Owner’s Manual NLD900-R, NLD900-G
CONTENTS SAFETY 3 1. PRODUCT FEATURES 6 2. BUTTON FUNCTIONS 8 3. LCD FUNCTIONS 9 4. UNIT SETUP 10 5. SPECIFICATIONS 11 6.
Safety The instrument is not to be operated for any purpose other than what it is designed for as described in this manual. It is the user’s complete responsibility to follow the instructions in the manual. • Do not disassemble the instrument or attempt to perform any internal servicing. Repairs and servicing are to be performed only by authorized service centers. • Do not operate the unit in any other way or use any other tools or procedures different than described in this manual.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1.
1 Power Button 2 Bluetooth Switch Button 3 Sensitivity Selecting Button 4 Volume Level Selecting Button 7
2. BUTTON FUNCTIONS Power Button Short press to power on the unit. Press and hold to power off. Bluetooth Switch Button (Only works with NRL900HT-R/G Rotary Lasers) Short press to enable or disable the Bluetooth feature. Sensitivity Selecting Button Short press to swith the sensitivity between low sensitivity and high sensitivity. Volume Level Selecting Button Short press to swith the volume within muted, low volume and high volume.
3. LCD FUNCTIONS The NLD900-R/G has a segment LCD that can show the unit’s current working status.
4. UNIT SETUP Battery Charging Connect the USB cable to a 5V DC adapter. The max current of the adapter should be larger than 0.5A. Connect the same USB cable to the NLD900-R/G laser detector. Battery indicator will show red if the battery is charing, and will show green once it is fully charged. The detector can’t be powered on while connecting the USB cable. Detecting Laser Short press the Power button to power on the detector. Adjust the volume according the environment you are working.
5. SPECIFICATIONS NLD900-R Accuracy NLD900-G High Sensitivity: +/- 1.5mm per 10m Low Sensitivity: +/- 2mm per 10m Working Distance (Diameter) Rotary Laser Rotating Speed Laser Type Up to 2000ft with Detector 300/600/1200 RPM 635nm 520nm Bluetooth Range Up to 100ft Operanting Temperature -10� C ~ 50� C Battery Charging Type Micro USB of 5V 0.5A Specifications subject to change without notice.
6. MAINTENANCE AND CARE 1. Handle instrument with great care. Avoid shock and vibration. Always store and transport instrument in its carrying case. 2. Keep instrument dry and clean after use and before packing it in the carrying case. 3. Keep the glass of the laser capturing window clean. Use soft cloth and glass cleaner to clean it.
NORTHWEST INSTRUMENT, INC. Standard Warranty Terms The warranty period for the instrument grade laser is 36 months from the date of purchase. Northwest Instrument, Inc. (Seller) warrants this instrument made by Northwest Instrument to be free from manufacturing defects in materials and workmanship. For claims to be made under this warranty the instrument must be inspected by Northwest Instrument and the defect must be proven to Seller’s satisfaction.
B. This warranty does not apply to regular required maintenance such as cleaning, adjusting, lubricating or calibrating unless required as a result of a defect in workmanship or materials. If upon examination of the instrument, the Seller determines that additional repair services are required and not covered under this warranty, the Seller shall notify the Buyer of such repair charges and proceed only after authorization has been received. C.
69 King Street, Dover, NJ, 07801 Tel: (973) 347-6830 Fax: (973) 347-6870 Website: www.nwismart.