Nokia Bluetooth Stereo Headset BH-111 Issue 1.
Introduction About your headset With the Nokia Bluetooth Stereo Headset BH-111, you can handle calls hands-free and enjoy your favourite music on the go. The headset is easy to pair with compatible devices, and you can switch smoothly between music and calls. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
Check with the manufacturers of other devices to determine their compatibility with this device. Get started Keys and parts 1 2 3 4 5 6 7 8 9 Charger connector Volume knob and indicator light Microphone Rewind key Multifunction key Fast-forward key Play/Pause key Audio connector (3.5 mm) Clip Charge the battery Before using the headset, you must charge the battery. When you unplug a charger, hold and pull the plug, not the cord. 1 2 3 Connect the charger to a wall outlet.
Check the battery charge With your headset connected to your mobile device, press . A green light indicates a sufficient charge level. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery. Switch the headset on Press and hold for 2 seconds. The headset beeps, and a green indicator light flashes once. The headset automatically connects to the last connected device.
You can pair the headset with up to 8 devices, but connect it to only one device supporting the HFP profile and another device supporting the A2DP profile at a time. When you switch on your headset, it automatically connects to the last used device. To for 2 seconds. manually connect the headset to the last used device, press and hold To manually connect the headset to a device that supports the A2DP profile, press . Wear the headset Connect the headphones to the audio connector.
Decline a call twice. Press Mute or unmute the microphone Press . You can redial the number you last called or make a call using voice dialling, if your mobile device supports these features with the headset. Redial the last called number When no call is in progress, press twice. Activate voice dialling When no call is in progress, press and hold in the user guide of your mobile device.
Play the next song Press . Play the previous song twice. Press Start the current song from the beginning Press . Scroll through the current song quickly or . Press and hold Stop playing Press and hold . Change the volume Use the volume knob. If supported, you can also change the headset volume on the connected A2DP device. Settings Switch the indicator lights off You can switch the indicator lights off if you do not want them to be shown, for example, during a call.
Troubleshooting Cannot connect the headset to a compatible device? Make sure that the headset is charged, switched on, and paired with the device. Did the headset stop functioning even though it is charged? Plug the charger into a wall , connect the headset to the charger. outlet, and while you press and hold Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery.
• • • • • Do not attempt to open the device. Unauthorised modifications may damage the device and violate regulations governing radio devices. Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics. Only use a soft, clean, dry cloth to clean the surface of the device. Do not paint the device. Paint can clog the moving parts and prevent proper operation.
/Issue 1.
