7368 ISAM CPE A-020W-A Product Guide Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of their respective owners. The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein. © 2018 Nokia.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Preface 1 Preface This preface provides general information about the documentation set for CPEs. 1.1 Scope This documentation set provides information about safety, features and functionality, ordering, hardware installation and maintenance, and software installation procedures for the current release. 1.
Release 05.08.01 | June 2018 | Edition 01 Preface 7368 ISAM CPE A-020W-A Product Guide 1.6 Nokia quality processes Nokia’s CPE quality practices are in compliance with TL 9000 requirements. These requirements are documented in the Fixed Networks Quality Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and customer end-point requirements are met.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 2 Preface To access individual documents Individual PDFs of customer documents are also accessible through the Nokia Customer Support website. 1.9 1 Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you are a new user and require access to this service, please contact your Nokia sales representative. 2 From the Technical Content for drop-down menu, choose the product.
Release 05.08.01 | June 2018 | Edition 01 Preface 7368 ISAM CPE A-020W-A Product Guide 1.9.1 Procedures with options or substeps When there are options in a procedure, they are identified by letters. When there are required substeps in a procedure, they are identified by roman numerals. Procedure 3 Example of options in a procedure At step 1, you can choose option a or b. At step 2, you must do what the step indicates. 1 2 Procedure 4 This step offers two options.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 1.10 Preface Multiple PDF document search You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single display panel. The results are grouped by PDF file, and you can expand the entry for each file. Note — The PDF files in which you search must be in the same folder.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Table of contents Issue: 01 1 Preface.............................................................................................9 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.9.1 1.10 Scope ..........................................................................................................9 Audience......................................................................................................9 Required knowledge...
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 4 5 A-020W-A unit data sheet ............................................................23 5.1 5.2 5.2.1 5.2.2 5.2.3 5.3 5.4 5.4.1 5.5 5.6 5.7 5.8 5.9 5.9.1 5.9.1.1 5.9.1.2 5.9.2 A-020W-A part numbers and identification................................................23 A-020W-A general description...................................................................24 TR-069 object support for WiFi parameters ................
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide List of figures Issue: 01 2 ANSI safety guidelines ...................................................................9 Figure 1 A-020W-A sample safety label ..................................................................11 3 ETSI safety guidelines..................................................................15 Figure 2 A-020W-A sample safety label ................................................................
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 36 Figure 37 Figure 38 Figure 39 Figure 40 Figure 41 Figure 42 Figure 43 Figure 44 Figure 45 Figure 46 Figure 47 Figure 48 6 Port Triggering window..............................................................................84 DDNS window ...........................................................................................86 NTP window .............................................................................
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide List of tables Issue: 01 2 ANSI safety guidelines ...................................................................9 Table 1 Table 2 Safety labels ..............................................................................................10 Responsible party contact information ......................................................11 3 ETSI safety guidelines...........................................................
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide ANSI safety guidelines 2 ANSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of A-020W-A CPE equipment in the North American or ANSI market. 2.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the equipment. 2.1.
Release 05.08.01 | June 2018 | Edition 01 ANSI safety guidelines 7368 ISAM CPE A-020W-A Product Guide The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 1 2.2 ANSI safety guidelines A-020W-A sample safety label Safety standards compliance This section describes the A-020W-A CPE compliance with North American safety standards. The A-020W-A is compliant with CE, FCC, CB and ETL requirements. Warning — Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.2.
Release 05.08.01 | June 2018 | Edition 01 ANSI safety guidelines 2.2.2 7368 ISAM CPE A-020W-A Product Guide Energy-related products standby and off modes compliance Hereby, Nokia declares that the A-020W-A CPE devices are in compliance with the essential requirements and other relevant provisions of Directive 2009/125/EC together with Commission Regulation (EC) No 1275/2008 and Commission Regulation (EC) No 801/2013. The A-020W-A CPE devices qualify as high network availability (HiNA) equipment.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 2.2.4 ANSI safety guidelines FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
Release 05.08.01 | June 2018 | Edition 01 ANSI safety guidelines 2.3.1 7368 ISAM CPE A-020W-A Product Guide Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use greatly increases the danger of damage to equipment or property. 2.3.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide ETSI safety guidelines 3 ETSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of A-020W-A CPE equipment. 3.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the equipment. 3.1.
Release 05.08.01 | June 2018 | Edition 01 ETSI safety guidelines 7368 ISAM CPE A-020W-A Product Guide The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 2 3.2 ETSI safety guidelines A-020W-A sample safety label Safety standards compliance This section describes the device compliance with European safety standards. Warning — Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3.2.1 Responsible party Table 4 lists the party in the US responsible for this device.
Release 05.08.01 | June 2018 | Edition 01 ETSI safety guidelines 3.2.2 7368 ISAM CPE A-020W-A Product Guide Energy-related products standby and off modes compliance Hereby, Nokia declares that the A-020W-A CPE devices are in compliance with the essential requirements and other relevant provisions of Directive 2009/125/EC together with Commission Regulation (EC) No 1275/2008 and Commission Regulation (EC) No 801/2013. The A-020W-A CPE devices qualify as high network availability (HiNA) equipment.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 3.2.5 ETSI safety guidelines Environmental standard compliance The A-020W-A CPE equipment complies with the following EN 300 019 European environmental standards: • ETS 300 019-2-1 Storage Class T1.1 • ETS 300 019-2-2 Transport Class T2.3 • ETS 300 019-2-3 Stationary Class T3.1E 3.2.6 Resistibility requirements compliance The A-020W-A CPE equipment complies with the requirements of ITU Recommendation K.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide ETSI environmental guidelines 4 ETSI environmental guidelines This chapter provides information about the ETSI environmental regulations that govern the installation and operation of A-020W-A CPE equipment. This chapter also includes environmental operation parameters of general interest.
Release 05.08.01 | June 2018 | Edition 01 ETSI environmental guidelines 4.1.3 7368 ISAM CPE A-020W-A Product Guide End-of-life collection and treatment Electronic products bearing or referencing the symbol shown in Figure 3, when put on the market within the European Union (EU), shall be collected and treated at the end of their useful life, in compliance with applicable EU and local legislation. They shall not be disposed of as part of unsorted municipal waste.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide A-020W-A unit data sheet 5 A-020W-A unit data sheet 5.1 A-020W-A part numbers and identification 5.2 A-020W-A general description 5.3 A-020W-A software and installation feature support 5.4 A-020W-A interfaces and interface capacity 5.5 A-020W-A LEDs 5.6 A-020W-A detailed specifications 5.7 A-020W-A functional blocks 5.8 A-020W-A standards compliance 5.9 A-020W-A special considerations 5.
Release 05.08.01 | June 2018 | Edition 01 A-020W-A unit data sheet 7368 ISAM CPE A-020W-A Product Guide Ordering part number Provisioning number Description CLEC CPR ECI/ Bar code 3FE 47471 CA 3FE 47511 BA CPE with Wi-Fi Access Point and range extender, 2 Gigabit Ethernet UNI, dual bands 802.11ac 2x2 and 802.11n 2x2 WiFi; 12V/1A AC/DC UK plug, 3-pin external power supply variant. The following accessories are included: — — — — — — • • • 3FE 47471 DA 3FE 47511 DA CA_RJ45: 1 1.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 4 A-020W-A unit data sheet A-020W-A CPE POWER INTERNET WPS PAIR RESET 28229 A-020W-A CPEs provide the following functions: • • • • • • • • • • • • • • • • • • • Issue: 01 GE Ethernet uplink Concurrent 802.11n 2x2 MIMO in 2.4GHz and 802.
Release 05.08.01 | June 2018 | Edition 01 A-020W-A unit data sheet • • • • • • • • • • 5.2.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 5.3 A-020W-A unit data sheet A-020W-A software and installation feature support For information on installing or replacing the A-020W-A CPE, see: • Install a A-020W-A • Replace a A-020W-A 5.4 A-020W-A interfaces and interface capacity Table 6 describes the supported interfaces and interface capacity for A-020W-A CPE devices.
Release 05.08.01 | June 2018 | Edition 01 A-020W-A unit data sheet 7368 ISAM CPE A-020W-A Product Guide Figure 5 A-020W-A physical connections LAN 1 LAN 2 WAN ON/OFF 28230 Table 7 describes the physical connections for A-020W-A CPE devices. Table 7 5.5 A-020W-A physical connections Connection Description On/Off button This button powers the unit on or off. LAN 1/LAN 2 This connection is provided through Ethernet RJ-45 connectors.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 6 A-020W-A unit data sheet A-020W-A LEDs POWER INTERNET WPS PAIR RESET 28229 Table 8 provides LED descriptions for the A-020W-A CPE.
Release 05.08.01 | June 2018 | Edition 01 A-020W-A unit data sheet 5.6 7368 ISAM CPE A-020W-A Product Guide A-020W-A detailed specifications Table 9 lists the physical specifications for the A-020W-A CPE. Table 9 A-020W-A physical specifications Description Specification Width 42.2 mm (1.66 in.) Height 123.22 mm (4.85 in.) Depth 112.64 mm (4.43 in.) Weight [within ± 0.5 lb (0.23 kg)] 230g (0.5 lb) Table 10 lists the power consumption specifications for the A-020W-A CPE.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 7 A-020W-A unit data sheet Single-residence WiFi CPE with Gigabit Ethernet DDR3 Flash DDR3 Clock UART EEPROM PBI I2C GE PHY LEDs GPIO RJ-45 Power Regulators 1.6V 1.1V WiFi SoC GE PHY Chain 0 RJ-45 3.3V 1.5V 1.0V GPIO PCIe 0 SoC GE PHY LEDs 12V Power In RJ-45 Chain 1 Chain 2 Chain 3 2.4G WIFI PA & LNA Circuit 5G WIFI PA Circuit 5G WIFI PA Circuit 2.
Release 05.08.01 | June 2018 | Edition 01 A-020W-A unit data sheet 5.9.1 7368 ISAM CPE A-020W-A Product Guide WiFi service A-020W-A CPE devices feature WiFi service as well as data services. WiFi is a wireless networking technology that uses radio waves to provide wireless HSI and network connections. This device complies with the IEEE 802.11 standards, which the WiFi Alliance defines as the basis for WiFi technology. 5.9.1.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Install a A-020W-A 6 Install a A-020W-A 6.1 Purpose 6.2 General 6.3 Prerequisites 6.4 Recommended tools 6.5 Safety information 6.6 Procedure 6.1 Purpose This chapter provides the steps to install a A-020W-A CPE. 6.2 General The steps listed in this chapter describe mounting and cabling for a A-020W-A CPE. 6.3 Prerequisites You need the following items before beginning the installation: • all required cables 6.
Release 05.08.01 | June 2018 | Edition 01 Install a A-020W-A 6.5 7368 ISAM CPE A-020W-A Product Guide Safety information Read the following safety information before installing the unit. Danger 1 — Hazardous electrical voltages and currents can cause serious physical harm or death. Always use insulated tools and follow proper safety precautions when connecting or disconnecting power circuits.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 6.6 Install a A-020W-A Procedure Use this procedure to install a A-020W-A CPE. 1 Place the unit on a flat surface, such as a desk or shelf. Note — The A-020W-A CPE cannot be stacked with another A-020W-A or with other equipment.
Release 05.08.01 | June 2018 | Edition 01 Install a A-020W-A 7368 ISAM CPE A-020W-A Product Guide 5 Connect the power cable to the power connector. Note — Observe the following: • Units must be powered by a Listed or CE approved and marked limited power source power supply with a minimum output rate of 12 V dc, 1 A. The polarity of the power adapter plug must match the A-020W-A CPE. 6 Power up the unit by using the On/Off power switch. 7 Verify the LEDs and voltage status.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Replace a A-020W-A 7 Replace a A-020W-A 7.1 Purpose 7.2 General 7.3 Prerequisites 7.4 Recommended tools 7.5 Safety information 7.6 Procedure 7.1 Purpose This chapter provides the steps to replace a A-020W-A CPE. 7.2 General The steps listed in this chapter describe mounting and cabling for a A-020W-A CPE. 7.3 Prerequisites You need the following items before beginning the installation: • all required cables 7.
Release 05.08.01 | June 2018 | Edition 01 Replace a A-020W-A 7.5 7368 ISAM CPE A-020W-A Product Guide Safety information Read the following safety information before replacing the unit. Danger 1 — Hazardous electrical voltages and currents can cause serious physical harm or death. Always use insulated tools and follow proper safety precautions when connecting or disconnecting power circuits.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 7.6 Replace a A-020W-A Procedure Use this procedure to replace a A-020W-A CPE. 1 Power down the unit by using the on/off power switch. See Figure 9 for the connections on the A-020W-A CPE. Figure 9 A-020W-A connections LAN 1 LAN 2 WAN ON/OFF 28230 Issue: 01 2 Disconnect the WAN, Ethernet, and power cables from the A-020W-A CPE; see Figure 9 for the connector locations on the A-020W-A.
Release 05.08.01 | June 2018 | Edition 01 Replace a A-020W-A 7368 ISAM CPE A-020W-A Product Guide 6 Connect the power cable to the power connector. Note — Observe the following: • Units must be powered by a Listed or CE approved and marked limited power source with a minimum output rate of 12 V dc, 1 A. The polarity of the power adapter plug must match the A-020W-A CPE. 7 Power up the unit by using the On/Off power button. 8 Verify the LEDs and voltage status. 9 Activate and test the services.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A 8 Configure a A-020W-A 8.1 GUI configuration 8.1 GUI configuration Use the procedures below to use the web-based GUI for the A-020W-A CPE. The A-020W-A CPE is used as an Ethernet gateway to connect devices in the home to the Internet. The GUI provides a variety of features for the home network including routing and firewall capability.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide Figure 10 Web login window Caution — If you forget the current username and password, press the reset button for 10s and the default values for the username and password will be recovered at startup. Pressing the Reset button for less than 10 seconds reboots the A-020W-A CPE; pressing the Reset button for 10 seconds resets the A-020W-A to the factory defaults. 3 Click Login.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A • home networking information • statistics Procedure 7 Device information retrieval 1 Select Status > Device Information from the top-level menu in the Ethernet Gateway window, as shown in Figure 11. Figure 11 Device Information window Table 12 describes the fields in the Device Information window.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide Field Description Device Running Time Amount of time the device has run since last reset in hours, minutes, and seconds (2 of 2) 44 2 Click Refresh to update the displayed information. 3 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 8 Configure a A-020W-A LAN status retrieval 1 Select Status > LAN Status from the top-level menu in the Ethernet Gateway window, as shown in Figure 12. Figure 12 LAN status window Table 13 describes the fields in the LAN status window.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 9 Configure a A-020W-A WAN status retrieval 1 Select Status > WAN Status from the top-level menu in the Ethernet Gateway window, as shown in Figure 13. Figure 13 WAN Status window Table 14 describes the fields in the WAN Status window. Table 14 WAN Status parameters Field Description WAN connection list Drop-down menu listing all WAN connections.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 10 Configure a A-020W-A WAN status IPv6 retrieval 1 Select Status > WAN Status IPv6 from the top-level menu in the Ethernet Gateway window, as shown in Figure 14. Figure 14 WAN Status IPv6 window Table 15 describes the fields in the WAN status IPv6 window. Table 15 WAN status IPv6 parameters Field Description WAN connection list Drop-down menu listing all WAN connections.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 11 Configure a A-020W-A Home networking information retrieval 1 Select Status > Home Networking from the top-level menu in the Ethernet Gateway window, as shown in Figure 15. Figure 15 Home Networking information window Table 16 describes the fields in the Home Networking window.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide Field Description Network Name Name of the wireless network access point Access Point Hexadecimal address of the wireless access point Local Devices Table entry Each entry indicates the status (active or inactive), connection type, device name, IP address, hardware address, and IP address allocation of each connected local device.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 16 Configure a A-020W-A Statistics window (LAN port statistics shown) 2 Click Refresh to update the displayed information. 3 STOP. This procedure is complete. 8.1.3 Network configuration The A-020W-A CPE also supports network configuration, including: • • • • • • • • Issue: 01 LAN LAN IPv6 WAN WAN DHCP Wireless 2.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide • TR-069 • QoS Configuration Procedure 13 LAN configuration 1 Select Network > LAN from the top-level menu in the Ethernet Gateway window, as shown in Figure 17. Figure 17 LAN settings window Table 17 describes the fields in the LAN window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A Field Description DHCP End IP Address Ending DHCP IP address DHCP Lease Time DHCP lease time (in min) Primary DNS Primary domain name server address Secondary DNS Secondary domain name server address Static DHCP MAC Address Hexadecimal MAC address to associate to the LAN Static DHCP IP Address IP address to associate to the bound MAC address (2 of 2) Issue: 01 2 Configure the LAN.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 14 7368 ISAM CPE A-020W-A Product Guide LAN IPv6 networking configuration 1 Select Network > LAN_IPv6 from the top-level menu in the Ethernet Gateway window, as shown in Figure 18. Figure 18 LAN IPv6 network window Table 18 describes the fields in the LAN IPv6 network window. Table 18 LAN IPv6 network parameters Field Description DNS Server Choose a DNS server from the drop-down menu.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A Field Description DHCP Start IP Address Enter the starting DHCP IP address. DHCP End IP Address Enter the ending DHCP IP address. Whether the address info through DCHP Select this check box to enable address information retrieval through DHCP. Whether other info obtained through DHCP Select this check box to enable retrieval of other information through DHCP.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 15 7368 ISAM CPE A-020W-A Product Guide WAN networking configuration 1 Select Network > WAN from the top-level menu in the Ethernet Gateway window, as shown in Figure 19. Figure 19 WAN window Table 19 describes the fields in the WAN window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A Field Description VLAN PRI Enter the VLAN PRI WAN IP Mode Choose an IP mode from the drop-down menu Manual DNS Enter a DNS (2 of 2) 2 Configure a specific WAN connection. 3 Click Save. 4 STOP. This procedure is complete. Procedure 16 WAN DHCP configuration 1 Select Network > WAN DHCP from the top-level menu in the Ethernet Gateway window, as shown in Figure 20.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 17 Configure a A-020W-A Wireless (2.4GHz) networking configuration 1 Select Network > Wireless (2.4GHz) from the top-level menu in the Ethernet Gateway window, as shown in Figure 21. Figure 21 Wireless (2.4GHz) network window Table 21 describes the fields in the Wireless 2.4GHz network window. Table 21 Wireless 2.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide Field Description Mode Choose a WiFi mode from the drop-down menu: • • • • • auto (b/g/n) b g n b/g Bandwidth Choose 20 MHz or 40 MHz from the drop-down menu.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 4 Click Save. 5 STOP. This procedure is complete. Procedure 18 Wireless (5GHz) networking configuration 1 Select Network > Wireless (5GHz) from the top-level menu in the Ethernet Gateway window, as shown in Figure 22.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide Table 22 describes the fields in the Wireless 5GHz network window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A 2 Configure the Wireless connection. 3 If you have enabled and configured WPS, click WPS connect. 4 Click Save. 5 STOP. This procedure is complete. Procedure 19 Wireless scheduling 1 Select Network > Wireless Schedule from the top-level menu in the Ethernet Gateway window, as shown in Figure 23.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide 5 Choose Everyday or Individual Days from the drop-down menu. 6 If you chose Individual Days, select the check boxes for the desired days. The Recurrence Pattern shows the rules created to date. 7 If desired, click the plus sign (+) to add more rules. 8 Click Save Changes. 9 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A Table 23 describes the fields in the DNS network window. Table 23 Issue: 01 DNS network parameters Field Description DNS Proxy Select this check box to enable DNS proxy Domain Name Domain name IPv4 Address Domain IP address Origin Domain Origin domain name New Domain New domain name 2 Enter the domain name and IP address and click Add.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 21 7368 ISAM CPE A-020W-A Product Guide TR-069 configuration 1 Select Network > TR-069 from the top-level menu in the Ethernet Gateway window, as shown in Figure 25. Figure 25 TR-069 network window Table 24 describes the fields in the TR-069 network window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A 3 Click Save. 4 STOP. This procedure is complete. Procedure 22 QoS configuration 1 Select Network > QoS Config from the top-level menu in the Ethernet Gateway window. Figure 26 shows the window for configuring QoS L2 (Layer 2 packet sizes). Figure 26 QoS Config window (L2) Figure 27 shows the window for configuring QoS L3 (Layer 3 packet sizes).
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide Figure 27 QoS Config window (L3) Table 25 describes the fields in the QoS Config window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Table 25 Configure a A-020W-A QoS Config parameters Field Description Type Choose a QoS service layer type from the drop-down menu, either L2 or L3. Source MAC Enter the source MAC. Select the Exclude check box to exclude the source MAC Interface Choose an interface from the drop-down menu DSCP Remark Enter the value for the DSCP mark (range: 0-63); valid only for L3 Criteria 802.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide • parental control • DMZ and ALG • access control Procedure 23 Firewall configuration 1 Select Security > Firewall from the top-level menu in the Ethernet Gateway window, as shown in Figure 28. Figure 28 Firewall window Firewall security applies only to services provided by the A-020W-A CPE. Internet access from the LAN side is not affected by this firewall.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A Table 26 describes the fields in the firewall window. Table 26 Issue: 01 Firewall parameters Field Description Security level Choose the security level from the drop-down menu: Off, Low, or High Attack Protect (Protection against DoS or DDoS attacks) Choose enable or disable attack protect from the drop-down menu The default is disable 2 Configure the firewall. 3 Click Save. 4 STOP.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 24 7368 ISAM CPE A-020W-A Product Guide MAC filter configuration 1 Select Security > MAC Filter from the top-level menu in the Ethernet Gateway window, as shown in Figure 29. Figure 29 MAC filter window Table 27 describes the fields in the MAC filter window.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 25 7368 ISAM CPE A-020W-A Product Guide IP filter configuration 1 Select Security > IP filter from the top-level menu in the Ethernet Gateway window, as shown in Figure 30. Figure 30 IP filter window Table 28 describes the fields in the IP filter window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A 2 Configure the IP filter. 3 Click Add. 4 STOP. This procedure is complete. Procedure 26 URL filter configuration 1 Select Security > URL Filter from the top-level menu in the Ethernet Gateway window, as shown in Figure 31. Figure 31 URL Filter window Note — You cannot use URL filtering for HTTPS. The URL is encrypted when using HTTPS. Table 29 describes the fields in the URL Filter window.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide Table 29 Field Description Enable URL filter Select the check box to enable the URL filter URL filter type Select the radio button for Exclude URL or Include URL URL Address Enter the URL address Port Enter the port number; the default is 80 2 Configure the URL Filter. 3 Click Add Filter. 4 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A Table 30 describes the fields in the Parental Control window.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 28 7368 ISAM CPE A-020W-A Product Guide DMZ and ALG configuration 1 Select Security > DMZ and ALG from the top-level menu in the Ethernet Gateway window, as shown in Figure 33. Figure 33 DMZ and ALG window Table 31 describes the fields in the DMZ and ALG window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A 5 Click Save DMZ. 6 STOP. This procedure is complete. Procedure 29 Access control configuration This procedure describes how to configure the access control level (ACL). Note 1 — ACL takes precedence over the firewall policy. Note 2 — The trusted network object will be shared for all WAN connections; it is not applied individually to a WAN connection.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 30 Configure a A-020W-A Port forwarding configuration 1 Select Application > Port forwarding from the top-level menu in the Ethernet Gateway window, as shown in Figure 35. Figure 35 Port forwarding window Table 33 describes the fields in the port forwarding window.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide 2 Configure port forwarding. 3 Click Add. 4 STOP. This procedure is complete. Procedure 31 Port triggering 1 Select Application > Port Triggering from the top-level menu in the Ethernet Gateway window, as shown in Figure 36. Figure 36 Port Triggering window Table 33 describes the fields in the Port Triggering window.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 32 7368 ISAM CPE A-020W-A Product Guide DDNS configuration 1 Select Application > DDNS from the top-level menu in the Ethernet Gateway window, as shown in Figure 37. Figure 37 DDNS window Table 35 describes the fields in the DDNS window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 3 Click Save. 4 STOP. This procedure is complete. Procedure 33 NTP configuration 1 Select Application > NTP from the top-level menu in the Ethernet Gateway window, as shown in Figure 38. Figure 38 Issue: 01 Configure a A-020W-A NTP window 2 Select the Enable NTP Service check box. 3 Click Save. 4 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 34 7368 ISAM CPE A-020W-A Product Guide UPnP and DLNA configuration 1 Select Application > UPnP and DLNA from the top-level menu in the Ethernet Gateway window, as shown in Figure 39. Figure 39 UPnP and DLNA window 2 Select the Enable UPnP check box to enable UPnP. 3 Click Save/Apply. 4 STOP. This procedure is complete. 8.1.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 7368 ISAM CPE A-020W-A Product Guide • • 1 the first character cannot be a special character there are not enough character classes Select Maintenance > Password from the top-level menu in the GPON Home Gateway window, as shown in Figure 40. Figure 40 Password window Table 36 describes the fields in the password window.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 36 Configure a A-020W-A Device management 1 Select Maintenance > Device Management from the top-level menu in the Ethernet Gateway window, as shown in Figure 41. Figure 41 Device Management window Table 37 describes the fields in the Device Management window.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 37 7368 ISAM CPE A-020W-A Product Guide Backup and Restore 1 Select Maintenance > Backup and Restore from the top-level menu in the Ethernet Gateway window, as shown in Figure 42. Figure 42 92 Backup and Restore window 2 Click Select File and choose the backup file. 3 Click Import Config File to restore the A-020W-A CPE to the saved backup or click Export Config File to export the current configuration to the backup file.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 38 Upgrade firmware 1 Figure 43 Issue: 01 Configure a A-020W-A Select Maintenance > Firmware Upgrade from the top-level menu in the Ethernet Gateway window, as shown in Figure 43. Firmware Upgrade window 2 Click Select File and choose the new firmware file. 3 Click Upgrade to upgrade the firmware. 4 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 39 7368 ISAM CPE A-020W-A Product Guide Reboot 1 Select Maintenance > Reboot Device from the top-level menu in the Ethernet Gateway window, as shown in Figure 44. Figure 44 94 Reboot Device window 2 Click Reboot to reboot the A-020W-A CPE. 3 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Procedure 40 Restore factory defaults 1 Select Maintenance > Factory Default from the top-level menu in the Ethernet Gateway window, as shown in Figure 45. Figure 45 Issue: 01 Configure a A-020W-A Factory Default window 2 Click Factory Default to reset the A-020W-A CPE to its factory default settings. 3 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A Procedure 41 7368 ISAM CPE A-020W-A Product Guide Diagnose connections 1 Select Maintenance > Diagnostics from the top-level menu in the Ethernet Gateway window, as shown in Figure 46. Figure 46 96 Diagnostics window 2 Choose a WAN connection to diagnose from the drop-down menu. 3 Enter the IP address or domain name. 4 Select the test type: ping, traceroute, or both.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide 9 Click Cancel to cancel the test. 10 STOP. This procedure is complete. Procedure 42 View log files 1 Select Maintenance > Log from the top-level menu in the Ethernet Gateway window, as shown in Figure 47.
Release 05.08.01 | June 2018 | Edition 01 Configure a A-020W-A 3 7368 ISAM CPE A-020W-A Product Guide Choose a reading level from the drop-down menu to determine which types of events to display from the log file: • • • • • • • • Emergency Alert Critical Error Warning Notice Informational Debug 4 The log file is displayed at the bottom of the window. 5 STOP. This procedure is complete. 8.1.
Release 05.08.01 | June 2018 | Edition 01 7368 ISAM CPE A-020W-A Product Guide Figure 48 Configure a A-020W-A RG Troubleshooting Counters window Table 38 describes the fields in the RG Troubleshooting Counters window.
Release 05.08.
Release 05.08.
Release 05.08.01 | June 2018 | Edition 01 Copyright 2018 Nokia.