Nokia FastMile 4G Receiver Installation Guide FastMile 2.1.
Nokia FastMile 4G Receiver Installation Guide Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of their respective owners. The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein. © 2019 Nokia.
Nokia FastMile 4G Receiver Installation Guide Preface 1 Preface This preface provides general information about the installation guide for the Nokia FastMile 4G Receiver. 1.1 Scope This document provides information for installing the Nokia FastMile 4G Receiver along with information about safety. 1.2 Audience This document is intended for planners, administrators, operators, and maintenance personnel involved in installing the Nokia FastMile 4G Receiver. 1.
Preface Nokia FastMile 4G Receiver Installation Guide 1.7 Safety information For safety information, see the appropriate safety guideline chapters. 1.8 Documents Documents are available at the Nokia Documentation Center. Procedure 1 To access a document on the Nokia Documentation Center Individual PDFs of customer documents are accessible through the Nokia Documentation Center. 12 1 Go to http://networks.nokia.com.
Nokia FastMile 4G Receiver Installation Guide 1.9 Preface Special information The following are examples of how special information is presented in this document. Danger — Danger indicates that the described activity or situation may result in serious personal injury or death; for example, high voltage or electric shock hazards. Warning — Warning indicates that the described activity or situation may, or will, cause equipment damage or serious performance problems.
Preface Nokia FastMile 4G Receiver Installation Guide Procedure 3 Example of required substeps in a step At step 1, you must perform a series of substeps within the step. 1 2 1.10 This step has a series of substeps that you must perform to complete the step. You must perform the following substeps: i This is the first substep. ii This is the second substep. iii This is the third substep. You must perform this step. Multiple PDF document search You can use Adobe Reader Release 6.
Nokia FastMile 4G Receiver Installation Guide Preface Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol.
Preface 16 Nokia FastMile 4G Receiver Installation Guide 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide Table of contents Issue: 01 1 Preface...........................................................................................11 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.9.1 1.10 Scope ........................................................................................................11 Audience....................................................................................................11 Required knowledge........................................
Nokia FastMile 4G Receiver Installation Guide 4 ANSI safety guidelines .................................................................23 4.1 4.1.1 4.1.2 4.2 4.2.1 4.2.2 4.3 4.3.1 4.3.2 4.3.3 4.4 4.5 Safety instructions .....................................................................................23 Safety instruction boxes in customer documentation ................................23 Safety-related labels..................................................................................
Nokia FastMile 4G Receiver Installation Guide Issue: 01 12.7 12.8 12.9 12.10 12.11 12.12 The receiver cannot be installed at this position......................................102 This subscription ID is not provisioned by the Fastmile Controller ..........103 This subscriber ID has already completed a successful installation........103 Nokia FastMile 4G Receiver firmware upgrade to latest build failed .......103 Nokia FastMile 4G Receiver detached from network ..............................
Nokia FastMile 4G Receiver Installation Guide 20 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide List of figures 2 ETSI environmental and CRoHS guidelines...............................11 Figure 1 Figure 2 Figure 3 Products below MCV value label...............................................................12 Products above MCV value label ..............................................................13 Recycling/take back/disposal of product symbol .......................................15 4 ANSI safety guidelines ....................................
Nokia FastMile 4G Receiver Installation Guide Figure 26 Figure 27 Figure 28 Figure 29 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Figure 35 Figure 36 Figure 37 Figure 38 Figure 39 Figure 40 Figure 41 Figure 42 Figure 43 Figure 44 Figure 45 11 Mounting and connecting the Nokia FastMile 4G Receiver.........................................................................................
Nokia FastMile 4G Receiver Installation Guide List of tables 3 ETSI safety guidelines..................................................................17 Table 1 Safety labels ..............................................................................................18 4 ANSI safety guidelines .................................................................23 Table 2 Safety labels ..............................................................................................
Nokia FastMile 4G Receiver Installation Guide 10 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide ETSI environmental and CRoHS guidelines 2 ETSI environmental and CRoHS guidelines This chapter provides information about the ETSI environmental China Restriction of Hazardous Substances (CRoHS) regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment. This chapter also includes environmental operation parameters of general interest. 2.
ETSI environmental and CRoHS guidelines Figure 1 Nokia FastMile 4G Receiver Installation Guide Products below MCV value label 18986 2.1.2.2 Products containing hazardous substances above Maximum Concentration Value (MCV) label Figure 2 shows the label that indicates a product is above the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products).
Nokia FastMile 4G Receiver Installation Guide Figure 2 ETSI environmental and CRoHS guidelines Products above MCV value label 18985 Together with major international telecommunications equipment companies, Nokia has determined it is appropriate to use an EFUP of 50 years for network infrastructure equipment and an EFUP of 20 years for handsets and accessories.
ETSI environmental and CRoHS guidelines 2.3.1 Nokia FastMile 4G Receiver Installation Guide Environmental requirements See the Nokia FastMile 4G Receiver Product Overview for information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. 2.3.2 Storage According to ETS 300-019-1-1 - Class 1.1, storage of Nokia FastMile 4G Receiver equipment must be in Class 1.1, weather-protected, temperature-controlled locations. 2.3.
Nokia FastMile 4G Receiver Installation Guide 2.3.6 ETSI environmental and CRoHS guidelines Material content compliance European Union (EU) Directive 2002/95/EC, “Restriction of the use of certain Hazardous Substances” (RoHS), restricts the use of lead, mercury, cadmium, hexavalent chromium, and certain flame retardants in electrical and electronic equipment.
ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Installation Guide In compliance with legal requirements and contractual agreements, where applicable, Nokia will offer to provide for the collection and treatment of Nokia products bearing the logo shown in Figure 3 at the end of their useful life, or products displaced by Nokia equipment offers.
Nokia FastMile 4G Receiver Installation Guide ETSI safety guidelines 3 ETSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment in the ETSI market. 3.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 3.1.
ETSI safety guidelines Nokia FastMile 4G Receiver Installation Guide The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note — Information of special interest.
Nokia FastMile 4G Receiver Installation Guide 3.2.1 ETSI safety guidelines EMC compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC requirements: • Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.
ETSI safety guidelines 3.3 Nokia FastMile 4G Receiver Installation Guide Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Note 1 — The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. Note 2 — The Nokia FastMile 4G Receiver equipment complies with BS EN 61140. 3.3.
Nokia FastMile 4G Receiver Installation Guide 3.4 ETSI safety guidelines ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution — This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver.
ETSI safety guidelines 22 Nokia FastMile 4G Receiver Installation Guide 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide ANSI safety guidelines 4 ANSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of the Nokia FastMile 4G Receiver equipment in the North American or ANSI market. 4.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 4.1.
ANSI safety guidelines Nokia FastMile 4G Receiver Installation Guide The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note — Information of special interest.
Nokia FastMile 4G Receiver Installation Guide ANSI safety guidelines Figure 4 shows a sample safety label for FCC and Figure 5 shows a sample safety label for ETL. Figure 4 Sample safety label for FCC Tested to Comply with FCC Standards FOR HOME OR OFFICE USE c ® COMMUNICATION SERVICE EQUIPMENT US LISTED 27FY Type 3R Enclosure - Rainproof This device complies with Part 15 of the FCC Rules.
ANSI safety guidelines 4.2.1 Nokia FastMile 4G Receiver Installation Guide EMC, EMI, and ESD compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC, EMI, and ESD requirements: • Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247, Part 15.255 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Nokia FastMile 4G Receiver Installation Guide 4.3 ANSI safety guidelines Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Note — The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. 4.3.
ANSI safety guidelines 4.4 Nokia FastMile 4G Receiver Installation Guide ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution — This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide Installation overview 5 Installation overview 5.1 Overview 5.1 Overview Be sure to read the Nokia FastMile 4G Receiver Product Overview before installing the Nokia FastMile 4G Receiver. Some steps in installing the Nokia FastMile 4G Receiver differ, depending on the model type of the Nokia FastMile 4G Receiver. Table 3 indicates the model type and Ethernet cable information for each model of the Nokia FastMile 4G Receiver.
Installation overview Nokia FastMile 4G Receiver Installation Guide Table 4 lists the chapters or sections to use to install a Nokia FastMile 4G Receiver that will be remotely managed by the Nokia Altiplano FastMile Controller or an ACS. The table also indicates if and how the Nokia Wireless app is used.
Nokia FastMile 4G Receiver Installation Guide Reviewing safety information 6 Reviewing safety information 6.1 Safety information for the Nokia FastMile 4G Receiver 6.2 Available PoE injectors 6.1 Safety information for the Nokia FastMile 4G Receiver Be sure to observe the following before installing the Nokia FastMile 4G Receiver: • Professional installation is recommended for the Nokia FastMile 4G Receiver.
Reviewing safety information Nokia FastMile 4G Receiver Installation Guide Danger 1 — Lightning danger: Since cables from external environment may connect to the system and they are exposed to lightning, do not work on equipment or cables during periods of lightning activity. Danger 2 — Height danger: Falling from high elevations can cause serious injury or death. Caution should be observed whenever performing aerial installations.
Nokia FastMile 4G Receiver Installation Guide Table 5 Reviewing safety information Available PoE injectors Class Model Description Color Nokia part number Vendor part number Class I FWAPoE1-CB-US-W G0545 53V0.6A, MAINS CORD TYPE B-US White 3TG-00041-AA G0545-530-060-PSE1000, CH-331C+CH-706,White,US FWAPoE1-CEF-EU-W G0545 53V0.6A, MAINS CORD TYPE E&F-EU White 3TG-00041-AB G0545-530-060-PSE1000, CH-231+CH-706,White,EU FWAPoE1-CG-UK-W G0545 53V0.
Reviewing safety information 34 Nokia FastMile 4G Receiver Installation Guide 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide Identifying package contents 7 Identifying package contents 7.1 Package contents for the Nokia FastMile 4G Receiver 7.
Identifying package contents 36 Nokia FastMile 4G Receiver Installation Guide 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide Reviewing roles and installation prerequisites 8 Reviewing roles and installation prerequisites 8.1 Roles 8.2 Installation prerequisites for the Nokia FastMile 4G Receiver 8.
Reviewing roles and installation prerequisites Nokia FastMile 4G Receiver Installation Guide • the operator's EPC network should align with the following of the Nokia FastMile 4G Receiver: • the Nokia FastMile 4G Receiver’s mobile subscriber profile in the HSS should be • assigned by the mobile network operator as follows: - a specific APN should be used for the Nokia FastMile 4G Receiver to attach the LTE network; if no specific APN is indicated, the Nokia FastMile 4G Receiver will attach to the LTE n
Nokia FastMile 4G Receiver Installation Guide Reviewing roles and installation prerequisites • If the outside Ethernet cabling will be longer than 20 meters (64 feet), you will need a PoE+ capable surge protector for lightning protection, subject to local regulations, as indicated in section 8.2.
Reviewing roles and installation prerequisites 8.2.1 Nokia FastMile 4G Receiver Installation Guide Lightning protection and other important information Be sure to observe the following lightning protection information: Danger — If you are installing the Nokia FastMile 4G Receiver above roof level, lightning rods are required above the planned installation location.
Nokia FastMile 4G Receiver Installation Guide Inserting the SIM card in the Nokia FastMile 4G Receiver 9 Inserting the SIM card in the Nokia FastMile 4G Receiver 9.1 Overview 9.2 Inserting the SIM card 9.3 Extracting the SIM card 9.1 Overview Although this chapter provides procedures for inserting or extracting a SIM card in the Nokia FastMile 4G Receiver, you should contact your Nokia representative for more detailed information.
Inserting the SIM card in the Nokia FastMile 4G Receiver Figure 6 Nokia FastMile 4G Receiver Installation Guide View of SIM card slot on the Compact mono-band and ABA models 28642 Figure 7 shows a view of the SIM card slot on the Compact multi-band models of the Nokia FastMile 4G Receiver to help you orient the SIM card when inserting or extracting it as described in the procedures in this chapter.
Nokia FastMile 4G Receiver Installation Guide 9.2 Inserting the SIM card in the Nokia FastMile 4G Receiver Inserting the SIM card Although the following procedure provides instructions for inserting a SIM card in the Nokia FastMile 4G Receiver, you should contact your Nokia representative for more detailed information. Warning — To avoid the possibility of a short circuit, make sure that the Nokia FastMile 4G Receiver is in a powered off state before inserting the SIM card.
Inserting the SIM card in the Nokia FastMile 4G Receiver Nokia FastMile 4G Receiver Installation Guide For the Compact multi-band models: • • • turn the Nokia FastMile 4G Receiver bottom up put the SIM card into the tray in the correct orientation use your fingers to hold and push the tray and card all the way into the slot, with the hole on the right You need to insert the SIM card deep in the slot until the slot locks the SIM card in place. 3 9.
Nokia FastMile 4G Receiver Installation Guide Determining the mounting location 10 Determining the mounting location 10.1 Overview 10.2 Determining the mounting location for unit that will be managed by the Nokia Altiplano FastMile Controller 10.3 Determining the mounting location for unit that will be managed by an ACS 10.
Determining the mounting location Figure 9 Nokia FastMile 4G Receiver Installation Guide Before we begin screen Figure 10 shows the “Terms of Service” screen that is accessed through the “Before we begin” screen.
Nokia FastMile 4G Receiver Installation Guide Figure 10 Determining the mounting location Terms of Service screen If the Nokia Altiplano FastMile Controller will be used for remote management of the Nokia FastMile 4G Receiver through NETCONF, you use the Nokia Wireless app, which works with the Nokia Altiplano FastMile Controller and the Nokia FastMile 4G Receiver to determine the optimal mounting location for the Nokia FastMile 4G Receiver, as described in section 10.2.
Determining the mounting location 10.
Nokia FastMile 4G Receiver Installation Guide Determining the mounting location time is needed, you can increase the access token lifespan as described in the Installation and Deployment Guide for Nokia Altiplano Access Controller document.
Determining the mounting location Nokia FastMile 4G Receiver Installation Guide Continue by tapping on “Get started”. 2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the MAC address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G Receiver. The QR code is provided on a sheet of paper in the shipping package of the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide Determining the mounting location Figure 13 shows the QR code screen. Figure 13 3 QR code screen for unit that will be managed by the Nokia Altiplano FastMile Controller through NETCONF The Nokia Wireless app displays the screen to install the Nolia FastMile 4G Receiver. Tap on the “Install” option. Figure 14 shows the Install option.
Determining the mounting location Figure 14 4 Nokia FastMile 4G Receiver Installation Guide Screen showing the Install option for unit that will be managed by the Nokia Altiplano FastMile Controller through NETCONF The Nokia Wireless app displays the screen to select the setup method. Tap on the “NetConf with Controller” option. Figure 15 shows the NetConf with Controller option.
Nokia FastMile 4G Receiver Installation Guide Figure 15 5 Determining the mounting location Screen showing the NetConf with Controller option for unit that will be managed by the Nokia Altiplano FastMile Controller The Nokia Wireless app prompts you to log in to the Nokia Altiplano FastMile Controller. You will need to input the user name, password, and FastMile Controller URL. Figure 16 shows the prompt to log in to the Nokia Altiplano FastMile Controller.
Determining the mounting location Figure 16 Nokia FastMile 4G Receiver Installation Guide Screen for logging in to a Nokia Altiplano FastMile Controller that will be managed by the Nokia Altiplano FastMile Controller through NETCONF When the button is enabled (that is, it turns to blue), tap on “Log in” to log in to the Nokia Altiplano FastMile Controller.
Nokia FastMile 4G Receiver Installation Guide Figure 17 Determining the mounting location Screen for sharing location for unit that will be managed by the Nokia Altiplano FastMile Controller through NETCONF Share your location by tapping on “Next”. 7 The Nokia Wireless app prompts you to enter the Subscription ID so that you can register the Nokia FastMile 4G Receiver with the Nokia Altiplano FastMile Controller. Figure 18 shows the prompt to enter the Subscription ID.
Determining the mounting location Figure 18 Nokia FastMile 4G Receiver Installation Guide Screen for entering the Subscription ID for unit that will be managed by the Nokia Altiplano FastMile Controller through NETCONF Register the Nokia FastMile 4G Receiver by tapping on “Register”. 8 The Nokia Wireless app shows that registration of the Nokia FastMile 4G Receiver with the Nokia Altiplano FastMile Controller was successful. Continue by tapping on “Next”.
Nokia FastMile 4G Receiver Installation Guide Figure 19 Determining the mounting location Screen indicating that you can use the Nokia Wireless app to find an LTE base station for unit that will be managed by the Nokia Altiplano FastMile Controller through NETCONF Proceed by tapping on “Next”.
Determining the mounting location Nokia FastMile 4G Receiver Installation Guide This will allow you to connect the Nokia Wireless app to the Nokia FastMile 4G Receiver so the Nokia Wireless app can set it up and work in conjunction with it to find the strongest signal as described in the next steps. 11 The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The connection will be done through Bluetooth in conjunction with a VPN.
Nokia FastMile 4G Receiver Installation Guide 12 Determining the mounting location The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 21 shows the screen to enable the VPN profile. Figure 21 Screen for enabling the VPN profile Enable the VPN profile by tapping on “Connect”. 13 The android system of the mobile phone prompts you to accept the connection request.
Determining the mounting location Figure 22 Nokia FastMile 4G Receiver Installation Guide Prompt for accepting the connection request Accept the connection request by tapping on “OK”. 14 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 23 shows the screen to log in to the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide Figure 23 Determining the mounting location Screen to log in to a Nokia FastMile 4G Receiver that will be managed by the Nokia Altiplano FastMile Controller Log in to the Nokia FastMile 4G Receiver by tapping on “Log in”. 15 The Nokia Wireless app now sets up the Nokia FastMile 4G Receiver and shows when the set up is compete.
Determining the mounting location Nokia FastMile 4G Receiver Installation Guide The screen that shows that the Nokia FastMile 4G Receiver is being set up, and indicates the progress of the set up, and indicates that you should keep the Nokia Wireless app open. After receiving acknowledgment from the Nokia FastMile 4G Receiver of successful receipt of the configuration file, the Nokia Wireless app informs you that the setup is complete. Proceed by tapping on “Done”.
Nokia FastMile 4G Receiver Installation Guide Figure 24 Issue: 01 Determining the mounting location Information screen telling you to find a location where the Nokia FastMile 4G Receiver won’t be obstructed 3TG-00387-ABBA-TCZZA 63
Determining the mounting location Figure 25 64 Nokia FastMile 4G Receiver Installation Guide Information screen telling you to hold the Nokia FastMile 4G Receiver in place 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide Figure 26 Issue: 01 Determining the mounting location Information screen telling you to try a few locations to find the best signal 3TG-00387-ABBA-TCZZA 65
Determining the mounting location Figure 27 66 Nokia FastMile 4G Receiver Installation Guide Screen to start a signal strength measurement 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide Figure 28 Determining the mounting location Screen showing very strong signal When you have a signal strength measurement that is satisfactory, proceed by tapping on “Done”. 17 The Nokia Wireless app indicates that the Nokia FastMile 4G Receiver can now be installed. Figure 29 shows the screen showing that you are ready to install.
Determining the mounting location Figure 29 Nokia FastMile 4G Receiver Installation Guide Screen showing that you are ready to install Disconnect the portable battery-powered PoE injector from the Nokia FastMile 4G Receiver so that the Nokia FastMile 4G Receiver is powered off. Proceed by tapping on “Next”. 68 18 Use the camera of the mobile phone to take a photograph of the QR code that is on the sheet of paper included in the shipping package of the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide 10.3 Determining the mounting location Determining the mounting location for unit that will be managed by an ACS If an ACS will be used through TR-069 to remotely manage the Nokia FastMile 4G Receiver, use the following procedure to use the Nokia Wireless app, which works in conjunction with the Nokia FastMile 4G Receiver, to help you determine the mounting location for the Nokia FastMile 4G Receiver.
Determining the mounting location Figure 30 Nokia FastMile 4G Receiver Installation Guide Introductory screen for unit that will be managed by an ACS Continue by tapping on “Get started”. 2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the MAC address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide Figure 31 Determining the mounting location Screen with prompt to scan the QR code for unit that will be managed by an ACS Tap on “Scan” to start the scan of the QR code. Use the viewfinder of the phone to align with the QR code. Figure 32 shows the QR code screen.
Determining the mounting location Figure 32 3 Nokia FastMile 4G Receiver Installation Guide QR code screen for unit that will be managed by an ACS The Nokia Wireless app displays the screen to install the Nolia FastMile 4G Receiver. Tap on the “Install” option. Figure 33 shows the Install option.
Nokia FastMile 4G Receiver Installation Guide Figure 33 4 Determining the mounting location Screen showing the Install option for unit that will be managed by an ACS The Nokia Wireless app displays the screen to select the setup method. Tap on the “TR-069 without Controller” option. Figure 34 shows the TR-069 without Controller option.
Determining the mounting location Figure 34 5 Nokia FastMile 4G Receiver Installation Guide Screen showing the TR-069 without Controller option for unit that will be managed by an ACS The Nokia Wireless app prompts you to share your location so that you can register the Nokia FastMile 4G Receiver. Figure 35 shows the prompt to share your location.
Nokia FastMile 4G Receiver Installation Guide Figure 35 Determining the mounting location Screen for sharing location for unit that will be managed by an ACS Share your location by tapping on “Next”. 6 Unpack the Nokia FastMile 4G Receiver and connect a portable battery-powered PoE injector to the Ethernet cable (Compact mono-band and ABA models) or Ethernet port (Compact multi-band models) of the Nokia FastMile 4G so that the Nokia FastMile 4G Receiver powers up.
Determining the mounting location Figure 36 Nokia FastMile 4G Receiver Installation Guide Screen for connecting to the Nokia FastMile 4G Receiver Connect to the Nokia FastMile 4G Receiver by tapping on “Connect”. 8 The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 37 shows the screen to enable the VPN profile.
Nokia FastMile 4G Receiver Installation Guide Figure 37 Determining the mounting location Screen for enabling the VPN profile Enable the VPN profile by tapping on “Connect”. 9 The android system of the mobile phone prompts you to accept the connection request. Figure 38 shows the prompt to accept the connection request.
Determining the mounting location Figure 38 Nokia FastMile 4G Receiver Installation Guide Prompt for accepting the connection request Accept the connection request by tapping on “OK”. 10 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 39 shows the screen to log in to the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide Figure 39 Determining the mounting location Screen to log in to a Nokia FastMile 4G Receiver that will be managed by an ACS Log in to the Nokia FastMile 4G Receiver by tapping on “Log in”. 11 The Nokia Wireless app now sets up the Nokia FastMile 4G Receiver and shows when the set up is compete.
Determining the mounting location 12 Nokia FastMile 4G Receiver Installation Guide The Nokia Wireless app uses the signal strength measurement capability of the Nokia FastMile 4G Receiver to help you find a place to mount the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide Figure 40 Issue: 01 Determining the mounting location Information screen telling you to find a location where the Nokia FastMile 4G Receiver won’t be obstructed 3TG-00387-ABBA-TCZZA 81
Determining the mounting location Figure 41 82 Nokia FastMile 4G Receiver Installation Guide Information screen telling you to hold the Nokia FastMile 4G Receiver in place 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide Figure 42 Issue: 01 Determining the mounting location Information screen telling you to try a few locations to find the best signal 3TG-00387-ABBA-TCZZA 83
Determining the mounting location Figure 43 84 Nokia FastMile 4G Receiver Installation Guide Screen to start a signal strength measurement 3TG-00387-ABBA-TCZZA Issue: 01
Nokia FastMile 4G Receiver Installation Guide Figure 44 Determining the mounting location Screen showing very strong signal When you have a signal strength measurement that is satisfactory, proceed by tapping on “Done”. 13 The Nokia Wireless app indicates that the Nokia FastMile 4G Receiver can now be installed. Figure 45 shows the screen showing that you are ready to install.
Determining the mounting location Figure 45 Nokia FastMile 4G Receiver Installation Guide Screen showing that you are ready to install Disconnect the portable battery-powered PoE injector from the Nokia FastMile 4G Receiver so that the Nokia FastMile 4G Receiver is powered off. Proceed by tapping on “Next”. 86 14 Use the camera of the mobile phone to take a photograph of the QR code that is on the sheet of paper included in the shipping package of the Nokia FastMile 4G Receiver.
Nokia FastMile 4G Receiver Installation Guide Mounting and connecting the Nokia FastMile 4G Receiver 11 Mounting and connecting the Nokia FastMile 4G Receiver 11.1 Overview 11.2 Mounting and connecting the Nokia FastMile 4G Receiver 11.1 Overview After you have determined the mounting location for the Nokia FastMile 4G Receiver as described in chapter 10, you can mount the Nokia FastMile 4G Receiver on a wall or pole, and make connections to it as described in this chapter.
Mounting and connecting the Nokia FastMile 4G Receiver Figure 47 Nokia FastMile 4G Receiver Installation Guide Location of physical interfaces on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver Vent M6 Ethernet port SIM slot Reset button 28771 11.2 Mounting and connecting the Nokia FastMile 4G Receiver This section describes how to mount all models of the Nokia FastMile 4G Receiver on a wall or pole, and make all physical connections.
Nokia FastMile 4G Receiver Installation Guide Procedure 9 To mount and connect the Nokia FastMile 4G Receiver 1 Confirm that the location identified in chapter 10 is suitable for considerations within the home, and that Ethernet cabling can be safely and securely run from the mounting location though the wall, and inside the home to the residential gateway or PoE injector, or to the prospective residential gateway or PoE injector location. The PoE injector must be a Nokia-approved PoE injector.
Mounting and connecting the Nokia FastMile 4G Receiver Figure 48 Nokia FastMile 4G Receiver Installation Guide Attaching the mounting plate to the Nokia FastMile 4G Receiver Install the screws 28801 90 5 As appropriate, drill a hole through the wall for the Ethernet cable to be able to pass through. It is recommended that you drill the hole for the Ethernet cable at a slight angle so that any water that might enter the hole will run down towards the outside of the home.
Nokia FastMile 4G Receiver Installation Guide Figure 49 Mounting and connecting the Nokia FastMile 4G Receiver Attaching the receiver bracket to a wall 28803 8 If you are pole-mounting the Nokia FastMile 4G Receiver, attach the receiver bracket to the pole adapter as shown in Figure 50.
Mounting and connecting the Nokia FastMile 4G Receiver Figure 51 Nokia FastMile 4G Receiver Installation Guide Attaching the receiver bracket and pole adapter to a pole 28805 10 Line up the mounting plate (attached earlier on the back of the Nokia FastMile 4G Receiver) with the receiver bracket and temporarily secure the Nokia FastMile 4G Receiver in place with the three saved fasteners: • • 92 Figure 52 shows one of the fasteners already in place for a wall-mount installation Figure 53 shows one o
Nokia FastMile 4G Receiver Installation Guide Figure 52 Mounting and connecting the Nokia FastMile 4G Receiver Mounting the Nokia FastMile 4G Receiver on a wall Wall 28806 Figure 53 Mounting the Nokia FastMile 4G Receiver on a pole Pole 28807 Issue: 01 3TG-00387-ABBA-TCZZA 93
Mounting and connecting the Nokia FastMile 4G Receiver 11 Nokia FastMile 4G Receiver Installation Guide Rotate the Nokia FastMile 4G Receiver +/-35 degrees horizontally so that it faces the direction of the LTE base station that was determined in chapter 10, and tighten the fasteners to securely hold the Nokia FastMile 4G Receiver in place.
Nokia FastMile 4G Receiver Installation Guide Mounting and connecting the Nokia FastMile 4G Receiver iii Connect the male RJ 45 connector to the Ethernet port of the Nokia FastMile 4G Receiver. iv Slide the waterproof plug and gland to the Ethernet port of the Nokia FastMile 4G Receiver and tighten securely to the port.
Mounting and connecting the Nokia FastMile 4G Receiver Figure 55 Nokia FastMile 4G Receiver Installation Guide Location of ports on a PoE injector POWER ACTIVE LAN POE LAN port PoE port 27902 17 Connect the Nokia FastMile 4G Receiver to the residential gateway or PoE injector: If the outside Ethernet cable is longer than 20 meters (64 feet), you will need to use a PoE+ capable surge protector in front of the residential gateway or PoE injector for lightning protection, subject to local regulations.
Nokia FastMile 4G Receiver Installation Guide Figure 56 Mounting and connecting the Nokia FastMile 4G Receiver Location of the Status LED on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Status LED 28799 Figure 57 Location of the status LED on the Compact multi-band models of the Nokia FastMile 4G Receiver Status LED 28772 The status LED behaves differently depending on whether the Nokia FastMile 4G Receiver will be remotely managed from: • • the Nokia Altiplano FastMile C
Mounting and connecting the Nokia FastMile 4G Receiver Nokia FastMile 4G Receiver Installation Guide LED color LED priority LED behavior Status information Green Third priority Blinking twice per second Kernel and application start up Blinking one per second Application start up Solid Start up Off OAM link is established (2 of 2) Table 7 LED color LED priority LED behavior Status information Blue First priority Blinking Bluetooth connection in progress Solid Bluetooth connection e
Nokia FastMile 4G Receiver Installation Guide Figure 58 Mounting and connecting the Nokia FastMile 4G Receiver Location of the measurement button Measurement button 28885 Figure 59 shows the location of the signal strength LEDs. Figure 59 Location of the signal strength LEDs Signal strength LEDs 28773 After the Nokia FastMile 4G Receiver receives power, all five signal strength LEDs turn on for five seconds and then turn off.
Mounting and connecting the Nokia FastMile 4G Receiver Nokia FastMile 4G Receiver Installation Guide Stop the measurement by pressing the measurement button. When the Nokia FastMile 4G Receiver attaches to a cell, the number of LEDs that correspond to the signal strength level will be on continuously. Caution — This step only measures signals, and indicates the signal strength level of the best signal in the direction, during measurement when the Nokia FastMile 4G Receiver is not attached to a cell.
Nokia FastMile 4G Receiver Installation Guide Troubleshooting 12 Troubleshooting 12.1 Overview 12.2 Subscriber has been registered to a different location 12.3 Further installation prevented 12.4 SIM not inserted 12.5 Failed to connect to the LTE network 12.6 Cannot attach to LTE network due to hardware mismatch 12.7 The receiver cannot be installed at this position 12.8 This subscription ID is not provisioned by the Fastmile Controller 12.
Troubleshooting Nokia FastMile 4G Receiver Installation Guide See section 12.7 for information about installing a Nokia FastMile 4G Receiver outside its registered location. 12.3 Further installation prevented The system will prevent further installation of the Nokia FastMile 4G Receiver after the initial installation is completed for a Nokia FastMile 4G Receiver that is managed by the Nokia Altiplano FastMile Controller. 12.
Nokia FastMile 4G Receiver Installation Guide Troubleshooting Note that the subscriber registered to the Nokia Fastmile 4G Receiver cannot be registered if the Nokia Fastmile 4G Receiver is outside its registered location. See section 12.2 for information about registering a user for a Nokia FastMile 4G Receiver that is outside its registered location. 12.
Troubleshooting Nokia FastMile 4G Receiver Installation Guide If another LTE Radio Base Station is available, the Nokia FastMile 4G Receiver will attach to it through it cell re-selection process. 12.12 Trace request The Nokia FastMile 4G Receiver has a trace and log function that can be used for troubleshooting purposes and for help in performing root cause analysis.
Nokia FastMile 4G Receiver Installation Guide Glossary 13 Glossary This glossary provides the expansions and optional descriptions of most acronyms and initialisms that appear in this document.
Glossary Nokia FastMile 4G Receiver Installation Guide IEEE Institute of Electrical and Electronics Engineers IP International Protection or Internet Protocol LAN Local Area Network LED Light Emitting Diode LTE Long-Term Evolution MAC Media Access Control MCV Maximum Concentration Value or Minimum Concentration Value MIMO Multiple-Input Multiple-Output MME Mobility Management Entity NAC Network Access Control NEC National Electrical Code OAM Operations and Maintenance PCI Physical
Nokia FastMile 4G Receiver Installation Guide TDD Time Division Duplex UDP User Datagram Protocol UL Underwriters’ Laboratories URL Uniform Resource Locater VDC Volts Direct Current VPN Virtual Private Network WiFi Wireless Fidelity ZIP Compressed File Issue: 01 3TG-00387-ABBA-TCZZA Glossary 107
Glossary 108 Nokia FastMile 4G Receiver Installation Guide 3TG-00387-ABBA-TCZZA Issue: 01
Customer document and product support Customer documentation Customer Documentation Welcome Page Technical Support Customer Documentation Technical Support Documentation feedback Customer Documentation Feedback
Copyright 2019 Nokia.