User's Manual

GETTING STARTED
Remove all components from the package. Items in the pack
include: – Bluetooth stereo transmitter, User Guide. Please
check the contents carefully and contact your local dealer
immediately if there are any shortages.
GETTING TO KNOW YOUR TX
This Bluetooth Stereo transmitter (TX) offers the latest innovation
in Bluetooth technology. It can transfer stereo audio from music
or audio players such as MP3 players or Apple iPod to Bluetooth
stereo headset/receiver wirelessly and freely. As a kind of easy
control product, TX will finish Searching, Pairing, and connecting
by itself automatically. Users just need to power on TX to start the
operation.
CHARGING THE TX
Before using the TX, you must charge it for approximately two
hours. After fully charged, the battery provides up to 6 hours of
music transfer time.
To Charge the TX
1. Plug the USB charging cable into TX mini USB holder.
2. Plug the other side of the USB charging cable into a
powered USB holder. When charging, the LED will be
lighted
3. Unplug the USB charging cable from Tx when charging
finished, the LED will turn off
PAIR TX TO YOUR BLUETOOTH STEREO HEADSET/ AUDIO
RECEIVER
Pairing is the process of linking the TX with your Bluetooth
stereo headset/receiver. Before you using the Tx with
Bluetooth stereo headset/ audio receiver, you should pair both
devices. After pairing completed, you can use the Tx only with
the paired Bluetooth stereo headset/ audio receiver. If you
wish to use the Tx with a different Bluetooth stereo headset/
audio receiver, you need to redo the pairing process with the
new devices. In this case, the Tx will no longer work with the
previous Bluetooth stereo headset/ audio receiver. Before you
commence pairing the Tx, ensure that the battery is fully
charged.
To pair the Bluetooth receiver device
1. With the Tx turned off, turn on the Tx, the Blue LED will
flash in fast speed. Now the Tx is in pairing mode.
2. Turn on the Bluetooth stereo headset/ audio receiver
and place it within 10 feet to the Tx
3. Place the Bluetooth stereo headset/ audio receiver into
pairing mode. Refer to the Bluetooth stereo headset/
audio receiver user guide for instructions for this feature.
4. If you want to pair with another device, you should
turned off the paired device first, and follow the step 2
and 3 to let the new device into paring mode. Tx will try
to pair with the new device after it gets the power off
indication from the last paired device.
Tips
: Please make sure the PIN code of Bluetooth stereo
headset/ audio receiver is 0000. Otherwise, Tx will not pair
with it. For this part, please refer to your Bluetooth Stereo
headset/ audio receiver venders.
If disconnection or lost link occurs, it maybe due to the
following reason
a) The range is over 10 feet between both Bluetooth stereo
headset/ audio receiver and the Bluetooth Tx.
b) Bluetooth stereo headset/ audio receiver disconnected
the link for some certain conditions.
c) Either device has been switched off.
Note: The Tx, in normal operation, should maintain the
connection with the Bluetooth stereo headset/ audio receiver
at all times once the pairing mode and connection has been
established between the two devices.
POWERING YOUR TX
As a so-called easy control device, power on/off Tx is the only
operation for Tx, and all the needed operation will be done by
Tx itself automatically.
To turn on your Tx - Move the Power button to “On”, the
blue LED will be in flashing to indicate Tx turned on.
To turn off your Tx
- Move the power button to “Off”, the blue
LED will be off.
Note: If any thing unexpected happened, and the music can’t
transfer out from Tx, user should restart the Tx (by power off
and power on).
USING TX TO TRANSFER MUSIC
1. With the Tx turned on, plug your Tx into the audio jack.
2. Place your stereo headset/ audio receiver within 10
feet to Tx.
3. With the Bluetooth stereo headset/ audio receiver
paired with Tx, turn on the paired Bluetooth stereo
headset/ audio receiver. The Tx will connect to your
Bluetooth Wireless
Stereo Transmitter
Tx
P/N NSTX3C2XXX
USER GUIDE
Declaration of Conformity. We declare that product
NSTX3C2XXX conforms to the R&TTE Directive
1999/5/RC.
FCC ID: