User's Manual
Nortek Security &Control | 1950 Camino VidaRoble, Suite 150 | Carlsbad, CA92008-6517 | USA | 800-421-1587 | www.nortekcontrol.com
Copyright © 2017 Nortek Security &Control LLC.
1
FCC Integration Instructions:
As the Module Integrator, you must provide the information below in the host
device users manual.
FCCPart 15: Class B Digital Device Statement
FCC ID: EF400150
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept interference received, including interference that
may cause undesired operation.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one (1) or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: Any changes or modifications made to this device that are not
approved by 2GIG may void the authority granted to the user by the
FCCto operate this equipment.
IMPORTANT
To satisfy FCC/IC RF exposure safety requirements, a separation distance of 10
mm or more should be maintained between this device and person’s body
(excluding extremities: hands, wrists, feet and ankles).
As the Module Integrator, you must provide the following information on the host
device label:
Contains FCC ID: EF400150
If space permits, include the following statement:
This device has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
interference received, including interference that may cause undesired
operation.
Limited Warranty
This product is warranted against defects in material and workmanship for one (1)
year. This warranty extends only to wholesale customers who buy directly from
Nortek Security &Control LLC or through Nortek Security &Control’s normal
distribution channels. Nortek Security &Control LLC does not warrant this product
to consumers. Consumers should inquire from their selling dealer as to the nature
of the dealer’s warranty, if any.
There are no obligations or liabilities on the part of Nortek Security &Control LLC
for consequential damages arising out of or in connection with use or performance
of this product or other indirect damages with respect to loss of property, revenue,
or profit, or cost of removal, installation, or re-installation. All implied warranties for
functionality are valid only until the warranty expires. This Nortek Security
&Control LLC Warranty is in lieu of all other warranties, expressed or implied.
All products returned for warranty service require a Return Authorization Number
(RA#). Contact Returns at 1-855-546-3351 for an RA# and other important
details.
2GIG® Security & Automation System
2GIG-XCVR-915-Transceiver Intigration Instructions 10016204 C