Product Data Sheet / Brochure

1-Port HDMI over Cat6 Receiver - 4K 60 Hz, HDR,
4:4:4, PoC, HDCP 2.2, 230 ft. (70.1 m), TAA
MODEL NUMBER: B127A-1A0-BH
Works with a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K video 230 ft. to an HDMI
display via Cat6 cable.
Features
HDMI Extender Receiver Ideal for Digital Signage in Schools and Workplaces
This 4K receiver is recommended for video presentations in conference rooms, schools, trade shows,
meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where
the source and display are farther apart than conventional A/V cables allow.
Extends a 4K A/V Transmission up to 230 ft….or Even Farther
The B127A-1A0-BH connects to a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K
signals from an HDMI source to an HDMI display up to 230 feet (70.1 meters) away via user-supplied
Cat6 cabling. By adding a Tripp Lite B127A-010-H signal repeater (sold separately) to the application, you
can extend the signal up to 400 feet (121.9 meters).
Supports Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-1A0-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel
surround sound audio via TOSLINK. High Dynamic Range (HDR) provides a wide range of vibrant colors
with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance
allows you to stream 4K Amazon and Netflix content with no complications. This receiver also supports
4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in
equalization allows you to fine-tune the image quality at the remote display.
Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the B127A-1A0-BH over Cat6 cable. LEDs indicate when the
system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky
power brick and gives you the freedom to place the receiver where needed without worrying about finding
a nearby AC outlet.
Plug-and-Play Operation for Quick Setup and Immediate Use
The receiver works right out of the package with no software required. Mounting hardware is included for
installing it on a wall, pole or 19-inch rack. Connect the receiver to a transmitter, switch or splitter with
user-supplied Cat6 cable (such as Tripp Lite’s N202-Series). Connect to a 4K display with a user-supplied
HDMI cable (such as Tripp Lite’s P568- or P569-Series).
TAA-Compliant for GSA Schedule Purchases
Highlights
Supports 4K @ 60 Hz video
resolutions (4:4:4) as specified
in HDMI 2.0
●
Carries High Dynamic Range
(HDR) signals for rich contrast
and expanded color accuracy
●
Combines with optional B127A-
010-H repeater to extend signal
to 400 ft.
●
Power over Cable (PoC)
technology provides power to
the receiver via Cat6 cable
●
Compliant with the Federal
Trade Agreements Act (TAA) for
GSA Schedule purchases
●
Applications
Extend video signals from one
room to another using Cat6
cable, which can pass through
conduit to meet building codes
●
Gain flexibility in where the
receiver is placed, with the
freedom to move and relocate it
away from an AC outlet
●
Improve the line of sight for
digital signage in a hotel,
restaurant, theater, house of
worship, trade show or other
location
●
System Requirements
Source device with HDMI output
(Blu-ray player, cable box,
laptop)
●
Display device with HDMI input
(HDTV, projector, monitor)
●
Tripp Lite B127A-Series
transmitter, switch or splitter
●
Package Includes
B127A-1A0-BH 1-Port HDMI
over Cat6 Receiver
●
Mounting hardware
●
Owner’s manual
●
1 / 5