Quick Start Guide

ManualsBrandsNortek Security & Control LLC/GTO Access ManualsElectronicsSmart Controller

PRINTER’S INSTRUCTIONS

MANUAL, INSTRUCTIONS, MMS100 - P/N: 10023523 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.5X11”, TOL. +/- 0.125, SCALE: 1:1, FRONT & BACK, FOLD TO FIT BOX

MMS100

Wireless Connectivity System

Installation Manual

AT THE GATE - INSTALLING THE RADIO MODULE

Prior to any assembly of the MMS100, ensure that the Mighty Mule gate operator is turned OFF and disconnected from its power source.





If required, punch out the access hole for the Auxiliary Antenna.





Align the connectors, then plug in the small radio module into the operator control board.





Guide the radio module antenna cable through the Auxiliary Antenna hold, then twist and tighten the antenna pointing upward.



Auxiliary

Antenna

Access

(Punch Out)

WiFi ROUTER - Setting Up and Provisioning The Bridge

Install/locate the bridge near your wireless router.

Connect the Antenna and plug in the Bridge.

Plug in the MMS100 (only one gate operator can be connected to your Bridge).

To pair/connect the MMS100 to your WiFi:

Download the Mighty Mule App from the

Apple App Store

Google Play Store

Create a Mighty Mule account, then sign in.

Select

Add Device

on the home screen.

Select

Gate

from the pop-up menu, then follow the instructions in the App (or refer to the quick start guide for your specifi model at

www.mightymule.com).

NOTE

: Your Mighty Mule gate operator should be installed prior to setting up the MMS100 Wireless Connectivity System.









PAI

RESET

Summary of content (4 pages)

PAGE 1
PRINTER’S INSTRUCTIONS MANUAL, INSTRUCTIONS, MMS100 - P/N: 10023523 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.5X11”, TOL. +/- 0.125, SCALE: 1:1, FRONT & BACK, FOLD TO FIT BOX MMS100 Wireless Connectivity System Installation Manual NOTE: Your Mighty Mule gate operator should be installed prior to setting up the MMS100 Wireless Connectivity System.
PAGE 2
Establishing Communication Between the Bridge and your Mighty Mule Gate Operator (with radio module installed) PAIR RESET Bridge Module Control Box with Control Board NOTE: The radio module and the bridge module are paired at the factory. They will attempt to connect after the unit is provisioned. Establishing Communication Between the Bridge and Your Mighty Mule Gate Operator 1. Communication between the Control Board (with radio module) and Bridge Module will automatically attempt to connect. 2.
PAGE 3
LED Indication Lights and Status LED Indication Lights Color State Status Green Solid Connected to router, server & AGO. Normal status. Green Flashing Connected to router. Not connected to server. Yellow Flashing Obtaining IP Red Solid Offline. No access point. Red Slow Flash Fast Flash Not connected to access point. User initiated pairing via App. Flashing Connecting and/or checking OTA. Pink Solid OTA in process. Blue Flashing Connected to router & server. Not connected to AGO.
PAGE 4
This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.