User's Manual

ManualsBrandsNortek Security & Control ManualsElectronicsSECURITY ALARM TRANSMITTER

TTLDW

UNIVERSAL

DOOR/WINDOW

TRANSMITTERS

Installation Instructions

PRODUCT DESCRIPTION

The TTLDWO01 and TTLDWC01 are battery powered supervised stationary transmitters. These

transmitters can be used in a variety of wireless security and remote sensing applications.

Triggering the transmitter with its built-in magnetic switch sends a digitally coded wireless signal

to the alarm control.

Both models have an optional external input that can be triggered by dry contact devices. The

Model TTLDWC01 connects to normally closed (N/C) devices. The Model TTLDWO01 connects to

normally open (N/O) devices. The transmitter is programmed using Conﬁ guration Mode to select

the internal magnetic switch only, the external contact input only, or both.

The transmitter can send ﬁ ve different signal types: fault, restore, low battery, tamper, and status.

The system must be programmed to the transmitter’s code before testing and operation. Refer to

the alarm control’s instructions for details on programming.

In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted

on the frame. When the door or window is opened, the magnet moves away from the transmitter

and a fault signal is sent. When the door or window is closed, the magnet returns next to the

transmitter and a restore signal is sent.

About every 65 minutes the transmitter sends a supervisory status signal to update the system.

If the battery tests low, a low battery signal is included with any transmission. The transmitter is

powered from two 3-Volt CR2032 lithium batteries (included).

An internal switch detects if the transmitter’s case is opened. Opening the case will send a tamper

signal. Two screws and double-stick tape are provided for mounting the transmitter.

FEATURES

BATTERY INSTALLATION OR REPLACEMENT INPUT CONFIGURATION MODE OPTIONAL EXTERNAL CONTACT

TRANSMITTER MOUNTING PROGRAMMING & TESTING TATTLETALE PORTABLE ALARM SYSTEMS LIMITED WARRANTY

This TATTLETALE PORTABLE ALARM SYSTEMS product is warranted against defects in material and

workmanship for a period of one year. This warranty does not apply in cases of improper installation, misuse,

failure to follow installation and operating instructions, alteration, abuse, accident or tampering, or repair by anyone

other than tattletale. This warranty does not cover the replacement of batteries that are used to power the product.

There are no obligations or liabilities on the part of TATTLETALE PORTABLE ALARM SYSTEMS for consequential

damages arising out of or in connection with use or performance of this product or other indirect damages with

respect to loss of property, revenue, or proﬁ t, or cost of removal, installation or reinstallation. All implied warranties,

including implied warranties for merchantability and implied warranties for ﬁ tness, are valid only until the warranty

expires. This TATTLETALE PORTABLE ALARM SYSTEMS Warranty is in lieu of all other warranties express or

implied.

All products returned for warranty service require a Return Merchandise Authorization Number (RMA#). Contact

TATTLETALE Technical Support at 1-888-835-5668 or at www.tattletale.com for an RMA # and other important

details.

This device complies with FCC Part 15 and Canada Rules and Regulations. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Conformité Réglementaire

Ce dispositif est conforme à la réglementation de la IC et (Partie 15) de la FCC. Son fonctionnement est soumis à

deux conditions : (1) ce dispositif ne doit pas causer d’interférences nuisibles, et (2) ce dispositif doit accepter toute

interférence reçue, y compris les interférences pouvant entraîner des conditions de fonctionnement indésirables.

Changes or modiﬁ cations to the device may void FCC compliance

Les modiﬁ cations apportées à l’appareil peuvent annuler la conformité FCC.

www.tattletale.com

6269 Frost Road. Westerville OH 43082

PRINTER’S INSTRUCTIONS:

INSTR,INSTL,TTLDWO&C01 - FILE NAME: 235240 X11- INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 11.000” X 8.500” - SCALE: 1-1

TRANSMITTER

MAGNET

DOUBLE-STICK

TAPE

EXTERNAL

CONTACT LEADS

MOUNTING

SCREWS

MAGNET

ALIGNMENT

MARKS

EXTERNAL

CONTACT

MAGNET

3 FEET MAXIMUM

EXTERNAL

CONTACT

CONNECTOR

AN EXTERNAL CONTACT CAN BE CONNECTED TO THE TRANSMITTER

PLUG THE EXTERNAL CONTACT LEADS INTO THE

TRANSMITTER'S EXTERNAL CONTACT CONNECTOR

WIRE THE EXTERNAL CONTACT TO THE LEADS

FOR MODEL TTLDWC01 USE NORMALLY CLOSED CONTACTS

FOR MODEL TTLDWO01 USE NORMALLY OPEN CONTACTS

TRANSMITTER ON

DOOR FRAME

MAGNET

ON DOOR

OPENING OR

CLOSING THE DOOR

TRIGGERS THE

TRANSMITTER

INSTALLATION TIP: TO MINIMIZE PHYSICAL SHOCK

TO THE UNIT, ALWAYS MOUNT THE TRANSMITTER

ON THE STATIONARY PART OF THE OPENING

1/2" GAP

MAXIMUM !!!

MOUNT MAGNET NEXT

TO ALIGNMENT MARKS

ATTACH MOUNTING PLATE

WITH TWO SCREWS OR USE

THE DOUBLE-STICK TAPE

NOTE: MOUNTING THE TRANSMITTER WITH

DOUBLE-STICK TAPE IS NOT ALLOWED IN

UL INSTALLATIONS

REFER TO THE SYSTEM'S

INSTRUCTIONS AND PLACE THE

ALARM CONTROL IN PROGRAM MODE

VERIFY THAT THE TRANSMITTER

HAS BEEN "LEARNED" BY

THE ALARM CONTROL

OPEN OR CLOSE THE PROTECTED

DOOR TO SEND A SIGNAL

SIGNAL TO

RECEIVER

OPEN

DOOR

TEST THE SYSTEM TO VERIFY

PROPER OPERATION, CHECK

THAT THE SYSTEM INDICATES

WHEN THE DOOR IS OPEN

OR CLOSED

NOTICE TO USERS IN CALIFORNIA - CR COIN CELL LITHIUM BATTERY

INFORMATION: THIS PRODUCT CONTAINS A CR COIN CELL LITHIUM

BATTERY WHICH CONTAINS PERCHLORATE MATERIAL - SPECIAL

HANDLING MAY APPLY - SEE

www.dtsc.ca.gov/hazardouswaste/perchlorate

KEEP AWAY FROM SMALL CHILDREN. IF BATTERIES ARE

SWALLOWED, PROMPTLY SEE A DOCTOR. DO NOT TRY TO

RECHARGE THESE BATTERIES. DISPOSAL OF USED BATTERIES

MUST BE MADE IN ACCORDANCE WITH THE WASTE RECOVERY

AND RECYCLING REGULATIONS IN YOUR AREA.

TWIST SCREWDRIVER IN SLOT

ON EITHER SIDE TO OPEN CASE

OBSERVE

POLARITY !!!

TWO CR2032 BATTERIES

INSTALL WITH + SIDE UP

TO REMOVE BATTERIES, TWIST

SMALL SCREWDRIVER HERE

CONFIGURATION MODE SELECTS IF THE TRANSMITTER USES THE INTERNAL

MAGNETIC SWITCH ONLY, THE EXTERNAL CONTACT INPUT ONLY, OR BOTH

PRESS AND HOLD THE TAMPER SWITCH

TAMPER

SWITCH

INSTALL THE BATTERIES, RELEASE THE

TAMPER SWITCH,

CONFIGURATION

MODE WILL LAST FOR 15 SECONDS

TO SELECT EXTERNAL CONTACT ONLY:

BE SURE MAGNET IS AWAY FROM TRANSMITTER

AND EXTERNAL CONTACT INPUT IS DISCONNECTED

TO SELECT INTERNAL MAGNETIC SWITCH ONLY:

BE SURE THE EXTERNAL INPUT IS DISCONNECTED,

MOVE MAGNET NEXT TO TRANSMITTER (BY THE

TAMPER SWITCH) FOR A MINIMUM OF ONE SECOND

WHILE IN CONFIGURATION MODE:

TO SELECT EXTERNAL CONTACT & INTERNAL SWITCH:

BE SURE MAGNET IS AWAY FROM TRANSMITTER,

CONNECT EXTERNAL CONTACT INPUT WIRES

TOGETHER FOR A MINIMUM OF ONE SECOND

MOVE MAGNET

NEXT TO UNIT

FOR INTERNAL

MAGNETIC SWITCH

USE ONLY

TO ENTER CONFIGURATION MODE:

Summary of content (1 pages)

PAGE 1
PRINTER’S INSTRUCTIONS: INSTR,INSTL,TTLDWO&C01 - FILE NAME: 235240 X11- INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 11.000” X 8.500” - SCALE: 1-1 PRODUCT DESCRIPTION TTLDWO01 TTLDWC01 FEATURES The TTLDWO01 and TTLDWC01 are battery powered supervised stationary transmitters. These transmitters can be used in a variety of wireless security and remote sensing applications. Triggering the transmitter with its built-in magnetic switch sends a digitally coded wireless signal to the alarm control.