Specification Sheet

6505 Gayhart Street, Commerce, CA 90040
TEL [phone] | www.noralighting.com | e-mail: [e-mail]
© 2020 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice.
102020P1
Type
Project
Catalog No.
Notes
PRODUCT IMAGES & DIMENSIONS PRODUCT DESCRIPTION
New construction housing for use where insulation can be kept 3" away from housing. The housing is labeled for use with Nora 6"
line voltage trims and compatible with all LED retrofits.
FEATURES
· Internal thermal protection
· cULus listed for damp location and through branch circuit wiring
· Quick connect provided
· 24-1/2” Bar hangers with captive nails and alignment foot
· Accommodates 1-5/8" maximum ceiling thickness
CONSTRUCTION
Plastic Frame: High quality 0.032 steel die cut one piece frame.
Housing: 0.040 steel housing with riveted cap adjusts to maximum ceiling thickness of 1-5/8". Spring brackets accept torsion wing
trim springs; slots on socket plate accept standard coil springs.
Minimum Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent
building components.
Socket: Galvanized steel socket plate adjusts inside housing for optimum light performance. Contains a single medium base
socket. Protective cap included to protect socket interior during ceiling painting. Socket plate can be removed in the field to
convert to a floating socket.
Bar Hangers: Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Hanger bars have T-Bar slot
and alignment feet. Bar hangers are parallel to junction box, but can be repositioned 90º perpendicular to junction box if desired.
“L” Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allows easy installation in a suspended ceiling.
Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and
snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all
leads. Through branch circuit wiring, (4-in, 4-out).
Quick Connect Feature: Housing contains three UL approved quick connections that allow insertion of 1/4" stripped solid or
tinned standard conductors to be inserted into the connector. Connectors are pre-attached to fixture power, common, and ground
circuits.
Thermal Protector: Standard UL thermal protector rated for 90°C is affixed to inner top surface of housing.
ELECTRICAL
Input Voltage: 120V
Socket: Medium base
Lamp: Lamp type based on trim selection
Wattage: 150W max. (wattage varies based on trim selection)
LABELS AND LISTINGS
· cULus Listed for Damp Location w/ Feed Through (Wet Location when used with designated trims)
· NYC Approved: Calendar #43895
NH-26Q
6" Non-IC Line Voltage New Construction Housing
Source: 150W Max. (Varies by trim)
Example: NH-26Q = 6" Non-IC Line Voltage New Construction Housing, Adjustable Socket Bracket
6" Non-IC Line Voltage New Construction Housing
Housing Type
NH-26Q: 6" Non-IC Line Voltage New Construction Housing, Adjustable Socket Bracket
7-1/2"
7"
10-1/8"
6-3/8"
Ceiling Cut-Out