Nokia Bluetooth Headset BH-118 User Guide Issue 1.
Contents Introduction About your headset About Bluetooth connectivity 3 3 3 Get started Keys and parts Charge the battery Switch the headset on or off Pair and connect the headset to your phone Switch the voice guidance off Wear the headset 4 4 4 5 Make calls Make and receive calls Change the volume Pair and connect the headset to two phones Handle calls from two phones 7 7 8 Settings Clear device pairings 9 9 Product and safety information 9 5 6 6 8 8
Introduction About your headset With the Nokia Bluetooth Headset BH-118, you can make and receive calls while on the move. Read this user guide carefully before using the product. Also, read the user guide for the device that you connect to the product. Warning: This product may contain small parts. Keep them out of the reach of small children. The surface of this product is nickel-free.
Get started Keys and parts 1 2 3 4 5 6 7 Earpiece Microphone Earpiece holder Multifunction key Clip Charger connector Indicator light Parts of the product are magnetic. Metallic materials may be attracted to the product. Do not place credit cards or other magnetic storage media near the product, because info stored on them may be erased. Charge the battery Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model.
2 3 Connect the charger cable to the charger connector on the headset. The red indicator light turns green when the battery is fully charged. Charging the battery fully may take up to 2 hours. Disconnect the charger from the headset, then unplug from the wall outlet. The fully charged battery has power for up to 6 hours of talk time or up to 120 hours of standby time. When the battery charge is low, you hear a voice prompt, the headset beeps every 5 minutes, and the red indicator light flashes.
4 5 6 The headset switches to pairing mode, and a green indicator light starts to flash quickly. Within 3 minutes, switch Bluetooth on in your phone, then set it to search for Bluetooth devices. For details, see the user guide of your phone. Select the headset from the list of found devices. If needed, type in the passcode 0000. You can pair your headset with 8 compatible phones, but you can only connect it to a maximum of 2 phones at the same time.
To have the earpiece within easy reach when not using the headset, keep the earpiece in the holder. Make calls Make and receive calls To make and receive calls using your headset, you need to connect it to your phone. Make a call Make a call in the normal way. Answer or end a call Press . Reject a call twice. Press Switch a call from your headset to a compatible phone for 2 seconds, or switch the headset off.
Redial the last called number twice. Press Use voice dialling for 2 seconds, then follow the instructions in the user guide of your Press and hold phone. Change the volume Set the desired volume level on your connected phone. The selected volume level is saved as the minimum volume level for the phone that is currently connected to the headset. Pair and connect the headset to two phones When you use the headset for the first time, it automatically connects to your phone.
Settings Clear device pairings for 5 seconds. 1 To switch the headset off, press and hold 2 Press and hold for 9 seconds. The headset beeps twice, and the red and green indicator lights alternate. After the pairings are cleared, the headset enters pairing mode. Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device.
• Do not attempt to open the device. • Unauthorised modifications may damage the device and violate regulations governing radio devices. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics. • Only use a soft, clean, dry cloth to clean the surface of the device. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points.
/Issue 1.
