User's Manual

79
Technical Information
Specifications
Oxygen Saturation Display Ranges:
rSO
2
: 0 to 100%
SpO
2
: 0 to 100%
Pulse Rate Display Range: 18 to 300 beats per minute (BPM)
Sensor Accuracy: For declared accuracy data for compatible sensors, refer to
the sensor Instructions for Use (IFU). Sensor IFUs are
included on the operators manual CD.
Measurement Wavelengths and Output
Power
a
:
Refer to sensor IFU for details. Sensor IFUs are included on
the operator’s manual CD.
Alarm Volume (at 1 m): 15: 75 dBA
8: 61 dBA
Informational Tone Volume (at 1 m): 67 dBA
Memory: 840 hours (operating with 2 channels)
420 hours (operating with 4 channels)
280 hours (operating with 6 channels)
Temperature (X-100M, X-100SP, X-100H):
Operating: -5 ºC to 40 ºC (23 ºF to 104 ºF)
Low Exposure -5 ºC (23 ºF)
Storage/Transportation: -30 ºC to 70 ºC (-22 ºF to 158 ºF)
Humidity (X-100M, X-100SP, X-100H):
Operating: 10% to 93% noncondensing
Storage/Transportation: Up to 93% noncondensing
Altitude (X-100M, X-100SP, X-100H):
Operating: Up to 4,000 meters (13,124 feet)
Power Requirements (Mains): 100–240 VAC 50–60 Hz
Internal Power:
Battery: 7.2 volt Li-ion battery pack, 2.4 Ah when charged
Operating Life (fully charged battery): 1 hour minimum (with four connected signal processors and
sensors and a screen that is at the default brightness)
Storage Life: 20 days minimum
Recharge Time to 90% Capacity: 2.5 hours maximum
a. This information is especially useful for clinicians performing photodynamic therapy.
DRAFT 10 DEC 2012
DRAFT 10 DEC 2012

Summary of content (2 pages)