NORDIC ID MERLIN 5. GETTING STARTED PARTS 1. 1. 2. 3. 4. 5. 6. Read the ‘Safety Precautions’ chapter. If you need to install a SIM card, turn to page 5. If you need to install a microSD card, turn to page 5. Install the battery. Charge the battery. Power up your new Merlin. 2. 3. 4. 5. 6. 10. 7. 6 9 8. 9. 10.
Nordic ID Merlin Cross Dipole UHF RFID Nordic ID Merlin Blade HF RFID Nordic ID Merlin HF/UHF RFID NORDIC ID MERLIN KEYS 1. 2. 3. 4. 5. 6. 7.
BATTERY REMOVING THE COVER 2. 1.
INSTALLING SIM & MICRO SD CARDS INSTALLING THE SIM CARD The SIM card holder is inside the battery compartment. First remove the battery to access the SIM card holder. Insert SIM card until holder locks with click sound. INSTALLING THE MICRO SD CARD The microSD card holder is inside the battery compartment, below the battery. First remove the battery to access the microSD card holder.
NORDIC ID MERLIN CHARGERS Nordic ID Merlin has the following chargers available: Desktop charger with USB connection, Vehicle charger with USB connection, Desktop communication charger with Ethernet and USB connections, 4-slot battery charger and 4-slot desktop charger. 4-SLOT BATTERY CHARGE DETACH THE DEVICE FROM THE CHARGER 1. 2. Press Lift 2. DESKTOP CHARGER with Ethernet and battery charging slot 4-SLOT DESKTOP CHARGER 1.
NORDIC ID MERLIN CHARGERS DESKTOP/VEHICLE CHARGER AND ITS SWIVEL FASTNER Included items: - Charger body - Swivel with assembly plate - Power supply The charger has a slot for handheld charging with locking mechanism, USB connector, power connector for power supply, and place for fixed mounting power supply. Swivel is used for supporting the charger in desktop use and in installing the charger to wall, car etc. Swivel bottom VEHICLE CHARGER SET plate can be used in fixed installations.
NORDIC ID MERLIN CHARGERS DESKTOP COMMUNICATION CHARGER Spare battery charging indicator led ( 4. ) has two colors: Included items: - Charger body - Power supply and cable (EU, UK, US) • RED: Battery is being charged • GREEN: Battery is full The charger has a slot for handheld charging with locking mechanism, USB connector, Ethernet connector, power connector for power supply, and a slot for spare battery charging. Charging temperature: 0ºC to +40ºC 2.
CHARGING To charge the handheld: 1. Place the handheld into the charger 2. Turn on the handheld. POWER ON/OFF POWER UP THE UNIT 1. Press Power key POWER OFF Press the power button on the lower right corner of the keyboard. Choose the preferred power off functionality. RESET THE DEVICE Charging indicator RED: Charging ORANGE: Over 90% full, but charging GREEN: Fully charged Charge the handheld for at least 8 hours before taking it into use the first time.
READING RFID TAGS NORDIC ID MERLIN UHF & HF RFID NORDIC ID MERLIN CROSS DIPOLE UHF RFID NORDIC ID BLADE HF RFID Optimal reading direction with Nordic ID Merlin UHF and Nordic ID Merlin HF are forward along the device axis from the top of the device. The antenna is horizontally linear polarized and provides best performance when tag polarization is aligned with the device.
CARE AND MAINTENANCE Your Nordic ID Merlin contains delicate electronic parts. Therefore it is vulnerable to environmental factors such as dirt, extreme temperatures, humidity and mechanical stress. Treat your Merlin with care. The following hints help you to preserve your device’s functionality and longevity. CLEANING • The device can be wiped clean with a damp, non-abrasive, clean, lint-free cloth. • Do not use harsh chemicals, strong detergents, or abrasive cleaners to clean the device.
POWER SUPPLY Check that the power supply in the box is one of the following approved power supply models, and that it is suitable for your ac mains supply: Manufacturer Model EDAC Sino American Ten Pao Cincon Cincon EA10402M-240 SA130B-24U S040EM2400167 TRG30R240V TRG36A24 Use only the approved power supply for charging the rechargeable batteries of Nordic ID Merlin; do not use the power supply for any other purposes. Use the power supply indoors at normal room temperatures.
Ne pas exposer la batterie directement au soleil, ou à toutes autres sources de chaleur. Veuillez jeter la batterie selon les normes écologiques en accord avec les autorités locales et les lois et régulations en vigueur. Nordic ID Merlin contient également sauvegarder les piles dans l'appareil qui ne sont pas modifiables. Importateur des dispositifs de Nordic ID prend soin de l'élimination correcte de l'appareil à la fin de sa vie utile.
Français Par la présente Nordic ID Oy déclare que l’appareil NORDICID Merlin est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano Con la presente Nordic ID Oy dichiara che questo NORDICID Merlin è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
compliance could void the user’s authority to operate the hand-held equipment. FCC Compliance Notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
END USER LICENSE AGREEMENT IMPORTANT – READ CAREFULLY THESE END USER LICENSE TERMS BEFORE INSTALLING OR USING THE SOFTWARE. By using the Device on which Software is installed, You agree to be bound by the License Terms, including the warranty disclaimers and limitations of liability provisions below. If You do not agree to the License Terms, You may not use the Device or install the Software.
versions of the Software. In the event of any such transfer, You shall remain liable and responsible to Nordic ID for the performance of all of Your duties and obligations under the License Terms. You agree to grant Nordic ID and its independent accountants the right to examine Your books, accounts and records to verify compliance with the License Terms.
the entire agreement with respect to the license of Software and supersedes any conflicting or additional terms.
REPAIR NORDIC ID This device has a two year limited warranty. Myllyojankatu 2 A 24100 SALO, FINLAND tel. +358 2 727 7700 fax +358 2 727 7720 www.nordicid.com Nordic ID provides repair services for its products during and after their warranty period. Nordic ID serves customers together with its full support and primary support partners throughout Europe. The full support centers handle both warranty and non-warranty repair services on behalf of Nordic ID in the countries they are located in.