Nokia Bluetooth Headset BH-109 Issue 1.
Introduction About your headset With Nokia Bluetooth Headset BH-109, you can handle calls hands-free, even when you are using two mobile devices at the same time. For support, go to www.nokia.com/support. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following profiles: Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.
Charge the battery Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard. When you unplug a charger, hold and pull the plug, not the cord. 1 2 3 Connect the charger to a wall outlet. Connect the charger cable to the charger connector in the headset.
2 3 4 5 If you have never paired the headset with a device, or you have emptied the paired devices list, switch the headset on. If you have previously paired your headset with another device, press and hold the power key for 5 seconds. The headset enters pairing mode, and the green indicator light starts to flash quickly. Within 3 minutes, activate Bluetooth on the device, and set it to search for Bluetooth devices. For details, see the user guide of the device.
Make calls Make and receive calls Make a call When the headset is connected to your compatible mobile device, make a call normally using your mobile device. Answer or end a call Press the call key. Reject a call Press the call key twice. Switch a call between your headset and mobile device During a call, press the call key for 2 seconds. You can redial the number you last called or make a call by using your voice, if your mobile device supports these features with the headset.
End the call and answer the other one Press the call key. Pair and connect the headset to two devices You can connect your headset to two devices, for example, when you want to make calls using both your personal and your work mobile device. Switch on the headset, activate pairing mode, and pair the headset with the first device. Switch off the headset, activate pairing mode, and pair it with the second device. To connect the headset to the two devices, switch the headset off and back on.
If you want to redial or use voice dialling, the call is made on the device you last used with the headset. Settings Switch the lights off You can switch the indicator lights off if you do not want them to be shown, for example, during a call. When the headset is connected to a device, press and hold the call key and the volume down key for 5 seconds. The yellow indicator light flashes once. Some indication lights may still be shown, for example, when the battery charge is low.
If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator light is displayed. When your charger is not in use, unplug it from the electrical plug and the device.
Copyright and other notices DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-109 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. © 2010 Nokia. All rights reserved. Nokia, Nokia Connecting People, and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation.
