User Manual

ManualsBrandsNot Assigned ManualsAccessoriesStarTech.com 2-Port 8K HDMI Switch, HDMI 2.1 Switcher 4K 120Hz/8K 60Hz UHD, HDR10+, HDMI Switch 2 In 1 Out, Auto/Manual Source Switching, Remote Control and Power Adapter Included 7.1 Channel Audio/eARC - video/audio switch - 2 ports

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 22, 2022 9:21 AM

Product ID

2PORT-HDMI-SWITCH-8K

Front

Rear

Sides

Remote Control

2-Port HDMI Video Switch - 8K 60Hz - USB Powered

Component Function

1 Power LED Indicator

• Solid Red: HDMI Switch in Standby Mode

• Solid Blue: HDMI Switch is powered on and

operational

2 Port Selection Indicator • Solid Blue: HDMI Input Port is active

3 Auto Switching Indicator

• Solid Blue: Automatic Switching is enabled

• LED O: Automatic Switching is disabled

4 IR Mode Indicator

• Solid Blue: IR Receiver enabled, Remote Control

will operate the HDMI Switch

• LED O: IR Receiver disabled, Remote Control

will not operate the HDMI Switch

5 Push Button Selector

• Switch between HDMI Input 1 and HDMI Input

6 USB Power Input

• Connect the included USB Wall Charger and

USB Micro-B Power Cable

7 HDMI Output Port • Connect to an HDMI Display

8 HDMI Input Ports • Connect to an HDMI Source Device

Mounting Bracket Screw

Holes

• Connect the included Mounting Brackets

• Holes are on each side of the HDMI Video

Switch

Product Information

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/2PORT-HDMI-SWITCH-8K

Package Contents

• HDMI Video Switch x 1

• Remote Control (Batteries Not Included) x 1

• Mounting Kit x 1

• USB Wall Charger x 1

• USB Micro-B Power Cable x 1

• Rubber Feet x 4

• Quick-Start Guide x 1

6 7 8

1 2 3 4 5

* Actual product may vary from photos

Summary of content (2 pages)

PAGE 1
Quick-Start Guide 2-Port HDMI Video Switch - 8K 60Hz - USB Powered Product ID Component 4 IR Mode Indicator 5 Push Button Selector • 6 USB Power Input • 7 HDMI Output Port • Function Solid Red: HDMI Switch in Standby Mode Solid Blue: HDMI Switch is powered on and operational Solid Blue: HDMI Input Port is active Solid Blue: Automatic Switching is enabled LED Off: Automatic Switching is disabled Solid Blue: IR Receiver enabled, Remote Control will operate the HDMI Switch LED Off: IR Receiver di
PAGE 2
Requirements • • • • • HDMI Source x 2 HDMI Display x 1 HDMI Cables (sold separately) x 3 AAA Batteries (for remote control) x 2 Philips Head Screwdriver x 1 Installation (Optional) Mounting Kit 1. 2. 3. 4. 5. Note: Before mounting the HDMI Video Switch make sure that the surface you are mounting to is strong enough to support the weight of the HDMI Video Switch. It is recommended that you mount the HDMI Video Switch on a wall stud to provide the correct support.