Nokia FastMile 4G Receiver Product Overview Nokia BBD Release 20.
Nokia FastMile 4G Receiver Product Overview Nokia is committed to diversity and inclusion. We are continuously reviewing our customer documentation and consulting with standards bodies to ensure that terminology is inclusive and aligned with the industry. Our future customer documentation will be updated accordingly. Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of their respective owners.
Nokia FastMile 4G Receiver Product Overview Preface 1 Preface This preface provides general information about the Product Overview for the Nokia FastMile 4G Receiver. 1.1 Summary of document issue changes Changes between document issues are cumulative. Therefore, the latest document issue contains all changes made to previous issues. Issue 01: first issue of the document for this release of the FastMile 4G Receiver 1.
Preface Nokia FastMile 4G Receiver Product Overview 1.7 Nokia quality processes Nokia’s FastMile 4G Receiver quality practices are in compliance with TL 9000 requirements.These requirements are documented in the Fixed Networks Quality Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and customer end-point requirements are met.
Nokia FastMile 4G Receiver Product Overview 1.10 Preface Special information The following are examples of how special information is presented in this document. Danger — Danger indicates that the described activity or situation may result in serious personal injury or death; for example, high voltage or electric shock hazards. Warning — Warning indicates that the described activity or situation may, or will, cause equipment damage or serious performance problems.
Preface Nokia FastMile 4G Receiver Product Overview Procedure 3 Example of required substeps in a step At step 1, you must perform a series of substeps within the step. 1 2 1.11 This step has a series of substeps that you must perform to complete the step. You must perform the following substeps: i This is the first substep. ii This is the second substep. iii This is the third substep. You must perform this step. Multiple PDF document search You can use Adobe Reader Release 6.
Nokia FastMile 4G Receiver Product Overview Preface Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol.
Preface 8 Nokia FastMile 4G Receiver Product Overview 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview Table of contents Issue: 01 1 Preface.............................................................................................3 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.10.1 1.11 Summary of document issue changes ........................................................3 Scope ..........................................................................................................3 Audience...............................................................
Nokia FastMile 4G Receiver Product Overview 10 3.5 3.6 Environmental requirements......................................................................29 Additional information ................................................................................29 4 ANSI safety guidelines .................................................................31 4.1 4.1.1 4.1.2 4.2 4.2.1 4.2.2 4.3 4.3.1 4.3.2 4.3.3 4.4 4.5 4.6 Safety instructions ..................................................................
Nokia FastMile 4G Receiver Product Overview 11 Power information ........................................................................71 11.1 11.2 Power information for the Nokia FastMile 4G Receiver ............................71 Available PoE injectors..............................................................................71 12 Performance information .............................................................75 12.1 12.2 12.3 12.4 Performance overview...................................
Nokia FastMile 4G Receiver Product Overview 12 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview List of figures 2 ETSI environmental and CRoHS guidelines...............................19 Figure 1 Figure 2 Figure 3 Products below MCV value label...............................................................20 Products above MCV value label ..............................................................21 Recycling/take back/disposal of product symbol .......................................23 4 ANSI safety guidelines ......................................
Nokia FastMile 4G Receiver Product Overview Figure 23 Figure 24 Figure 25 11 Power information ........................................................................71 Figure 26 PoE injectors available from Nokia............................................................74 13 Management using the Nokia Wireless app ...............................93 Figure 27 Figure 28 Figure 29 Before we begin screen.............................................................................
Nokia FastMile 4G Receiver Product Overview Figure 49 Figure 50 Figure 51 Figure 52 Figure 53 Figure 54 Figure 55 Figure 56 Figure 57 Figure 58 Figure 59 Figure 60 Figure 61 Figure 62 14 Management using the Web UI..................................................135 Figure 63 Example of the top part of the Status screen when the FastMile 4G Receiver is not connected to a cell..........................................................
Nokia FastMile 4G Receiver Product Overview Figure 77 Figure 78 Figure 79 Figure 80 Figure 81 Figure 82 Figure 83 Figure 84 Figure 85 Figure 86 Figure 87 Figure 88 Figure 89 Figure 90 Figure 91 Figure 92 16 Example of the Delete Access Point window ..........................................146 Example of the Edit Location window......................................................147 Example of the Edit Controller window....................................................
Nokia FastMile 4G Receiver Product Overview List of tables 3 ETSI safety guidelines..................................................................25 Table 1 Safety labels ..............................................................................................26 4 ANSI safety guidelines .................................................................31 Table 2 Safety labels ..............................................................................................
Nokia FastMile 4G Receiver Product Overview Table 23 Table 24 Table 25 Table 26 18 Carrier aggregation support for Model 4G05-A and Model 4G05-B (2*2 MIMO downlink) .................................................................................83 Carrier aggregation support for Model 4G06-A (2*2 MIMO downlink) ...................................................................................................86 Carrier aggregation support for Model 4G17-A (2*2 MIMO downlink with SISO uplink) ...........
Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines 2 ETSI environmental and CRoHS guidelines This chapter provides information about the ETSI environmental China Restriction of Hazardous Substances (CRoHS) regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment. This chapter also includes environmental operation parameters of general interest. 2.
ETSI environmental and CRoHS guidelines Figure 1 Nokia FastMile 4G Receiver Product Overview Products below MCV value label 18986 2.1.2.2 Products containing hazardous substances above Maximum Concentration Value (MCV) label Figure 2 shows the label that indicates a product is above the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products).
Nokia FastMile 4G Receiver Product Overview Figure 2 ETSI environmental and CRoHS guidelines Products above MCV value label 18985 Together with major international telecommunications equipment companies, Nokia has determined it is appropriate to use an EFUP of 50 years for network infrastructure equipment and an EFUP of 20 years for handsets and accessories.
ETSI environmental and CRoHS guidelines 2.3.1 Nokia FastMile 4G Receiver Product Overview Environmental requirements See chapter 16 in this document for more information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. 2.3.2 Storage According to ETS 300-019-1-1 - Class 1.1, storage of Nokia FastMile 4G Receiver equipment must be in Class 1.1, weather-protected, temperature-controlled locations. 2.3.
Nokia FastMile 4G Receiver Product Overview 2.3.6 ETSI environmental and CRoHS guidelines Material content compliance European Union (EU) Directive 2002/95/EC, “Restriction of the use of certain Hazardous Substances” (RoHS), restricts the use of lead, mercury, cadmium, hexavalent chromium, and certain flame retardants in electrical and electronic equipment.
ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Product Overview In compliance with legal requirements and contractual agreements, where applicable, Nokia will offer to provide for the collection and treatment of Nokia products bearing the logo shown in Figure 3 at the end of their useful life, or products displaced by Nokia equipment offers.
Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines 3 ETSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment in the ETSI market. 3.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 3.1.
ETSI safety guidelines Nokia FastMile 4G Receiver Product Overview The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note — Information of special interest.
Nokia FastMile 4G Receiver Product Overview 3.2.1 ETSI safety guidelines EMC compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC requirements: • Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.
ETSI safety guidelines 3.3 Nokia FastMile 4G Receiver Product Overview Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Note 1 — The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. Note 2 — The Nokia FastMile 4G Receiver equipment complies with BS EN 61140. 3.3.
Nokia FastMile 4G Receiver Product Overview 3.4 ETSI safety guidelines ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution — This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver.
ETSI safety guidelines 30 Nokia FastMile 4G Receiver Product Overview 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines 4 ANSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of the Nokia FastMile 4G Receiver equipment in the North American or ANSI market. 4.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 4.1.
ANSI safety guidelines Nokia FastMile 4G Receiver Product Overview The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note — Information of special interest.
Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines Figure 4 shows a sample safety label for FCC and Figure 5 shows a sample safety label for ETL. Figure 4 Sample safety label for FCC Tested to Comply with FCC Standards FOR HOME OR OFFICE USE c ® COMMUNICATION SERVICE EQUIPMENT US LISTED 27FY Type 3R Enclosure - Rainproof This device complies with Part 15 of the FCC Rules.
ANSI safety guidelines 4.2.1 Nokia FastMile 4G Receiver Product Overview EMC, EMI, and ESD compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC, EMI, and ESD requirements: • Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247, Part 15.255 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Nokia FastMile 4G Receiver Product Overview 4.3 ANSI safety guidelines Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Note — The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. 4.3.
ANSI safety guidelines 4.4 Nokia FastMile 4G Receiver Product Overview ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution — This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Product Overview Product overview 5 Product overview 5.1 Overview of the Nokia FastMile 4G Receiver 5.2 End-to-end example 5.3 Installing the Nokia FastMile 4G Receiver 5.1 Overview of the Nokia FastMile 4G Receiver The Nokia FastMile 4G Receiver is an outdoor device used in the Nokia FastMile 4G solution.
Product overview Nokia FastMile 4G Receiver Product Overview Figure 6 Application example of the Nokia FastMile 4G Receiver Nokia PoE FastMile 4G Receiver Injector Radio basestation Residential gateway WiFi or Ethernet connectivity to end-user devices LTE 1 Gbps Ethernet Wi-Fi or Ethernet 28814 The Nokia FastMile 4G Receiver is available in the following model types: • Compact multi-band; this model type has the following features: • fixed beamforming antennas • multi-band transmission • Compact
Nokia FastMile 4G Receiver Product Overview Figure 7 Product overview Examples of model types of the Nokia FastMile 4G Receiver Compact/multi-band Compact/mono-band ABA High gain CBRS band 36312 The Nokia FastMile 4G Receiver has built-in antenna and LTE modem that provide the LTE broadband access to the network. The Nokia FastMile 4G Receiver is capable of withstanding outdoor environmental conditions.
Product overview Nokia FastMile 4G Receiver Product Overview Due to the independence between the Nokia FastMile 4G Receiver and the gateway, the Nokia FastMile 4G Receiver also addresses the business market. The business customer can seamlessly re-use their existing business gateway. The Nokia FastMile 4G Receiver supports extended QCI and multiple APNs that can be mapped on VLANs to support QoS for different services.
Nokia FastMile 4G Receiver Product Overview Functional overview 6 Functional overview 6.1 Overview 6.2 LTE characteristics 6.3 Data forwarding 6.4 Ethernet characteristics 6.5 Power supply characteristics 6.6 Remote management protocols 6.1 Overview The Nokia FastMile 4G Receiver provides wireless broadband access in the form of LTE to meet the ever growing network needs of end users.
Functional overview Nokia FastMile 4G Receiver Product Overview See the Installation guide for more information about how the Nokia Wireless app is used in the installation process. See chapter 13 in this document for more information about how Nokia Wireless app can be used for management of the Nokia FastMile 4G Receiver. 6.1.
Nokia FastMile 4G Receiver Product Overview 6.1.3 Functional overview Remote management The Nokia FastMile 4G Receiver supports remote management capability, allowing management and health monitoring of it from the Nokia Altiplano FastMile Controller (through NETCONF) or from an ACS (through TR-069). Note 1 — The NETCONF version of the FastMile 4G Receiver for remote management from the Nokia Altiplano FastMile Controller is not supported from FastMile 4G Release 2.0.03a onwards.
Functional overview Nokia FastMile 4G Receiver Product Overview Notes (1) Note that B48 for the 4G01-B has not been FCC CBRS Part96 certified and is not ready for commercial use. 6.
Nokia FastMile 4G Receiver Product Overview Functional overview • supports IEEE802.3az energy efficient Ethernet • the Ethernet cable for all models is also used for power over Ethernet (PoE) as per IEEE802.3 at type-2 6.5 Power supply characteristics The following are some of the key power supply characteristics of the Nokia FastMile 4G Receiver: • powered through PoE from a Nokia-approved residential gateway, or through a Nokia-approved PoE injector (see section 11.
Functional overview Figure 9 Nokia FastMile 4G Receiver Product Overview Remote management of the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller IPTV Core Internet VoIP Nokia Altiplano Fastmile Controller ACS Radio basestation Nokia PoE FastMile 4G Receiver Injector Residential gateway NETCONF WiFi or Etherne connectivity to end-user devic that are using IPTV, internet, and VoIp TR-069 LTE 1 Gbps Ethernet Wi-Fi or Ethernet 28 Figure 10 shows an ACS being used for r
Nokia FastMile 4G Receiver Product Overview Figure 10 Functional overview Remote management of the Nokia FastMile 4G Receiver through an ACS IPTV Core Internet Radio basestation VoIP ACS Nokia PoE FastMile 4G Receiver Injector Residential gateway TR-069 LTE 1 Gbps Ethernet WiFi or Ethernet connectivity to end-user devices that are using IPTV, internet, and VoIp Wi-Fi or Ethernet 28817 Issue: 01 3TG-01505-AAAB-TCZZA 47
Functional overview 48 Nokia FastMile 4G Receiver Product Overview 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview Model overview 7 Model overview 7.1 Models of the Nokia FastMile 4G Receiver 7.1 Models of the Nokia FastMile 4G Receiver A wide range of models are available for the Nokia FastMile 4G Receiver to support different E-UTRA bands and band combinations for LTE, including the capability to limit the bands to be used among the bands physically supported, to support network resource planning, and to speed up the cell attach speed.
Model overview Nokia FastMile 4G Receiver Product Overview Model E-UTRA band support and frequencies Antenna configuration Model type 4G03-A • Band 7: FDD, Tx 2500 MHz – 2570 MHz, Rx 2620 MHz – 2690 MHz Band 38: TDD, 2570 MHz – 2620 MHz Band 40: TDD, 2300 MHz – 2400 MHz Band 41: TDD, 2496 MHz – 2690 MHz Integrated with 12.
Nokia FastMile 4G Receiver Product Overview Model overview Model E-UTRA band support and frequencies Antenna configuration Model type 4G06-A • Band 2: FDD, Tx 1850 MHz - 1910 MHz, Rx 1930 MHz - 1990 MHz Band 25: FDD, Tx 1850 MHz - 1915 MHz, Rx 1930 MHz - 1995 MHz Band 4: FDD, Tx 1710 MHz - 1755 MHz, Rx 2110 MHz - 2155 MHz Band 66: FDD, Tx 1710 MHz - 1780 MHz, Rx 2110 MHz - 2200 MHz Band 7: FDD, Tx 2500 MHz - 2570 MHz, Rx 2620 MHz - 2690 MHz Band 42: TDD, 3400 MHz - 3600 MHz Band 43: TDD, 3600 MHz -
Model overview Nokia FastMile 4G Receiver Product Overview Model Product details 4G06-A Nokia FM compact 4G17-A Nokia FM compact (2 of 2) 52 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview Physical interfaces 8 Physical interfaces 8.1 Physical interfaces of the Compact mono-band and ABA models 8.2 Physical interfaces of the Compact multi-band models 8.3 Physical interfaces of the High gain CBRS model 8.1 Physical interfaces of the Compact mono-band and ABA models Table 7 describes the physical interfaces of the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver.
Physical interfaces Nokia FastMile 4G Receiver Product Overview Interface Description SIM slot Slot for Nano/4FF SIM card for a Compact mono-band model or ABA model of the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 11. If the SIM card needs to be replaced, the Nokia FastMile 4G Receiver needs to be put in a powered off state before the SIM card can be removed and the new one inserted See section 9.
Nokia FastMile 4G Receiver Product Overview Interface Ethernet port Physical interfaces Description Female RJ 45 connector for attaching a customer-supplied Ethernet cable: • • the Model 4G17-A has a floating ground design that supports a Cat5e non-shielded or shielded twisted pair Ethernet cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length all other Compact multi-band models require a cat5e shielded Ethernet cable with standard pinouts that is a maximum of 80 m (262 ft) in
Physical interfaces Nokia FastMile 4G Receiver Product Overview Figure 12 Location of the ground point for the Compact multi-band models of the Nokia FastMile 4G Receiver Ground point 28798 Figure 13 shows the location of the physical interfaces that are on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Product Overview 8.3 Physical interfaces Physical interfaces of the High gain CBRS model Table 9 describes the physical interfaces of the High gain CBRS model of the Nokia FastMile 4G Receiver. Table 9 Physical interfaces of the High gain CBRS model of the Nokia FastMile 4G Receiver Interface Ground point Description Point for connecting to external ground. Connection to the ground point is not required. Located on the back of the unit; see Figure 14.
Physical interfaces Nokia FastMile 4G Receiver Product Overview Figure 14 Location of the ground point for High gain CBRS model of the Nokia FastMile 4G Receiver Ground point 36313 Figure 15 shows the location of the physical interfaces that are on the underside of the High gain CBRS model of the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Product Overview Figure 15 Physical interfaces Location of physical interfaces on the underside of the High gain CBRS model type of the Nokia FastMile 4G Receiver TEST POE SIM RESET Reset button Measurement button SIM Tray Signal strength LEDs Status LED Ethernet port 36314 Issue: 01 3TG-01505-AAAB-TCZZA 59
Physical interfaces 60 Nokia FastMile 4G Receiver Product Overview 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview SIM cards 9 SIM cards 9.1 SIM card information for the Compact mono-band and ABA models 9.2 SIM card information for the Compact multi-band models 9.3 SIM card information for the High gain CBRS model 9.
SIM cards Nokia FastMile 4G Receiver Product Overview 9.2 SIM card information for the Compact multi-band models The SIM card installed in the Nokia FastMile 4G Receiver allows the Nokia FastMile 4G Receiver to connect to the LTE network and determines the remote management protocol supported for the Nokia FastMile 4G Receiver; see section 6.6 for more information about remote management.
Nokia FastMile 4G Receiver Product Overview Figure 18 SIM cards Detailed view of SIM card slot on the High gain CBRS model TEST POE SIM RESET RESET 36315 The Nokia FastMile 4G Receiver Installation Guide provides detailed steps for inserting the SIM card. The SIM card must be appropriate for the remote management protocol to be used for the Nokia FastMile 4G Receiver.
SIM cards 64 Nokia FastMile 4G Receiver Product Overview 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview LEDs 10 LEDs 10.1 Status LED 10.2 Signal strength LEDs 10.
LEDs Nokia FastMile 4G Receiver Product Overview Figure 21 Location of the status LED on the High gain CBRS model of the Nokia FastMile 4G Receiver TEST POE SIM RESET Status LED 36316 The status LED behaves differently depending on whether the Nokia FastMile 4G Receiver is managed from: • the Nokia Altiplano FastMile Controller (through NETCONF): see Table 10 • an ACS (through TR-069): see Table 11 Note — The NETCONF version of the FastMile 4G Receiver for remote management from the Nokia Altiplan
Nokia FastMile 4G Receiver Product Overview Table 11 Status LED behavior for Nokia FastMile 4G Receiver managed from an ACS LED color LED priority LED behavior Status information Blue First priority Blinking Bluetooth connection in progress Solid Bluetooth connection established Off No Bluetooth connection Blinking twice per second Kernel and application start up Blinking one per second Application start up Solid Start up Off Software is stable Green 10.
LEDs Nokia FastMile 4G Receiver Product Overview The signal strength LEDs can be activated by pressing the measurement button on the side of the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 23 shows the location of the measurement button. Figure 23 Location of the measurement button on the Compact multi-band models Measurement button 28885 The signal strength LEDs act as a set to indicate the LTE signal strength detected by the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Product Overview 10.2.2 LEDs Signal strength LEDs on the High gain CBRS model Five signal strength LEDs are provided on the underside of the High gain CBRS model of the Nokia FastMile 4G Receiver as shown in Figure 24.
LEDs Nokia FastMile 4G Receiver Product Overview Table 13 70 Signal strength LED threshold values Number of lit LEDs Threshold None <-110dBm One -110 to -106 dBm Two -105 to -101dBm Three -100 to -96dBm Four -95 to -91dBm Five >=-90dBm 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview Power information 11 Power information 11.1 Power information for the Nokia FastMile 4G Receiver 11.2 Available PoE injectors 11.1 Power information for the Nokia FastMile 4G Receiver The Nokia FastMile 4G Receiver receives power though a Cat5e shielded Ethernet cable (or through a non-shielded Ethernet cable for the Model 4G17-A only) that must be connected to a Nokia-approved residential gateway or to a Nokia-approved PoE injector (see section 11.
Power information Nokia FastMile 4G Receiver Product Overview The following classes of PoE injectors are available from Nokia for use with the FastMile 4G Receiver: • Class I: can comply with EN 60950-1 if grounding is provided on the wall socket; should be put as close as possible to the place where the Ethernet cable enters the home • Class II: can comply with EN 60950-1 if no grounding is provided on the wall socket; can also be used if grounding is provided on the wall socket The following tables li
Nokia FastMile 4G Receiver Product Overview Table 15 Power information Available PoE injectors for models other than Model 4G17-A Class Model Description Color Nokia part number Vendor part number Class I 15w FWAPoE2-CB-US-W 15w G1344A 50V 0.3A, MAINS CORD TYPE B-US White 3TG-01541-AA G1344A-530-030-PSE1000, CH-331C+CH-706,White,US 15w FWAPoE2-CEF-EU-W 15w G1344A 50V 0.
Power information Nokia FastMile 4G Receiver Product Overview Figure 26 PoE injectors available from Nokia POWER/Acti POWER ve ACTIVE LAN LAN POE LAN port PoE port 15W PoE injector POE LAN port PoE port 30W PoE injector 36184 Table 16 provides LED information for the PoE injectors available from Nokia.
Nokia FastMile 4G Receiver Product Overview Performance information 12 Performance information 12.1 Performance overview 12.2 Throughput information 12.3 Carrier aggregation information 12.4 Power consumption information 12.1 Performance overview This chapter provides the following performance information for the Nokia FastMile 4G Receiver: • throughput information: see section 12.2 • carrier aggregation information: see section 12.3 • power consumption information: section 12.
Performance information Nokia FastMile 4G Receiver Product Overview The results in the above table are based on the following: • • • • • • • • • • Downlink: DL 3xCA 2x2MIMO 256 QAM Uplink: single carrier 64 QAM FDD inter-band 3CA TDD Band 41 intra-Band 2CA, configuration is configuration 2, subframe 7 Base Bandwidth 20M Data rates can have a margin of 2% Packet length is 1470B for UDP Window is 1000k for TCP Data rates are for IPv4 cases Data forwarding working on router model The end-to-end throughput
Nokia FastMile 4G Receiver Product Overview Table 18 Performance information Carrier aggregation support for Model 4G01-A and Model 4G01-B (2*2 MIMO downlink with SISO uplink) Downlink Index Upload PCC SCC1 SCC2 SCC3 PCC SCC 1 42A 43A 2 43A 42A 3 42C 4 43C 5 48C 6 42A 42A 7 43A 43A 8 48A 48A 9 42A 43A 42A 43A 10 43A 42A 43A 42A 11 42C 42C 12 43C 43C 13 48C 48C 14 42A 42A 42A 42A 15 43A 43A 43A 43A 16 48A 48A 48A 48A 17 42A 43C 18 43A 42
Performance information Nokia FastMile 4G Receiver Product Overview Downlink Index Upload PCC SCC1 32 48A 48C 33 42A 42A 34 42A 35 SCC2 SCC3 PCC SCC 48A 48A 43A 42A 42A 43A 43A 42A 43A 43A 43A 42A 43A 43A 36 43A 42A 42A 43A 42A 37 42D 42C 38 43D 43C 39 48D 48C 40 42A 42A 42A 42A 42A 41 43A 43A 43A 43A 43A 42 48A 48A 48A 48A 48A 43 42A 43D 44 43A 42D 45 48A 48D 46 42A 42A 42A 43A 47 42A 42A 43A 43A 48 42A 43A 43A 43A 49
Nokia FastMile 4G Receiver Product Overview Performance information Downlink Index Upload PCC SCC1 SCC2 SCC3 PCC SCC 65 43A 42A 42A 42A 43A 42A 66 43A 43A 42A 42A 43A 43A 67 43A 43A 43A 42A 43A 43A 68 42E 42C 69 43E 43C 70 48E 48C 71 48A 48A 48C 72 42A 42A 42A 73 43A 43A 74 48A 48A 48A 48A 42A 42A 42A 43A 43A 43A 43A 48A 48A 48A 48A (3 of 3) Table 19 Index Issue: 01 Carrier aggregation support for Model 4G01-C (2*2 MIMO downlink with SIS
Performance information Nokia FastMile 4G Receiver Product Overview Table 20 Index Carrier aggregation support for Model 4G02-A (2*2 MIMO downlink with SISO uplink) Downlink Uplink PCC 1 3C 2 3A 3 3C 4 3A 5 3D 6 3A 7 3D 8 3A 9 3E 10 3A 11 3E 12 3A Table 21 SCC1 SCC2 PCC SCC1 3A 3C 3A 3A 3A 3A 3A 3C 3A 3A 3A 3A 3A 3A 3A 3C 3A 3A 3A 3A 3A Carrier aggregation support for Model 4G03-A (2*2 MIMO downlink with SISO uplink) Downlink index SCC3 PCC Uplink SCC
Nokia FastMile 4G Receiver Product Overview Performance information Downlink index Uplink PCC SCC PCC SCC 14 38A 38A 38A 38A 15 40A 40A 40A 40A 16 41A 41A 41A 41A 17 7D 18 38D 19 40D 20 41D 21 7C 7A 22 38C 38A 23 40C 40A 24 41C 41A 25 7D 7C 26 38D 38C 27 40D 40C 28 41D 41C 29 7C 7A 7A 7A 30 38C 38A 38A 38A 31 40C 40A 40A 40A 32 41C 41A 41A 41A 33 7E 34 38E 35 40E 36 41E 37 7C 7C 38 38C 38C 39 40C 40C 40 41C 41C 41
Performance information Nokia FastMile 4G Receiver Product Overview Downlink index Uplink PCC SCC PCC SCC 47 40C 40C 40A 40A 48 41C 41C 41A 41A (3 of 3) Table 22 Index 82 Carrier aggregation support for Model 4G04-A (2*2 MIMO downlink with SISO uplink) Downlink Uplink PCC SCC1 1 3A 7A 2 3A 20A 3 3A 32A 4 7A 3A 5 20A 3A 6 7A 20A 7 7A 32A 8 20A 7A 9 20A 32A 10 3A 11 PCC SCC1 7A 3A 7A 3A 20A 3A 20A 12 7A 3A 7A 3A 13 20A 3A 20A 3A 14 7A
Nokia FastMile 4G Receiver Product Overview Table 23 Performance information Carrier aggregation support for Model 4G05-A and Model 4G05-B (2*2 MIMO downlink) Downlink Index PCC SCC1 1 1A 3A 2 3A 1A 3 1A 7A 4 7A 1A 5 1A 38A 6 38A 1A 7 1A 41A 8 41A 1A 9 3A 7A 10 7A 3A 11 3A 20A 12 20A 3A 13 3A 28A 14 28A 3A 15 3A 38A 16 38A 3A 17 3A 40A 18 40A 3A 19 3A 41A 20 41A 3A 21 28A 40A 22 40A 28A 23 28A 41A 24 41A 28A 25 3C 26 28C 27
Performance information Nokia FastMile 4G Receiver Product Overview Downlink Index PCC SCC1 SCC2 32 7A 1C 33 3A 7C 34 7C 3A 35 3A 38C 36 38C 3A 37 3A 40C 38 40C 3A 39 3A 41C 40 41C 3A 41 28A 40C 42 40C 28A 43 28A 41C 44 41C 28A 45 1A 3A 7A 46 3A 1A 7A 47 7A 3A 1A 48 1A 3A 38A 49 3A 1A 38A 50 38A 3A 1A 51 1A 3A 41A 52 3A 1A 41A 53 41A 3A 1A 54 3A 28A 40A 55 28A 3A 40A 56 40A 28A 3A 57 3A 28A 41A 58 28A 3A 41A
Nokia FastMile 4G Receiver Product Overview Performance information Downlink Index PCC SCC1 SCC2 65 3C 7C 66 7C 3C 67 3A 7D 68 7D 3A 69 3C 38C 70 38C 3C 71 3A 38D 72 38D 3A 73 3C 40C 74 40C 3C 75 3A 40D 76 40D 3A 77 3C 41C 78 41C 3C 79 3A 41D 80 41D 3A 81 28C 40C 82 40C 28C 83 28A 40D 84 40D 28A 85 28C 41C 86 41C 28C 87 28A 41D 88 41D 28A 89 1A 3A 7C 90 3A 1A 7C 91 7C 3A 1A 92 1A 3C 7A 93 3C 1A 7A 94 7A 3C 1
Performance information Nokia FastMile 4G Receiver Product Overview Downlink Index PCC SCC1 SCC2 98 1A 3C 38A 99 3C 1A 38A 100 38A 3C 1A 101 1A 3A 41C 102 3A 1A 41C 103 41C 3A 1A 104 1A 3C 41A 105 3C 1A 41A 106 41A 3C 1A 107 3A 28A 40C 108 28A 3A 40C 109 40C 28A 3A 110 3A 28C 40A 111 28C 3A 40A 112 40A 28C 3A 113 3A 28A 41C 114 28A 3A 41C 115 41C 28A 3A 116 3A 28C 41A 117 28C 3A 41A 118 41A 28C 3A (4 of 4) Table 24 I
Nokia FastMile 4G Receiver Product Overview Index Performance information Downlink PCC SCC1 7 2A 42A 8 42A 2A 9 2A 48A 10 48A 2A 11 2A 66A 12 66A 2A 13 4A 7A 14 7A 4A 15 4A 28A 16 28A 4A 17 4A 42A 18 42A 4A 19 4A 43A 20 43A 4A 21 7A 28A 22 28A 7A 23 7A 42A 24 42A 7A 25 7A 43A 26 43A 7A 27 7A 66A 28 66A 7A 28 28A 42A 30 42A 28A 31 28A 43A 32 43A 28A 33 28A 66A 34 66A 28A 35 42A 66A 36 66A 42A 37 43A 66A 38 66A
Performance information Index Nokia FastMile 4G Receiver Product Overview Downlink PCC SCC1 SCC2 40 4C 41 7C 42 25C 43 28C 44 42C 45 43C 46 48C 47 66C 48 2A 4A 28A 49 4A 2A 28A 50 28A 2A 4A 51 2A 4A 48A 52 4A 2A 48A 53 48A 2A 4A 54 2A 7A 42A 55 7A 2A 42A 56 42A 2A 7A 57 2A 28A 42A 58 28A 2A 42A 59 42A 2A 28A 60 2A 28A 43A 61 28A 2A 43A 62 43A 2A 28A 63 2A 28A 66A 64 28A 2A 66A 65 66A 2A 28A 66 2A 48A 66A 67 48
Nokia FastMile 4G Receiver Product Overview Index Performance information Downlink PCC SCC1 SCC2 SCC3 73 7A 4A 42A 74 42A 4A 7A 75 4A 7A 43A 76 7A 4A 43A 77 43A 4A 7A 78 4A 28A 42A 79 28A 4A 42A 80 42A 4A 28A 81 4A 28A 43A 82 28A 4A 43A 83 43A 4A 28A 84 7A 28A 66A 85 28A 7A 66A 86 66A 7A 28A 87 7A 42A 66A 88 42A 7A 66A 89 66A 7A 42A 90 7A 43A 66A 91 43A 7A 66A 92 66A 7A 43A 93 28A 42A 66A 94 42A 28A 66A 95 66A 2
Performance information Nokia FastMile 4G Receiver Product Overview Index Downlink PCC SCC1 SCC2 SCC3 106 43A 7A 28A 4A 107 7A 28A 42A 66A 108 28A 7A 42A 66A 109 42A 28A 7A 66A 110 66A 28A 42A 7A 111 7A 28A 43A 66A 112 28A 7A 43A 66A 113 43A 28A 7A 66A 114 66A 28A 43A 7A (5 of 5) Table 25 Index Carrier aggregation support for Model 4G17-A (2*2 MIMO downlink with SISO uplink) Downlink Uplink PCC SCC1 1 1A 3A 2 3A 1A 3 1A 7A 4 7A 1A 5 3A
Nokia FastMile 4G Receiver Product Overview Index Performance information Downlink Uplink PCC SCC1 SCC2 19 3A 1A 32A 20 3A 7A 32A 21 7A 3A 32A 22 1A 7A 32A 23 7A 1A 32A 24 1A 3A 25 3A 26 SCC3 PCC SCC1 SCC2 7A 1A 3A 1A 7A 3A 1A 1A 3A 7A 1A 7A 27 7A 3A 1A 7A 1A 28 3A 1A 7A 3A 7A 29 7A 3A 1A 7A 3A 30 1A 3A 32A 1A 3A 31 3A 1A 32A 3A 1A 32 3A 7A 32A 3A 7A 33 7A 3A 32A 34 1A 7A 32A 35 7A 1A 32A 36 1A 3A 7A 32A 3
Performance information Table 26 92 Nokia FastMile 4G Receiver Product Overview Power consumption information for all models Condition Power consumption Maximum power consumption 10 W Idle power 1.
Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app 13 Management using the Nokia Wireless app 13.1 Using the Nokia Wireless app to manage the Nokia FastMile 4G Receiver 13.2 Using the Nokia Wireless app to manage a unit managed by the Nokia Altiplano FastMile Controller 13.3 Using the Nokia Wireless app to manage a unit managed by an ACS 13.
Management using the Nokia Wireless app Figure 27 Nokia FastMile 4G Receiver Product Overview Before we begin screen Figure 28 shows the “Terms of Service” screen that is accessed through the “Before we begin” screen.
Nokia FastMile 4G Receiver Product Overview Figure 28 Management using the Nokia Wireless app Terms of Service screen The Nokia Wireless app is protected as much as possible against malicious users. Tools like obfuscation and encryption used by the Nokia Wireless app, as well as runtime checks and tamper detection, make it hard for malicious users to understand the code flow or to hack the application.
Management using the Nokia Wireless app 13.
Nokia FastMile 4G Receiver Product Overview Figure 29 Management using the Nokia Wireless app Introductory screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF Continue by tapping on “Get started”.
Management using the Nokia Wireless app Figure 30 Nokia FastMile 4G Receiver Product Overview Screen with prompt to scan the QR code for unit managed by the Nokia Altiplano FastMile Controller through NETCONF Tap on “Scan” to start the scan of the QR code. Use the viewfinder of the phone to align with the QR code. Figure 31 shows the QR code screen.
Nokia FastMile 4G Receiver Product Overview Figure 31 3 Management using the Nokia Wireless app QR code screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF The Nokia Wireless app displays the screen to install the Nokia FastMile 4G Receiver. Tap on the “Already Installed?” option. Figure 32 shows the Already Installed option.
Management using the Nokia Wireless app Figure 32 4 Nokia FastMile 4G Receiver Product Overview Screen showing the Already Installed option for unit managed by the Nokia Altiplano FastMile Controller through NETCONF The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The connection will be done through Bluetooth in conjunction with a VPN.
Nokia FastMile 4G Receiver Product Overview Figure 33 Management using the Nokia Wireless app Screen for connecting to the Nokia FastMile 4G Receiver Connect to the Nokia FastMile 4G Receiver by tapping on “Connect”. 5 The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 34 shows the screen to enable the VPN profile.
Management using the Nokia Wireless app Figure 34 Nokia FastMile 4G Receiver Product Overview Screen for enabling the VPN profile Enable the VPN profile by tapping on “Connect”. 6 The android system of the mobile phone prompts you to accept the connection request. Figure 35 shows the prompt to accept the connection request.
Nokia FastMile 4G Receiver Product Overview Figure 35 Management using the Nokia Wireless app Prompt for accepting the connection request Accept the connection request by tapping on “OK”. 7 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 36 shows the screen to log in to the Nokia FastMile 4G Receiver.
Management using the Nokia Wireless app Figure 36 Nokia FastMile 4G Receiver Product Overview Screen to log in to a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Log in to the Nokia FastMile 4G Receiver by tapping on “Log in”.
Nokia FastMile 4G Receiver Product Overview 8 Management using the Nokia Wireless app You can view the following information for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller by selecting the Connection Status option of the main screen and scrolling through the screen by swiping up or down: • • LTE cell info: • • • • Current signal stats: • • • • • RSRP: RSRP (Reference Signals Received Power) is a measurement of the received power level in an LTE cell network in
Management using the Nokia Wireless app Figure 37 Nokia FastMile 4G Receiver Product Overview System state screen example for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Note — The Nokia Wireless app will display a value of “N/A” for parameters that are not supported by the installed Home 4G Receiver Software version.
Nokia FastMile 4G Receiver Product Overview Figure 38 9 Management using the Nokia Wireless app System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller You can upload updated certificates (stored under downloads in the mobile phone's directory) to the Nokia FastMile 4G Receiver. i Tap on the “Upload CA certificates” option. Figure 39 shows the screen that has the “Upload CA certificates” option.
Management using the Nokia Wireless app Figure 39 ii Nokia FastMile 4G Receiver Product Overview Screen that has the “Upload CA certificates” option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Select the required CA certificates and tap on “Ok”. Note that the certificates must be in the download folder of the mobile phone before you can upload them to the Nokia FastMile 4G Receiver. Figure 40 shows the screen that lists the CA certificates.
Nokia FastMile 4G Receiver Product Overview Figure 40 Management using the Nokia Wireless app Screen that lists the CA certificates for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The following CA certificates are supported for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller: • • • • iii Issue: 01 pmaCA.pem (used for authenticating the Nokia Altiplano FastMile Controller) logserverCA.
Management using the Nokia Wireless app Figure 41 Nokia FastMile 4G Receiver Product Overview Screen indicating that uploading of the CA certificates was successful for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Tap on “Ok” to clear the message. 10 You can reboot a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller through NETCONF by tapping on the “Reboot Device” option. Figure 42 shows the “Reboot Device” option.
Nokia FastMile 4G Receiver Product Overview Figure 42 Management using the Nokia Wireless app Screen showing the “Reboot Device” option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The screen shows the reboot message indicating that the Bluetooth connection will be interrupted and that you will be disconnected. Figure 43 shows the screen that has the reboot message.
Management using the Nokia Wireless app Figure 43 Nokia FastMile 4G Receiver Product Overview Screen showing the reboot message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Press the Reboot option if you want to proceed with the reboot, or press the Cancel option. If you pressed the Reboot option, press OK.
Nokia FastMile 4G Receiver Product Overview Figure 44 Management using the Nokia Wireless app Screen showing the “Perform Factory Reset” option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The screen shows the factory reset message indicating that the factory reset will reset the device back to factory settings and that all changes will be lost and that you will be disconnected. Figure 45 shows the screen that has the factory reset message.
Management using the Nokia Wireless app Figure 45 Nokia FastMile 4G Receiver Product Overview Screen showing the factory reset message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Press the Reset option if you want to proceed with the reset to factory settings, or press the Cancel option. If you pressed the Reset option, press OK. 13.
Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app This procedure does not involve use of the Nokia Altiplano FastMile Controller. You will need the QR code that was saved as described during installation of the Nokia FastMile 4G Receiver in order to scan it when logging in to the 4G Receiver through the Nokia Wireless app.
Management using the Nokia Wireless app Figure 46 Nokia FastMile 4G Receiver Product Overview Introductory screen for unit managed by an ACS through TR-069 Continue by tapping on “Get started”. 2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the Bluetooth MAC address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Product Overview Figure 47 Management using the Nokia Wireless app Screen with prompt to scan the QR code for unit managed by an ACS through TR-069 The Nokia Wireless app also provides a way to manually enter all the needed information in order to proceed with the installation without scanning a QR code. Tap on “Scan” to start the scan of the QR code. Use the viewfinder of the phone to align with the QR code. Figure 48 shows the QR code screen.
Management using the Nokia Wireless app Figure 48 3 Nokia FastMile 4G Receiver Product Overview QR code screen for unit managed by an ACS through TR-069 The Nokia Wireless app displays the screen to install the Nokia FastMile 4G Receiver. Tap on the “Already Installed?” option. Figure 49 shows the Already Installed option.
Nokia FastMile 4G Receiver Product Overview Figure 49 4 Management using the Nokia Wireless app Screen showing the Already Installed option for unit managed by an ACS through TR-069 The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The connection will be done through Bluetooth in conjunction with a VPN. You will need to be close to the Nokia FastMile 4G Receiver and you will need to have Bluetooth enabled on the mobile phone and accept the pairing request when it appears.
Management using the Nokia Wireless app Figure 50 Nokia FastMile 4G Receiver Product Overview Screen for connecting to the Nokia FastMile 4G Receiver Connect to the Nokia FastMile 4G Receiver by tapping on “Connect”. 5 The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 51 shows the screen to enable the VPN profile.
Nokia FastMile 4G Receiver Product Overview Figure 51 Management using the Nokia Wireless app Screen for enabling the VPN profile Enable the VPN profile by tapping on “Connect”. 6 The android system of the mobile phone prompts you to accept the connection request. Figure 52 shows the prompt to accept the connection request.
Management using the Nokia Wireless app Figure 52 Nokia FastMile 4G Receiver Product Overview Prompt for accepting the connection request Accept the connection request by tapping on “OK”. 7 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 53 shows the screen to log in to the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Product Overview Figure 53 Management using the Nokia Wireless app Screen to log in to a Nokia FastMile 4G Receiver managed by an ACS through TR-069 Log in to the Nokia FastMile 4G Receiver by tapping on “Log in”.
Management using the Nokia Wireless app 8 Nokia FastMile 4G Receiver Product Overview You can view the following information for a Nokia FastMile 4G Receiver managed by an ACS by selecting the Connection Status option of the main screen and scrolling through the screen by swiping up or down: • • LTE cell info: • • • • Current signal stats: • • • • • connection state: Does the Nokia FastMile 4G Receiver connect to this cell status: The current operational state of the PDN connection EARFCN: The ca
Nokia FastMile 4G Receiver Product Overview Figure 54 Management using the Nokia Wireless app System state screen example for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 Note — The Nokia Wireless app will display a value of “N/A” for parameters that are not supported by the installed Home 4G Receiver Software version.
Management using the Nokia Wireless app Figure 55 126 Nokia FastMile 4G Receiver Product Overview System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 3TG-01505-AAAB-TCZZA Issue: 01
Nokia FastMile 4G Receiver Product Overview 9 You can upload updated certificates (stored under downloads in the mobile phone's directory) to the Nokia FastMile 4G Receiver. i Tap on the “Upload CA certificates” option, as shown in Figure 56. Figure 56 ii Issue: 01 Management using the Nokia Wireless app Screen that has the “Upload CA certificates” option for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 Tap on “Upload” on the Upload CA Certificates screen, as shown in Figure 57.
Management using the Nokia Wireless app Figure 57 Nokia FastMile 4G Receiver Product Overview Upload CA Certificates screen for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 A list of CA certificates appears, as shown in Figure 58.
Nokia FastMile 4G Receiver Product Overview Figure 58 iii Issue: 01 Management using the Nokia Wireless app List of CA certificates displayed on the Upload CA Certificates screen for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 Select the required CA certificates and tap on “Ok”. Note that the certificates must be in the download folder of the mobile phone before you can upload them to the Nokia FastMile 4G Receiver.
Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview The following CA certificates are supported for a Nokia FastMile 4G Receiver Nokia FastMile 4G Receiver managed by an ACS: • • • • • iv 130 pmaCA.pem (used for authenticating the Nokia Altiplano FastMile Controller) logserverCA.pem (used for authenticating the log server) swserverCA.pem (used for authenticating the software upgrade server) diagserverCA.pem (used for authenticating the optional diagnostics server) acsCA.
