Federal Communication Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communication Commission(FCC) rules.
CONTENTS 1 2 3 Introduction ·························································· 4 Multimedia Functions······························································ 4 Input/Output Functions···························································· 5 Kinds of format to be supported·················································· 6 TV Out set-up and change······················································· 7 Precautions·······························································
VIDEO setting change····························································· 28 AUDIO setting change····························································· 29 ETC(Other) settings································································ 30 NETWORK setting································································· 31 WIRELESS (Auto setting)························································ 32 WIRELESS (Manual setting) ····················································
Introduction To introduce features and functions of NTD36HD. Multimedia Functions To playback a recorded digital HD file As NTD36HD supports up to 1920 x 1080 progressive scan, you can enjoy playing back a pre-recorded HDTV program by a digital TV set-top box or person digital video contents taken by a HD camcorder with fantastic displaying quality.
Input/Output Functions Analog 5.1CH Audio Output and 2CH Down Mix NTD36HD can output analog audio signal(decoded signal), as it can decode digital signal(high quality audio sound signal like AC3, DTS) into analog signal internally by itself. So, you can enjoy 5.1CH high quality sound without an expansive additional device like DTS decoder or Receiver. And, as NTD36HD supports 2CH down mix, users who have 2CH speaker only also can enjoy multi channel audio track..
Kinds of format to be supported Video HD file format(tp,ts), Windows Media 9, Windows Media 9 HD DivX3.11, DivX4, DivX5, DivX HD, Xvid, MPEG1, MPEG2(IFO, VOB, ISO) Subtitle SMI, SUB, SRT Audio MP3, Ogg Vorbis, WMA, AC3, DTS Picture JPG, JPEG, BMP, PNG Needed minimum transferring rate Format Wired, Wireless LAN USB2.O(HOST) MPEG1/2 12Mbps 10Mbps DivX, Xvid 1.5Mbps 1.
TV OUT set-up and change TV Standard for each country Korea, North America Europe and else NTSC PAL ※ TV out mode is originally set as PAL/Composite ※ If you want to change TV out mode, you can use TV OUT button of remote controller or TV OUT button of the front side of NTD36HD set. ※ LED light of the front side of NTD36HD moves to corresponding position when you press TV OUT button with 2~3sec time interval.
Precautions Do not drop or give a shock. It may cause Do not block a ventilation opening serious damage to internal Hard Disk Drive. Keep it away from high temperature, high Do not touch the plug of the AC power cord with wet hands humidity, nearby magnetic filed and direct sunlight. Do not try disassembling. It may cause an electric shock, defect or unexpected problem. Keep it unplugged during lightning storms or For installing or changing HDD, you may open when unused for long period time.
How to handle and other precautions • Make sure that you have to use the AC adapter supplied together with NTD36HD. If not, it may cause unexpected problem like breakdown, fire, etc. • In case that NTD36HD is used or left in a completely covered and high temperature space(like in a car) for long time, it may cause unexpected problem. • Do not see the light of OPTICAL connector directly. It may have a bad effect on your eyes.
Name of each point – Top & Front Button of top side Power(On/Off) Button SETUP Button OK BUTTON STOP Button PLAY/PAUSE BUTTON Direction, REW/FWD and +15/-15sec move Button (▲, ▼, ◀, ▶) Button & LED of front side IR receiver TV OUT Button Video / S-Video or Component(DVD) LED DTV Component LED DVI-D LED DVI-A LED AUDIO OUT Button 2CH Stereo Audio out LED Analog 5.
Name of each point – Rear Side External IR receiver Connector For Wireless Antenna USB connector for PC S-Video DC FAN Digital Sound Optical Connector DVI Out connector Digital Sound Coaxial Connector Composite Video Connector 2CH Stereo or 5.
Contents in package Below items are in the package of NTD36HD □ NTD36HD User’s Manual □ A to B USB Cable □ Remote Controller □ AAA size Batteries □ 12V DC Power Adaptor □ Power cord □ Composite A/V Cable □ Component Video Cable □ 5dBi Wireless Antenna (Wireless model only) 12
Accessories available at shops If below accessories needed, you can buy them at shops by yourself.
Preparation to use NTD36HD To introduce preparation before you enjoy NTD36HD. Procedure 1. Check whether all accessories are supplied properly. 2. Install HDD(Hard Disk Drive) into NTD36HD according to the procedure of HDD installation(※ note : HDD jumper should be set as Master) 3. Connect AC adapter into NTD36HD, and connect NTD36HD with PC through USB cable 4. Power on NTD36HD(with power button of top side, or with power button of remote controller) 5.
HDD Installation 1. Push the locker to the direction(“OPEN ). 2. There is HDD fixture inside. Push it forward(#1) slightly and pull it up(#2). Open up the HDD door slowly. 4. Fix HDD with HDD fixture like below picture. 3. . Insert HDD carefully inside with NTD36HD laid down slightly to minimize impact to HDD. 5. Connect IDE cable and power cable 6 Close HDD door and push the locker to the direction(“ like picture. POWER IDE 15 CLOSE”).
Connecting with PC To copy files in your PC to NTD36HD, follow below procedure. For Windows ME/ 2000/XP Users 1. Power on your PC system. 2. Connect NTD36HD to your PC with USB Cable. Connect AC adapter to NTD36HD. And power it on. 3. Wait until your PC recognizes NTD36HD as USB mass storage. 4. Check whether NTD36HD is properly recognized as USB mass storage by clicking and opening “My Computer” on Windows. For Windows 98SE Users 1.
To create folder and to copy files Follow below procedure to copy folder and file from PC to NTD36HD. • If the HDD has no partition or the HDD is not formatted, you need to do it first. - We recommend NTFS instead of FAT32. NTD36HD supports multi partitions. - Note : Primary partition should be over one(1) ※ For HDD partition, refer to Chapter 6. • When you make folder in the HDD of NTD36HD, it is recommended that you make folders like ‘MOVIE’, ‘MUSIC’, ‘PHOTO’.
Disconnecting from PC When try disconnecting USB cable between NTD36HD and PC, Make sure to follow below procedure. 1. Do double-click the icon of “Safely remove USB……”. 2. Click “Stop” button after selecting “USB Mass Storage Device”.. 3. When the message like picture is shown, disconnect USB cable between NTD36HD and PC.
Connecting to TV with Composite(AV) cable After power off NTD36HD and TV, connect them like below procedure.. • The Composite AV cable is needed to connect with normal TV or Video and is for connecting Composite video signal and 2CH audio signal simultaneously. • Connect yellow cable to the Composite connector of NTD36HD and to the VIDEO connector of TV set. • Connect red cable to the FRONT-R connector of NTD36HD and to the Sound Input(Right) of TV or Audio system.
Connecting with Component cable or DVI connector When connecting HDTV or other high quality displaying devices, connect like below picture.. Connecting with Component cable Connecting with DVI cable • For safety, connect cables after power off NTD36HD, TV and audio system.
Connecting with 5.1CH audio system If you want to connect analog 5.1Ch sound output to your speaker, please connect audio cables like below picture. • You need to prepare below cables or gender by yourself as those are not supplied together with NTD36HD. (audio cable for analog 5.1Ch, 3.5 pie gender cable, etc) • Connect with analog 5.1Ch cables like upper picture. • If the input connector of speaker or audio system is the stereo jack(3.5 pie) type, you need 3.5 pie gender cable.
Connecting with Optical, Coaxial connector If you want to enjoy high quality digital audio, connect with Optical or Coaxial connector. • As the audio output through Optical or Coaxial is digital signal, separate devices like DTS Decoder(or Receiver) is needed additionally. • For safety, connect cables after power off NTD36HD and audio system. • You have to purchase Optical cable or Coaxial cable by yourselves from shop. • Make sure that Optical cable is not bent severely.
Connecting to Network To connect NTD36HD to a network, some equipment is required. Ethernet Network using a direct connection to a PC(IP Address setup : 36 page) Connect the NTD36HD to a PC with a crossed cable. ◈ Equipment required. • A crossed cable. • A window PC with an Ethernet connection. Ethernet Network using a router Connect the NTD36HD and a PC to a router or switch HUB with 2 straight cables. ◈ Equipment required. • 2 straight cables.
Remote Controller & SET-UP Menu To introduce remote controller structure and set-up.
Booting Message & Main Menu If power on NTD36HD, it is booted up like below picture. 1. Booting Message This picture is displayed during bootingup. In case of no –display. TV Out mode is originally set as PAL/Composite. If no-display on TV screen after booting up, try changing TV Out mode by pressing TV OUT button of remote controller or on the front side of NTD36HD set with 2~3seconds time interval. 2. Screen of Main Menu Main Menu screen is displayed like below picture after completing booting up.
Review of each icon on Main Menu Main Menu has several icons like below. If you select each icon, you can see files stored in corresponding folder or storage. MOVIE icon If selecting MOVIE icon, it shows all contents in MOVIE folder of the basic HDD. It will be convenient for you to use or manage files if you make “MOVIE” folder in the root directory of HDD in advance. MUSIC icon If selecting MUSIC icon, it shows all contents in MUSIC folder of the basic HDD.
SETUP Menu and How to set up If needed to change setting values before using NTD36HD, you can open SETUP Menu like below picture by pressing SETUP button of remote controller or NTD36HD set. • SETUP Menu is classified like VIDEO, AUDIO, ETC, NETWORK, WIRELESS, EXIT. You can select each item with Left/Right (◀, ▶) button of remote controller or NTD36HD set. • To change setting values, if selecting main item, sub items are listed up. You can select each item with Up/Down(▼, ▲) button.
VIDEO Setting Change In SETUP Menu, if selecting VIDEO icon, sub items related to video are listed up like picture. • TV Standard NTSC :Korea, North America PAL : Europe and else • TV Type 4:3 (for normal TV) 16:9(for Wide TV such as HDTV or Plasma TV • Display Original(Letter Box) : Select this option in case of playing a wide movie(16:9) with an ordinary 4:3 TV. There will be margins on the upper and lower sides of the screen.
AUDIO setting change In SETUP Menu, if selecting AUDIO icon, sub items related to audio are displayed like picture.. • SPDIF Down mix : If selecting this option, all kind of digital audio(PCM, MP3, AC3, DTS) are decoded into analog signal. So, you can hear sound without any separate DTS Decoder(or Receiver). Pass through : If selecting this option, digital signal is outputted directly without decoding process.
ETC(Other) settings In SETUP Menu, if selecting ETC icon, sub items are listed up like below picture. • Slideshow Interval : To control time delay for displaying next picture file during slideshow. 3sec, 5sec, 10sec ~ 60sec (total 9 levels) • OSD Lang. : To change OSD languages. • Sub. Color : To change subtitle color when playing back a moving picture. total nine(9) kinds available. • Sub. Size : To change size of subtitle when playing back a moving picture. total two(2) kinds(Large/Small) available.
NETWORK setting The sub option related to network will be displayed by selection of NETWORK icon. • Network Connection : Select either “Wired Net.” (for the Ethernet connection) or “Wireless Net.” depending on the type of network connection you want to set up. • Connection Status : It shows current network connection status. • Address Setup: DHCP(Auto IP) : IP address will be assigned automatically with using a router.
WIRELESS(Auto setting) This section shows how to make wireless network setup automatically to communicate with devices under network environment. You don’t need to change any setting value manually. AP SEARCH Click “AP SEARCH” to look for AP available. List of AP available You can select the AP that you want to use and press “OK” button. In case that you set ESSID as ‘hidden’ or you set ‘Password’ for your AP.
Check “ESSSID” You can make sure whether the setting value(ESSID, Channel, etc) is right or not. The setting values should be match with your wireless router(or AP) or PC. Then, you may press “RETURN” button to store this setting and exit. Getting IP address The NTD36HD will try to get new IP address from your router. It takes about 30 ~ 60 seconds. With Adhoc mode If you are using Ad-hoc mode, you have to enter IP address manually on “NETWOKR” section.
WIRELESS (Manual setting) This section shows how to make wireless network setup manually to communicate with devices under network environment. Before setting this section, check that Connection should be set Wireless net. on NETWORK section. If you are running wireless network, all device on your network need to share the same ESSID, CHANNEL, Wireless security and Encryption key in order for them to communicate each other.
Wireless Security (Authentication Method) You can set different authentication methods which determine different encryption schemes. There are 6 authentication methods(WEP Auto, WEP SHARED, WEP OPEN, WPAPSK, WPANONE, WPA2PSK). Encryption algorithm (WEP or WPA) The encryption algorithm determines the authentication method you select. Relation.
Encryption(WPA ,Pre-Shared Key) Encryption(WPA) option should be applied in case that “TKIP” or “AES” encryption algorithm is used. The encryption key of NTD36HD should be exactly same as that of the wireless router or AP(access point) that you use under network environment. MAC (wireless) It shows MAC address of wireless LAN Review of wording related to Wireless, Security. Each manufacturer may use different wording when naming each function. Make your reference for below wordings.