Technical Specifications

ManualsBrandsNorthwoods ManualsBuilding materialsSingle 7" Autumn Red Straight Edge Perfection Shingles

CertainTeed Corporation

20 Moores Road

Malvern, PA

certainteed.com



Specification Sheet



Northwoods

Single 7” Perfection Shingles

Single 7" Straight Edge Rough Split Shakes

Single 9” Staggered Rough-Split Shakes



General Description: Northwoods® 7” Perfection Shingles, 7" Straight Edge Rough-Split Shakes and 9” Staggered Rough-

Split sidings provide the

look of wood shakes and shingles, but do not require the upkeep common to wood. Northwoods

siding is manufactured with

TrueTexture™ finish molded directly from natural wood shakes and shingles. It is appropriate

for use in new construction for single

family homes, multi-housing projects and light commercial developments.

Northwoods is also an ideal product for

remodeling.



Styles:

Profile Finish Panel Panel Wall Thickness Lock Colors Accessory

Dimensions Pro

ection (Nominal) Design Pocket

7” Perfection Shingle Cedar

7” x 10’

Single Course

¾” .060”

Full Panel

Lock

17 ¾”

7" Straight Edge Rough-S

lit 7" x 10'

1” .050”

Full

13 1”

Rough-Split Shakes Cedar Single Course Panel lock

9” Stagge

Rough- Rough-S

lit 9” x 10’

1” .050”

Full

10 1”

Split Shakes Cedar Single Course Panel lock



Colors: Northwoods siding profiles are available in a wide selection of colors. All colors are Spectrophotometer controlled.

Autumn Red Charcoal Gray* Desert Tan# Granite Gray Natural Clay

Sandstone

Bei

Slate*

Buckskin Colonial White# Espresso* Hearthstone* Pacific Blue Savannah Wicker Sterling Gray

Castle Stone* Cypress Flagstone Midnight Blue* Sable Brown Seagrass*



*Available in S7 Perfection Profile only

# Not available in S7 Perfection Profile

Accessories: CertainTeed manufactures a wide range of siding accessories that are compatible with Northwoods siding

styles

and colors. Accessory products include installation components, soffit, window and door trim, corner lineals, corner

systems

and decorative moldings. Northwoods Rough Split Shake products require 1" pocket accessories. Northwoods

Perfection Shingles use ¾” pocket accessories.



Composition: Northwoods siding is produced using CertaVin™ custom-formulated PVC resin. This resin is produced

exclusively by CertainTeed, allowing CertainTeed to maintain the high quality of its siding products.



Technical Data: Northwoods siding is in compliance with ASTM specification for Rigid Polyvinyl Chloride (PVC) Siding

3679, and the requirements of section R703.11 of the International Residential Code, and section 1405.14 of the

International

Building Code. Monogram siding meets or exceeds the properties noted in Table 1.



Summary of content (2 pages)

PAGE 1
Specification Sheet Northwoods® Single 7” Perfection Shingles Single 7" Straight Edge Rough Split Shakes Single 9” Staggered Rough-Split Shakes General Description: Northwoods® 7” Perfection Shingles, 7" Straight Edge Rough-Split Shakes and 9” Staggered RoughSplit sidings provide the look of wood shakes and shingles, but do not require the upkeep common to wood. Northwoods siding is manufactured with TrueTexture™ finish molded directly from natural wood shakes and shingles.
PAGE 2
Table 1 ASTM E 84 ASTM D 1929 ASTM D 635 NFPA 268 Meets Class A flame spread requirements as tested according to ASTM E84. Self-ignition temperature 813°F Material is self-extinguishing with no measurable extent of burn when tested in accordance with this specification. Radiant Heat Test – Ignition Resistance of Exterior Walls – Conclusion that CertainTeed met the conditions for allowable use as specified in section 1406 of the International Building Code.