User's Manual

ManualsBrandsNokia Solutions and Networks ManualsElectronicsFXCA

Flexi Multiradio BTS GSM/EDGE

Stack, Wall, and Pole Quick Guide

Installing module

front covers

Front panel

Installation

Grounding

the modules

This guide can be used as quick reference for Flexi Multiradio BTS GSM/EDGE installation.

Flexi Multiradio BTS GSM/EDGE is a modular base station for GSM/EDGE capacity and coverage.

It can be installed stacked on the floor, or mounted on the wall or on the pole.

This quick guide is for basic stack, wall and pole configurations with 48V DC input power. The

basic installation consists of one System Module (ESMB/C) and one RF Module (Fxxx) allowing

1+1+1 up to 6+6+6 configurations depending on the TRX output power.

For all other installation options, see the user manuals.

Installing

modules

Check the delivery

Contents of

delivery

Clearances

Check the site

Installation

Installing the

plinth

Plinth on the

floor, wall, or pole

Installation

Installing the

casings

Cabling

Cable routing and cable ties

External power

Internal power cables

Antenna cabling

Optical cables

Transmission and Alarm

cables

Commission BTS

Power up and

commissioning

the BTS

Module

installation

principle

Installation

Grounding

the plinth

Installation

Grounding

principle

Grounding

principle

Installation

example

Casing

installation

principle

Summary of content (4 pages)

PAGE 1
Flexi Multiradio BTS GSM/EDGE Stack, Wall, and Pole Quick Guide This guide can be used as quick reference for Flexi Multiradio BTS GSM/EDGE installation. Flexi Multiradio BTS GSM/EDGE is a modular base station for GSM/EDGE capacity and coverage. It can be installed stacked on the floor, or mounted on the wall or on the pole. This quick guide is for basic stack, wall and pole configurations with 48V DC input power.
PAGE 2
The information in this document is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia Siemens Networks customers only for the purposes of the agreement under which the document is submitted, and no part of it may be used, reproduced, modified or transmitted in any form or means without the prior written permission of Nokia Siemens Networks.
PAGE 3
1 Contents of delivery De live ry Syste m m o du le C on ten ts o f de live ry Ve rs io n Pr od u ct c o de F lexi Multira dio B TS GSM/ED GE Sys te m Mo d ule Qua n tity 1 ES MB ES MC 4 7 21 0 9 4 7 20 5 9 Ba g R eclo s ab le (15 0 x 2 25 / 2 00 x 2 6 0 ) 0 .
PAGE 4
2 Clearances Minimum clearances min 80 mm (3.2 in.) min 30 mm with no back access (1.2 in.) min 80 mm (2.4 in.) 600 mm (23.6 in) min 100 mm (3.9 in.) min 75 mm (3.0 in.) 400 mm (15.7 in) recommended space for hand tying 150 mm (5.9 in.) Check list Note: In a stack, the minimum side clearance is 75 mm (3 in.). The recommended clearance for hand tying is 150mm (5.9 in.) Site meets the minimum clearances. Plinth on the floor Facility wall 3 Installing the plinth 1.