User Manual

ManualsBrandsNot Assigned ManualsAccessoriesStarTech.com 2U Wall Mount Rack, 19" Wall Mount Network Rack, 14 inch Deep (Low Profile), Wall Mounting Patch Panel Bracket for Network Switches, IT Equipment, 77lb (35kg) Capacity Network Equipment Rack - network device mounting bracket - 2U - 19"

Quick-Start Guide

Manual Revision: March 11, 2022 11:23 AM

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product IDs

RACK-2U-14-BRACKET

RACK-10U-14-BRACKET

RACK-14U-14-BRACKET

Product Diagram

Front View

Component Function

1 Stabilizer Bar

• Stabilize the Wall-Mounting Bracket when

equipment is loaded

2 Grounding Stud

• (Optional - Recommended) Attach a Grounding Wire

(sold separately) to the Wall-Mounting Bracket and

to an Earth Ground Connection

Wall Mounting Holes

(x 4)

• Wall mount the Wall-Mounting Bracket

Wall-Mounting Bracket for Patch Panel - 14 in. Deep

Cable Management

Slots

• (Optional - Recommended) Route the equipment

Cables

• Cut an appropriately sized hole behind the Wall-

Mounting Bracket to route the Cables.

-- Or --

• The Cables can be routed out of the top/bottom

of the Wall-Mounting Bracket

5 Cage Nut Holes

• Use Cage Nuts to mount equipment into the Wall-

Mounting Bracket

Product Information

For the latest manuals, product information, technical specications, and declarations

of conformance, please visit:

www.StarTech.com/RACK-2U-14-BRACKET

www.StarTech.com/RACK-10U-14-BRACKET

www.StarTech.com/RACK-14U-14-BRACKET

Requirements

• Phillips Head Screwdriver

• (Optional - Recommended) Grounding Wire

• (Optional - Recommended) Earth Ground Connection

• (Optional) 10mm Wrench

• (Optional) Cage Nut Tool

Warnings

• Read the entire manual and ensure the instructions are fully understood before

assembling and/or using this product.

• Before adding equipment to this product, ensure this product has been properly

mounted.

• The mounting hardware included with this product might not be adequate for some

wall structures. If lacking the necessary expertise to wall mount this product, contact

a construction professional to install the wall mount or to provide specic mounting

instructions for the wall structure.

• Ensure the weight of the equipment does not exceed the weight capacity of this

product. If the weight capacity is exceeded, personal injury or damage to the

equipment are possibilities. This product can support the following weight: up to 35

kg (77.2 lb.).

*Product may vary from image

Summary of content (2 pages)

PAGE 1
Quick-Start Guide Wall-Mounting Bracket for Patch Panel - 14 in. Deep Product IDs RACK-2U-14-BRACKET RACK-10U-14-BRACKET RACK-14U-14-BRACKET Management 4 Cable Slots • (Optional - Recommended) Route the equipment Cables • Cut an appropriately sized hole behind the WallMounting Bracket to route the Cables.
PAGE 2
• Wall structures vary. Ensure the type of wall structure and mounting hardware will properly support the mounted equipment. Failure to do so might result in personal injury and/or equipment damage. The wall structure should be capable of supporting at least four times the weight of the mounted equipment.