Instructions / Assembly

MODEL: 60503

ASSEMBLY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

READ INSTRUCTIONS ALL THE WAY THROUGH

PRIOR TO ASSEMBLY.

Assembly Time: 10 Minutes.

UNPACK THE SOLAR LED LIGHT STRING

The following parts should be included in your

solar light kits; (5) Solar LED Lights, (1) Solar

panel, (1) Adjustable bracket and stake set, (1)

Countersink Spade Bit.

TOOLS

A drill will be required for deck or hard surface

installation.

3.) Slide the LED light body through the

bottom of your deck.

4.) Once through the hole, screw the lens to the

body.

5.) Drop in place.

DECK INSTALLATION

GROUND INSTALLATION

Bury the Solar LED Light String bodies in grass,

mulch, or gravel. You may wish to create a small

trench between lights in order to conceal the

cable.

TIP:

Use your drill and the included spade bit for

greater precision.

1.) Using your drill with the included spade bit,

carefully drill through your deck, keep drilling

until the flag touches the deck's surface.

2.) Remove the lens from the body.

PAGE 1
60503 ASSEMBLY INSTRUCTIONS MODEL: READ AND SAVE THESE INSTRUCTIONS 3.) Slide the LED light body through the bottom of your deck. READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY. Assembly Time: 10 Minutes. UNPACK THE SOLAR LED LIGHT STRING The following parts should be included in your solar light kits; (5) Solar LED Lights, (1) Solar panel, (1) Adjustable bracket and stake set, (1) Countersink Spade Bit. TOOLS A drill will be required for deck or hard surface installation.
PAGE 2
60503 ASSEMBLY INSTRUCTIONS MODEL: READ AND SAVE THESE INSTRUCTIONS 3.) Join the connectors and screw the cap tightly together. PANEL ASSEMBLY AND INSTALLATION 1.) Push tube and stake together as shown below. 4.) Insert the solar panel into the ground in a sunny area. 2.) Attach bracket to back of the solar panel.
PAGE 3
60503 ASSEMBLY INSTRUCTIONS MODEL: READ AND SAVE THESE INSTRUCTIONS SETTING THE TIME DURATION 1.) Press the timer button & watch for the number of flashes from the led light. The number of flashes indicates the number of hours that the light will stay on, on the last flash, the light will stay on and remain on for 1 hour per flash (4, 5, or 6 hours). 2.) The timer will remember what was set last and automatically come on at dusk until the timer is reset. 3.