User's Guide

AWE/AWE Charger
USER GUIDE
Version 1.0
Awe User Guide: AWE models: OTbeat Link, AWE01
AWE Charger models: OTbeat Link Charger Case, AWEC01
Included in packaging: AWE, AWE Charger, USB type C cord.
Getting Started
1. Charge AWE and AWE Charger units.
1.1. Plug the USB type C end of the cable into the AWE Charger USB port.
1.2. Plug the USB type A end of the cable into a powered USB port (type A) such as a
computer USB port or USB wall adapter.
1.3. Place AWE into AWE Charger case for charging. The AWE may be charged with the
AWE Charger on USB power or battery power.
1.4. AWE Charging case LED guide.
1.4.1. When Charging case is USB powered:
Green LED continuously on: case fully charged.
Orange LED continuously on: case NOT fully charged.
The LED will be on during the duration that the case is USB powered.
1.4.2. Charging case Not USB powered and case is open.
Green LED continuously on: case fully charged.
Orange LED continuously on: case NOT fully charged.
Red LED continuously on: case charge level is below 10%.
The LED will be on for 10 seconds upon opening the case after which the
LED shall be turned off.
2. Download Apple Watch App.
2.1. Using your iOS device, download the Orangetheory Apple Watch App from the Apple
Watch App store.
3. AWE Placement
3.1. Place the AWE model OTbeat Link onto the Apple Watch wrist band.

Summary of content (3 pages)