User's Manual

Document: 3 1 / 2
2019-04-04
EXA21 RF safety training
NORDIC ID EXA21 RF SAFETY TRAINING
INTENTION AND PURPOSE OF THIS DOCUMENT IS TO GIVE INFORMATION OF CORRECT
AND SAFE USE OF NORDIC ID EXA21. THIS GUIDELINE IS TO NORDIC ID PARTNERS,
RESELLERS AND ESPECIALLY END CUSTOMERS WHO WILL USE THIS PRODUCT IN THEIR
WORK.
The product/system described in this documentation may be operated only by personnel qualified
for the specific task in accordance with the relevant documentation, its warning notices and safety
instructions. Qualified personnel are those who, based on their training and experience, can
identify risks and avoiding potential hazards when working with these products/systems.
Nordic ID products may only be used for the applications described in the user manual and in the
relevant technical documentation. If products and components from other manufacturers are used,
these must be recommended or approved by Nordic ID. Proper transport, storage, installation,
assembly, commissioning, operation and maintenance are required to ensure that the products
operate safely and without any problems. The permissible ambient conditions must be complied
with. The information in the relevant documentation must be observed.
Also with This information users will increase their awareness and knowledge of nordic id EXA21 RF
(radio Frequency) safety. this material will be part of partner, reseller and end customer training
packet.
NOTICE
Forfeiture of approvals and guarantees
Alterations to the devices are not permitted.
Failure to observe this requirement shall constitute a revocation of the radio equipment
approvals and manufacturer's warranty.
WARNING
Repairs only by authorized qualified personnel
Unauthorized opening of and improper repairs to the device may result in
substantial damage to equipment or danger. Repairs may only be carried out by
authorized qualified personnel.

Summary of content (2 pages)