User Manual

ManualsBrandsNolan Systems ManualsElectronicsGPS Compass - GuideMate

Introduction

The NolaN GuideMate is compact, easy to carry, hand-held GPS

receiver with e-compass. It provides the high sensitivity for

personal navigation, allowing you to navigate the POI (point of

interest) anytime you want. And when navigating, it can provide

current position, direction, real time, speed, distance to

destination, and more trip information. It can also save your

track log, you can see it on the map using our PC application.

Getting Started

Remove all components from the package. Items in the pack

include: GuideMate, USB data cable, CD-ROM and this User

Guide. Please check the contents carefully and contact your local

dealer immediately if anything is missing or damaged.

Getting to Know Your GuideMate

Please note some models of GuideMate will differ slightly in

style, colour and the functionality may vary according to their

specifications. For up-to-date information check the support

section of the NolaN web site: www.nolan-sys.com

Buttons Description

➊ Power On/OFF

y Slide the switch to turn the unit on /off.

➋ NEXT

y Press to view next page or setting menu.

y Press to return to previous page or setting menu.

y Press to clear stopwatch.

➌ SELECT

y Press to select Roam or nav. mode of the main page.

y Press to scroll through info pages.

y Press to start/stop the stopwatch.

y Press to highlight options.

y Press and hold to enter sub-menu pages.

y Press and hold to select options.

➍ USB Connector Port

y Provides interface to a PC for data transfer.

View the Pages

Information you need for basic navigation using the GuideMate

is provided by the Main Page. To view these pages, press NEXT

button repeatedly to cycle from one to another.

Main Page - Provides guidance to a destination.

Trip Info Page - Display trip and navigation data.

Stopwatch Page - Provide stopwatch to start the timer.

Destination Page - Provides destination selection, mark the

location and track log information

Destination Information Page - Display the destination

information.

Setting Page - A directory of settings.

➊ Install the Batteries

The GuideMate operates on two AAA batteries, which are

installed at the back of the unit and should last about 22 hours in

normal mode. Please make sure calibrate e-compass first after

you change the batteries.

GuideMate

Quick Start Guide

Main Page

Trip Info

Stopwatch

Destination

Setting

➌

➋

➍

➊

Dest. Info

Summary of content (3 pages)

PAGE 1
Getting Started Remove all components from the package. Items in the pack include: GuideMate, USB data cable, CD-ROM and this User Guide. Please check the contents carefully and contact your local dealer immediately if anything is missing or damaged. ➊ GuideMate ➍ Quick Start Guide ➋ ➌ View the Pages Getting to Know Your GuideMate Information you need for basic navigation using the GuideMate is provided by the Main Page. To view these pages, press NEXT button repeatedly to cycle from one to another.
PAGE 2
1. 2. 3. To remove the battery cover from the back of the unit, turn it over and pull the cover away. Insert the batteries, observing the proper polarity. Reinstall the battery cover by inserting the bottom slot. ➋ Turn on the GuideMate Viewing Tracking Log 1. 2. 3. Press NEXT button to the destination page. Press SELECT button to select Log tracking. Then press and hold SELECT button to enter the subdirectory. Press SELECT button to enter the setting page.
PAGE 3
Note Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.