe and else • TV Type Ö 4:3 (for normal TV) Ö16:9(for Wide TV such as HDTV or Plasma TV • Display Ö Original(Letter Box) : Select this option in case of playing a wide movie(16:9) with an ordinary 4:3 TV. There will be margins on the upper and lower sides of the screen.