Instruction Manual
Before mounting, ensure that the area is clear.
1. Attach the suction cups to the back of the submersible puck.
2. Press the puck with the attached suction cup to the surface.
3. Hold the puck in place until the suction cups are attached and secured to the area.
Instruction Manual
Retain carton for storage purposes
SUBMERSIBLE COLOR CHANGING PUCK LIGHT
Submersible Color Changing Puck Light
Installation Guide
model no. 052-6136-8 | contact us 1-866-827-4985
Operating Instructions
1. Power On: Rotate the back of the puck light to reveal the battery compartment. Place 3x AA batteries in the battery
compartment. Align and rotate the back of the puck light to secure the batteries in place.
2. Remote: Remove the battery pull tab to operate.
To change the battery, locate the battery compartment on the narrow side of the remote.
• Insert CR2025 battery.
• Place the battery compartment back in the remote control so it locks in place.
Operation:
1. Turn on puck light by pressing the On button on the remote.
2. Select the desired color or the desired eect by pushing the corresponding button on the remote.
3. Press the O button to turn o the puck light.
SPECIFICATIONS
• Outdoor and Indoor Use
• Color changing with remote
• 10 RGB LED’s
• Dimmable
• 4 Party Modes: Flash, Strobe, Fed and Smooth
• Operated by 3x AA batteries (not included)
Remote control operations:
• On/O buttons
• 1x CR2025 Battery (included)
IMPORTANT: Please read this manual carefully
before assembly and save it for reference.