AirSpeed 1000 Installation Guide Part Number: DUG01289 System Release: 16.
© Copyright by Airspan Networks Ltd., 2018-2019. All rights reserved worldwide. Legal Notices The information contained within this document is proprietary, privileged and intended only for the recipient. As such, the information is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreements protecting Airspan Networks Ltd. rights in the aforesaid information.
Table of Contents Document Information ............................................................................... 2 Abstract .................................................................................................................. 2 Revision History ..................................................................................................... 2 Warnings and Cautions ............................................................................. 3 Human Exposure to Radio Frequencies .....
AirSpeed 1000 Installation Guide Related Reading .................................................................................................. 11 Customer Care Help Desk ......................................................................12 Airspan Encourages Comments .......................................................................... 12 1 Introduction ..........................................................................................13 1.1 AirSpeed 1000 .............................
AirSpeed 1000 Installation Guide C Abbreviations .......................................................................................30 Figures Figure 1: AirSpeed 1000 .................................................................................................................... 9 Figure 2: AirSpeed 1000 Front View ................................................................................................ 13 Figure 3: Workflow...................................................................
AirSpeed 1000 Installation Guide Document Information Abstract This document details procedures for installing the Airspan’s AirSpeed 1000 Pico-class LTE eNodeB variant. Revision History Revision Details Date Summary of Changes Rev 0.1 – 0.
AirSpeed 1000 Installation Guide Warnings and Cautions Human Exposure to Radio Frequencies The AirSpeed 1000 should be installed and operated from a minimum safe distance of about 48Cm. Avertissement et Precautions d’Utilisation Exposition des personnes aux fréquences radioélectriques Les AirSpeed 1000 doivent être installée et utilisée de façon à garantir la distance minimale de sécurité de 2.5m.
AirSpeed 1000 Installation Guide nécessaire, disposant d’un agreement des autorités gouvernementales de régulation. Toute enfreinte a ces obligations peut annuler la garantie délivrée par Airspan pour ces produits et peut exposer l’utilisateur final ou le fournisseur de services a des dommages légaux et financiers. Airspan et ses revendeurs ou ses distributeurs ne sont pas responsables des blessures, dommages ou violations de la régulation en vigueur lies a l’installation du système ou des antennes.
AirSpeed 1000 Installation Guide 9. L’interrupteur de circuit électrique doit être facilement accessible afin de pouvoir déconnecter l’équipement. 10. Lors de l’installation de la configuration finale, le produit doit être conforme aux Standards de Sécurité en vigueur ainsi qu’aux exigences réglementaires du pays dans lequel il est installé. Si nécessaire, consulter les agences règlementaires appropriées, ainsi que les autorités chargées de l’inspection afin de garantir la conformité.
AirSpeed 1000 Installation Guide Warning Symbols The following symbols may be encountered during installation or troubleshooting. These warning symbols mean danger. Bodily injury may result if you are not aware of the safety hazards involved in working with electrical equipment and radio transmitters. Familiarize yourself with standard safety practices before continuing. Caution, hot surface Caution Electro-Magnetic Radiation DC Service Information Refer all repairs to qualified service personnel.
AirSpeed 1000 Installation Guide Greek: ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Airspan ΔΗΛΩΝΕΙ ΟΤΙ Ο ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français: Cet appareil est conforme aux exigencies essentialles et aux autres dispositions pertinantes de la Directive 1999/5/EC. Íslenska: Þessi búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipunar 1999/5/ESB.
AirSpeed 1000 Installation Guide Maximum Output TX Power Table 1: AirSpeed 1000 ETSI Maximum Output TX Power Frequency Band (MHz) TX (dBm) 3550-3700 ETSI EIRP (dBm) 25 Antenna Gain (dBi) Variant 20.5 1000 Antenna Gain (dBi) Variant 20.5 1000 45.5 Table 2: AirSpeed 1000 FCC Maximum Output TX Power Frequency Band (MHz) TX (dBm) 3550-3700 FCC EIRP (dBm) 23.98 44.48 Note: The AirSpeed 1000 requires operation using an Airspan FCC-specific version of Netspan acting as a CBRS Domain Proxy.
AirSpeed 1000 Installation Guide External Antennas AirSpeed 1000 connects to the external antennas via four (4) N-Type female connectors located at the top panel. The antenna should be mounted to its appropriate mounting facility. The supported antennas should be dual slant, cross polar antennas. Note: For a list of compatible external antennas, please contact your nearest Airspan Sales representative.
AirSpeed 1000 Installation Guide About This Document Purpose This guide provides the workflow and step-by-step procedures for installing the Airspan’s AirSpeed 1000, Pico-class LTE eNodeB variant. These procedures include: Verify prerequisites Install Mounting bracket Install the AirSpeed 1000 Connect and manage cables Intended Audience This guide is intended for persons who are responsible for installing the AirSpeed 1000 equipment.
AirSpeed 1000 Installation Guide Related Reading The following documents contain related information: AirSpeed 1000 Product Datasheet Airspan LTE Commissioning Manual DUG01289 Airspan Commercial and Internal Use 11
AirSpeed 1000 Installation Guide Customer Care Help Desk Airspan’s Customer Care Help Desk offers prompt and efficient customer support services. Note: To avail Airspan’s Customer Care Help Desk support, you must be a registered user and must have a valid support contract. To register, click here and fill the Registration form. To create and update issue logs, send e-mails to Customer Care Help Desk. Once you submit your issue, the system generates a new issue and sends an issue number for your reference.
AirSpeed 1000 Installation Guide 1 Introduction This section provides a descriptive overview of the Airspan’s AirSpeed 1000 Pico-class eNodeB variant and its place in the Airspan product suite. 1.1 AirSpeed 1000 AirSpeed 1000 is part of Airspan’s carrier-class LTE Advanced outdoor small cell eNodeB family. AirSpeed 1000 is a Pico-class LTE eNodeB product, providing high-speed data, mobility, Voice over LTE, and broadcast/multicast services.
AirSpeed 1000 Installation Guide 2 Getting Started 2.1 Workflow of Installation The Workflow to install the AirSpeed 1000 is displayed in the following diagram: Figure 3: Workflow 2.2 AirSpeed 1000 Installation Checklist Plan the installation of the AirSpeed 1000 by using the Installation Checklist, which you can find as a removable job aid in Appendix B for this guide.
AirSpeed 1000 Installation Guide 3 Verifying Prerequisites Prior to installing the AirSpeed 1000, verify the required safety, power, tools, parts and components. This chapter includes the hardware, software, and client requirements for installation. Important: Set up requirements for the installation is detailed in the Job Sheet, see Appendix A. 3.1 Verifying Site Requirements To set up the AirSpeed 1000, an IP connection to a Netspan server is required. 3.2 Verify Installation Requirements 3.2.
AirSpeed 1000 Installation Guide 3.2.2 Verify the Parts and Kits Note: Verify order and requirements to ensure the correct unit type is being installed. Table 7. Parts & Kits Installation Kit / Part Product Code Airspan No. Consisting of: AirSpeed 1000, 3.550-3.700 GHz (B48) AS10-U48B02D 998-73483 AirSpeed 1000 Copper Backhaul, DC Unit AirSpeed 1000 Acc.
AirSpeed 1000 Installation Guide 3.2.4 Connections The following diagrams display the connections on the top and bottom panels of the AirSpeed 1000. Note: The unit requires a secure ground connection and a grounding screw fitted with a flat washer and lock washer is provided on the back and clearly marked with the universal ground symbol. Figure 4: AirSpeed 1000 Top Ports Note: RF ports 1 & 2 are specified as Sector 1.
AirSpeed 1000 Installation Guide Figure 5: AirSpeed 1000 Bottom Ports Note: When the Serial port is not in use it should be sealed with a cap or plug to keep it secured. 3.2.5 Physical Dimensions AirSpeed 1000 is an outdoor enclosure. Table 8. AirSpeed 1000 Physical Dimensions Variant Dimensions (H x W x D) Comment AirSpeed 1000 220 x 220 x 150 mm / 9 x 9 x 6 in. The dimensions exclude connectors and protruding screws Weight Main Unit Mounting Bracket (Bracket Base) 4 Kg / 8.8 Lbs. 1 Kg. / 2.
AirSpeed 1000 Installation Guide Table 9.
AirSpeed 1000 Installation Guide 4 AirSpeed 1000 Installation AirSpeed 1000 offers two optional methods for outdoor mounting using the included mounting kit, either: Pole Mounting Wall mounting The AirSpeed 1000 Mounting Kit - includes a pole/wall mounting bracket for fastening the unit to a pole or on a wall. Prior to installation of the AirSpeed unit the mounting bracket must first be affixed in place on either the pole or a wall. Note: AirSpeed 1000 comes with the GPS pre-assembled.
AirSpeed 1000 Installation Guide The following describes the pole mounting procedure: 1. Select the location on the pole to mount the AirSpeed 1000 mounting bracket. Note: You can attach the unit to any pole from 1 inch to 8 inch (33.7 to 210 mm) in diameter. 2. Assemble the 2 SEMS screws (M8 x 20) into the lower threaded holes on the mounting (base) bracket, do not tighten. 3. Position the mounting bracket onto the pole at the required height using the provided U– bolts (for 1 in. / 33.7 mm to 1.5 in.
AirSpeed 1000 Installation Guide Figure 7: Pole Mounting Assembly Figure 8: Mounted on Pole DUG01289 Airspan Commercial and Internal Use 22
AirSpeed 1000 Installation Guide 4.3 Wall Mount Assembly The following describes the wall mounting procedure: 1. Select the location on the wall to mount the AirSpeed 1000 mounting bracket. 2. Assemble the 2 SEMS screws (M8 x 20) into the lower threaded holes on the mounting (base) bracket, do not tighten. 3. Position the mounting (base) bracket onto the wall at the required height using screws and appropriate wall anchors (not provided) and tighten in place.
AirSpeed 1000 Installation Guide 4.4 LED Display A single tri-color LED (Green/Red/Orange) appears at the bottom of the unit, providing unit status indication.
AirSpeed 1000 Installation Guide 5 Connect and Manage Cables This section describes grounding procedure, cable preparation and connections and external antenna assembly. 5.1 Grounding The AirSpeed 1000 requires a secure ground connection and a grounding screw fitted with a flat washer and lock washer is provided on the back and clearly marked with the universal ground symbol . The cable should be grounded and bonded according to international or local standards. 5.
AirSpeed 1000 Installation Guide 5.4 Ethernet Cable Installation Before connecting to the appropriate port you can manage and store any excess cable by winding it up and fasten it securely. This takes up any excess slack and presents a more thorough and orderly installation. The following demonstrates the recommended assembly instructions, hardware and tool requirements for the proper Ethernet cable assembly of the Ethernet Category 5e (enhanced) (CAT5e) cable used by Airspan products.
AirSpeed 1000 Installation Guide 3. Position the pins correctly, the connector is secured to the unit with a locking ring that is screwed into place. Use firm hand pressure only, the connector has a built in sealing ring. Caution: The internal plastic parts of the mating connector are keyed. Take care to align these by visual inspection or by gently rotating the connector body until the key way sections align and the pins go in before tightening the locking ring.
AirSpeed 1000 Installation Guide A Job Sheet This job sheet enables the users to keep track of their installation. It covers all the prerequisites required for accomplishing the AirSpeed 1000 installation.
AirSpeed 1000 Installation Guide B Checklist During installation, review and perform all the steps on this checklist (in the given order). This checklist is meant for the person who performs the AirSpeed 1000 installation. Tip: To make sure you complete all the tasks, detach or print this checklist and use it as a job aid. After performing, check off each task. Procedure Action Check If Performed Verify the site requirements. ☐ Verify the installation requirements. ☐ Verify the tool requirements.
AirSpeed 1000 Installation Guide C Abbreviations Table 10: ABBREVIATIONS & DEFINITIONS Term Expansion 3GPP 3rd Generation Partnership Project, responsible for LTE AWGN Additive White Gaussian Noise is a channel model in which the only impairment to communication is a linear addition of white noise with a constant spectral density and a Gaussian distribution of amplitude. BER Bit Error Rate dB Decibel.
AirSpeed 1000 Installation Guide Term Expansion MTBF Mean Time Between Failures NL Network Listening OFDMA Orthogonal Frequency-Division Multiple Access (OFDMA) is a multiple access version of OFDM digital modulation scheme, used for eNodeB transmissions to UEs PDU Protocol Data Unit PTP Precision Time Protocol is used to synchronize clocks throughout a network. In this document, PTP is referring to IEEE1588-2008 protocol ROHS Restriction Of Hazardous Substances S-GW Serving Gateway.