User Manual
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 26, 2022
Product Diagram (USB210AIND-USB-A-HUB)
Front View
Rear View
Ports/Parts Function
1 DC Power Input • Connect a +5~24 V DC Power Source
2
DC 2-Wire Terminal Block
Power Input
• Connect a +5~24 V DC Power Source
3 USB Type-B Host Port
• USB Type-B 480 Mbps (USB 2.0)
• Connect the USB Hub to a Host Computer
4 USB Type-A Ports (x 10)
• USB Type-A 480 Mbps (USB 2.0)
• Connect up to 10 USB Type A Peripheral Devices
5 Mounting Holes
• Wall mount the USB Hub
• Mount the USB Hub to the side/underside of a
Desk
10-Port Industrial USB 2.0 (480 Mbps) Hub - 15 kV/8 kV Air/Contact ESD Protection - Wall/DIN Rail Mountable
6
DIN Rail Mounting
Holes, Horizontal
• Used to Horizontally mount the USB Hub to a DIN
Rail
7
DIN Rail Mounting
Holes, Vertical
• Used to Vertically mount the USB Hub to a DIN Rail
Package Contents
• USB 2.0 Hub x 1
• DIN Rail Mounting Brackets x 2
• USB 2.0 Type-A to Type-B Cable x 1
• Screw Kit x 1
• Quick-Start Guide x 1
Requirements
For the latest product information, technical specications, manuals, and declarations of
conformance, please visit:
www.startech.com/USB210AIND-USB-A-HUB
• Flat Head Screwdriver
• Phillips Head Screwdriver
• Writing Utensil
• Level
• DC Power Source
• (Optional) Stud Finder & Electric Driver
Installation
Notes:
• Connect the Power Source after all the other installation steps have been completed.
• There are two ways to power the USB Hub.
Using an external DC Power Adapter or a Terminal Block Power Source. Voltage
(+5 - 24 V DC).
Connect the USB Ports
1. Connect the USB 2.0 Type-A to Type-B Cable to the USB Type-B Host Port,
located on the USB Hub, and to a USB-A Port, located on the Host Computer.
2. The Host Computer’s Operating System will detect the USB Hub.
3. Connect up to 10 USB Peripheral Devices to the USB Type A Ports, located on the
USB Hub.
2
1
3 4
5 6 7