Blue Tiger Advantage PLUS User Manual bluetigerusa.
CONTENTS Thank You 3 Please Read this Reference Manual 3 Features 3 Charge the Battery 4 Connecting Headset to Device 4 Pairing 4 Phone Calls 5 Answer Call End Call Ignore Incoming Call (1st or 2nd call) Answer 2nd Incoming Call Custom User Functions 6 Changing Language Turning the Blue Tiger LED On/Off Microphone Mute Voice Activation Understanding LED Lights and Tones 7 Position the Boom 8 Adjust Headband 8 Mic Boom Tension & Headband Disassembly
THANK YOU We appreciate your purchase of the Blue Tiger Advantage PLUS Headset. This rugged wireless Headset combines high-quality audio performance, environmental durability, and lightweight comfort without sacrificing stability during active use. PLEASE READ THIS REFERENCE MANUAL Please take the time to follow the instructions in this reference guide carefully. It will help you set up and operate your Advantage PLUS Headset properly and enjoy its advanced features.
CHARGE THE BATTERY 1. Remove the USB Charging Port Cover and connect Charging Cable to a USB adapter. 2. Insert the Charging Cable into the Headset USB Port. 3. Charge for 3 hours prior to use. Solid Red LED indicates charging. Solid Blue LED indicates headset is fully charged. CONNECTING HEADSET TO DEVICE To use the Advantage PLUS Headset with a Bluetooth Device, such as a smartphone or laptop computer, you must first establish a wireless connection between the Headset and the intended device.
Once successfully paired, you will hear “Device Connected” and the LED will flash blue, once every two seconds indicating the Headset and Bluetooth Device are connected. The Headset may be paired to a new Bluetooth Device using the above procedure. Note that this will undo the pairing to the current Bluetooth Device.
CUSTOM USER FUNCTIONS Changing Language Change the Headset voice prompt language by pressing the Multi-Function Button (MFB) and Vol+ button simultaneously for 1 second. This function can only be activated in standby or connected mode. The following languages are selectable: English, French, German, and Spanish. Each successive button press will cycle to the next language. Turning the Blue Tiger LED On/Off The Blue Tiger LED can be turned off by pressing Vol+ and Vol- simultaneously for 5 seconds.
UNDERSTANDING LED LIGHTS AND TONES Primary Features Headset Control LED Light Tones Pairing Powered Off, Press MFB for 6 Seconds Blue and Red Alternate Flash “Pairing, Please Wait” Pairing Complete Automatic No LED Output “Device Connected” Pairing Failure Automatic No LED Output “Pairing Incomplete” Power On/Off Press MFB for 2.
POSITION THE BOOM Do not rotate the boom beyond the stop point. Stop Point Left Side Boom Placement Stop Point Right Side Boom Placement ADJUST HEADBAND The black coated stainless-steel headband will click as it is lengthened or shortened to size for a comfortable position. The headband can also be squeezed or stretched by carefully bending for a tighter or a looser fit to the head. When adjusting the headband: • Position the ear cushion in the center of the ear.
MIC BOOM TENSION & HEADBAND DISASSEMBLY The microphone boom position tension can be adjusted. Simply tighten or loosen the mic boom by tightening or loosening the Boom Tightening Knob (Set Screw) as shown. 1. Loosen the Headband Set Screw (counterclockwise) or tighten (clockwise) to loosen or tighten the boom position up or down. It is not necessary to disassemble your Advantage PLUS Headset.
INSTALL WINDSCREEN AND EAR CUSHION The microphone Windscreen and the speaker Ear Cushion are both easily replaceable. 1. Slide the mic Windscreen over the microphone assembly like a sock. 2. The Ear Cushion snaps on to the headband assembly. Unsnap the cushion from the headband to replace or interchange between the foam or leather cushions (both included).
Volume levels are measured in decibels (dB). Exposing your ears to any noise at or above 85 dB can cause gradual hearing loss. According to the Occupational Safety and Health Administration (OSHA), listening to volume levels over 100 dB for more than two hours at a time can lead to hearing loss. *Your Advantage PLUS headset has the capability to reach a colume level that exceeds 100 dB. **Please exercise caution. http://www.osha.
TROUBLESHOOTING Operation Problem Possible Solution Make sure Headset is fully charged. Operating Headset will not Turn On. Make sure Headset is charged by placing USB Cable in USB Charging Slot and follow the Headset charging instructions. Headset should be OFF when beginning the pairing process. Make sure intended Bluetooth Device is turned on. Does not Pair.
SAFETY AND REGULATORY INFORMATION • Warnings for use of Wireless Devices. Please observe all warning notices with regard to the usage of wireless devices. • Potentially Hazardous Atmospheres – Vehicles Use. You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine.