Nokia WiFi Beacon 6 Product Guide Nokia WiFi Beacon 6 HA-0336G-A WiFi Beacon Nokia WiFi Beacon 6 Product Guide 3FE-xxxxx-AAAA-TCZZA Issue: 01
Nokia WiFi Beacon 6 Product Guide Nokia — Proprietary and confidential Use pursuant to applicable agreements Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of their respective owners. The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein. © 2019 Nokia.
Nokia WiFi Beacon 6 Product Guide Preface 1 Preface This preface provides general information about the documentation set for Beacon 6 (HA-0336G-A) equipment. 1.1 Scope This documentation set provides information about safety, features and functionality, ordering, hardware installation and maintenance, and software installation procedures for the current release. 1.
Preface Nokia WiFi Beacon 6 Product Guide 1.6 Nokia quality processes Nokia’s BEACON 6 quality practices are in compliance with TL 9000 requirements. These requirements are documented in the Fixed Networks Quality Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and customer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations 1.
Nokia WiFi Beacon 6 Product Guide Preface Individual PDFs of customer documents are also accessible through the Nokia Customer Support website. 1 Navigate to http://customer.nokia.com/s/ and enter your user name and password. If you are a new user and require access to this service, please contact your Nokia sales representative. 2 From the Technical Content for drop-down menu, choose the product. 3 Click on Manuals and Guides to display a list of customer documents by title and part number.
Preface Nokia WiFi Beacon 6 Product Guide Note — A note provides information that is, or may be, of special interest. 1.9.1 Procedures with options or substeps When there are options in a procedure, they are identified by letters. When there are required substeps in a procedure, they are identified by roman numerals. Procedure 3 Example of options in a procedure At step 1, you can choose option a or b. At step 1, you must do what the step indicates. 1 2 Procedure 4 This step offers two options.
Nokia WiFi Beacon 6 Product Guide Preface 1.10 Multiple PDF document search You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single display panel. The results are grouped by PDF file, and you can expand the entry for each file. Note — The PDF files in which you search must be in the same folder. Procedure 5 To search multiple PDF files for a common term 1 Open Adobe Acrobat Reader.
Nokia WiFi Beacon 6 Product Guide Table of contents 1 Preface .................................................................................................................. 3 1.1 Scope ............................................................................................................................... 3 1.2 Audience .......................................................................................................................... 3 1.3 Required knowledge ...............................
Nokia WiFi Beacon 6 Product Guide 4.1.2 Environmental related labels ...................................................................................... 27 4.1.2.1 Products below Maximum Concentration Value (MCV) label ................................. 27 4.1.2.2 Products containing hazardous substances above Maximum ............................... 28 Concentration Value (MCV) label .............................................................. 28 4.2 Hazardous Substances Table (HST)....................
Nokia WiFi Beacon 6 Product Guide 8.1.2 Device and connection status ..................................................................................... 55 8.1.3 Network configuration ................................................................................................. 66 8.1.4 Security configuration ................................................................................................. 90 8.1.5 Application configuration...............................................................
Nokia WiFi Beacon 6 Product Guide Issue: 01 3FE-47429-AAAA-TCZZA 11
Nokia WiFi Beacon 6 Product Guide List of figures 2 ANSI BEACON 6 guidelines.........................................................17 Figure 1 Sample safety label...................................................................................19 3 ETSI BEACON 6 guidelines .........................................................23 Figure 2 Sample safety label...................................................................................26 4 ETSI environmental and CRoHS guidelines..........
Nokia WiFi Beacon 6 Product Guide Issue: 01 Figure 25 Figure 26 Figure 27 Figure 28 Figure 29 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 WAN window - Bridge Mode......................................................................80 WAN DHCP window..................................................................................82 Wireless 2.4GHz network window.............................................................84 Wireless 5GHz network window..............................................
Nokia WiFi Beacon 6 Product Guide List of tables 2 ANSI BEACON 6 guidelines.........................................................17 Table 1 Safety labels..............................................................................................18 3 ETSI BEACON 6 guidelines .........................................................23 Table 2 Table 3 Safety labels..............................................................................................24 Safety labels.........................
Nokia WiFi Beacon 6 Product Guide Table 30 Table 31 Table 32 Table 33 Table 34 Table 35 Table 36 Table 37 Table 38 Table 39 Table 40 Table 41 Issue: 01 Firewall parameters...................................................................................99 MAC filter parameters..............................................................................101 IP filter parameters..................................................................................103 URL Filter parameters......................
ANSI CPE safety guidelines Nokia WiFi Beacon 6 Product Guide 2 ANSI BEACON 6 safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of devices in the North American or ANSI market. 2.1 Safety instructions This section describes the safety instructions that are provided in the BEACON 6 customer documentation and on the equipment. 2.1.
Nokia WiFi Beacon 6 Product Guide ANSI CPE safety guidelines Do not proceed beyond a warning until the indicated conditions are fully understood and met. The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met.
ANSI CPE safety guidelines Figure 1 2.2 Nokia WiFi Beacon 6 Product Guide Beacon 6 safety label Safety standards compliance This section describes the BEACON 6 compliance with North American safety standards. Warning — Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.2.
Nokia WiFi Beacon 6 Product Guide ANSI CPE safety guidelines reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
ANSI CPE safety guidelines Nokia WiFi Beacon 6 Product Guide can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 2.2.
Nokia WiFi Beacon 6 Product Guide ANSI CPE safety guidelines 2.3 Electrical safety guidelines This section provides the electrical safety guidelines for the Beacon 6. Beacon 6 (HA-0336G-A) devices are compliant with the following standards • IEC 62368-1 • UL 62368-1 Note — The devices comply with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. 2.3.
ETSI CPE safety guidelines Nokia WiFi Beacon 6 Product Guide 3 ETSI BEACON 6 safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of devices. 3.1 Safety instructions This section describes the safety instructions that are provided in the BEACON 6 customer documentation and on the equipment. 3.1.1 Safety instruction boxes The safety instruction boxes are provided in the BEACON 6 customer documentation.
Nokia WiFi Beacon 6 Product Guide ETSI CPE safety guidelines The following is an example of the Caution box. Caution 1 — Possibility of service interruption. Caution 2 — Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note — Information of special interest.
ETSI CPE safety guidelines Nokia WiFi Beacon 6 Product Guide Figure 2 Beacon 6 label (ETSI variants) 3.2 Safety standards compliance This section describes the BEACON 6 compliance with the European safety standards. 3.2.1 EMC, EMI, and ESD compliance The Beacon 6 complies with the following EMC, EMI, and ESD requirements: • EN 300-386 V1.6.
Nokia WiFi Beacon 6 Product Guide ETSI CPE safety guidelines • EN 55032 (2015): Electromagnetic compatibility of multimedia equipment • • • • 3.2.
ETSI CPE safety guidelines 3.2.6 Nokia WiFi Beacon 6 Product Guide Acoustic noise emission standard compliance The Beacon 6 complies with EN 300 753 acoustic noise emission limit and test methods. 3.3 Electrical safety guidelines This section provides the electrical safety guidelines for the Beacon 6. Note — The devices comply with BS EN 61140. 3.3.1 Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia.
Nokia WiFi Beacon 6 Product Guide ETSI environmental and CRoHS guidelines 4 ETSI environmental and CRoHS guidelines This chapter provides information about the ETSI environmental China Restriction of Hazardous Substances (CRoHS) regulations that govern the installation and operation of devices. This chapter also includes environmental operation parameters of general interest. 4.
ETSI environmental and CRoHS guidelines Nokia WiFi Beacon 6 Product Guide Concentration Limits for Certain Hazardous Substances in Electronic Information Products). Products with this label are recyclable. The label may be found in this documentation or on the product. Figure 3 Products below MCV value label 18986 4.1.2.
Nokia WiFi Beacon 6 Product Guide Figure 4 ETSI environmental and CRoHS guidelines Products above MCV value label 18985 Together with major international telecommunications equipment companies, Nokia has determined it is appropriate to use an EFUP of 50 years for network infrastructure equipment and an EFUP of 20 years for handsets and accessories.
ETSI environmental and CRoHS guidelines 4.2 Nokia WiFi Beacon 6 Product Guide ETSI environmental requirements Observe the following environmental requirements when handling BEACON 6 4.2.1 BEACON 6 environmental requirements See the BEACON 6 technical specification documentation for more information about temperature ranges. 4.2.2 Transportation According to EN 300-019-1-2 - Class 2.3, transportation of the equipment must be in packed, public transportation with no rain on packing allowed. 4.2.
Nokia WiFi Beacon 6 Product Guide ETSI environmental and CRoHS guidelines the environment and human health may be negatively impacted as a result of inappropriate disposal. Note — In the European Union, a solid bar under the symbol for a crossed-out wheeled bin indicates that the product was put on the market after 13 August 2005. Figure 5 Recycling/take back/disposal of product symbol About mark is used in compliance to European Union WEEE Directive (2012/19/EU).
Beacon 6 (HA-0336W-B) unit data sheet Nokia WiFi Beacon 6 Product Guide 5 Beacon 6 (HA-0336G-A) unit data sheet 5.1 Beacon 6 (HA-0336G-A) part numbers and identification 5.2 Beacon 6 (HA-0336G-A) general description 5.3 Beacon 6 (HA-0336G-A) software and installation feature support 5.4 Beacon 6 (HA-0336G-A) interfaces and interface capacity 5.5 Beacon 6 (HA-0336G-A) LEDs 5.6 Beacon 6 (HA-0336G-A) detailed specifications 5.7 Beacon 6 (HA-0336G-A) functional blocks 5.
Nokia WiFi Beacon 6 Product Guide Beacon 6 (HA-0336W-B) unit data sheet 3FE48065CA 3FE 47429 BA Nokia WiFi Beacon 6 (HA-0336G-A), AX4200,UK plug, UK variant, 2 pack. — — — 3FE48064DA 3FE 47429 DA Nokia WiFi Beacon 6 (HA-0336G-A), AX4200,AU plug, UK variant, 1 pack. — — — 3FE48065DA 3FE 47429 DA Nokia WiFi Beacon 6 (HA-0336G-A), AX4200,AU plug, UK variant, 2 pack. — — — Table 5 Table 5 provides power supply ordering information for the Beacon 6 (HA-0336G-A).
Beacon 6 (HA-0336W-B) unit data sheet Nokia WiFi Beacon 6 Product Guide mesh network with easy device onboarding and automated network optimization enhanced by easymesh. The overall Nokia WiFi solution is composed of one Nokia WiFi gateway (or Nokia WiFi beacon) as root AP, one or more Nokia WiFi beacons, the Nokia WiFi Care Portal for the operator’s customer care team, and a mobile application for the enduser’s self care. Note — The Nokia WiFi Care Portal can be accessed by the end user and the operator.
Nokia WiFi Beacon 6 Product Guide Beacon 6 (HA-0336W-B) unit data sheet • Tri-band Wifi6: concurrent IEEE 802.11b/g/n/ax 2x3 2.4 GHz, 802.11 a/n/ac/ax • • • • • • • 2x2 5.2 GHz, and 802.11 a/n/ac/ax 4x4 5.8 GHz Automatically decide on wireless router mode and beacon mode in a mesh network Three 10/100/1000Base-T interface with RJ-45 connectors One USB 3.1(gen1) Nokia intelligent Easy Mesh Embedded edge analytics optimize network performance in real-time UPnP IGD1.
Beacon 6 (HA-0336W-B) unit data sheet interfaces Nokia WiFi Beacon 6 Product Guide • • • • • Three RJ45 Gigabit Ethernet LAN ports; one can be used as Ethernet backhaul link • • • WPA support including WPA2 and WPA3 Personal and Enterprise encryption Supports 2x2 802.11a/b/g/n/ac/ax 2.4 GHz wireless LAN (WLAN) interface Supports 2x2 802.11a/b/g/n/ac/ax 5.2 GHz wireless LAN (WLAN) interface Supports 4x4 802.11a/b/g/n/ac/ax 5.
Nokia WiFi Beacon 6 Product Guide 5.2.1 Beacon 6 (HA-0336W-B) unit data sheet TR-069 object support for WiFi parameters The Beacon 6 (HA-0336G-A) supports the status retrieval and configuration of the following WiFi parameters via TR-069: • • • • channel SSID password for WPA and WEP Tx power (transmission rate in dBm) These are the same TR-069 object parameters that are supported in the GUI. For more information, see Tables 23 and 24 in the chapter “Configure a Beacon 6 (HA0336G-A)”. 5.2.
Beacon 6 (HA-0336W-B) unit data sheet Table 7 Nokia WiFi Beacon 6 Product Guide Beacon 6 (HA-0336G-A) interface connection capacity Device type and model Maximum capacity POTS 10/ 100 BASE-T 10/ 100/1000 BASE-T RF video (CATV) MoCA VDSL2 E1/T1 Local craft USB3.1(gen1) Beacon 6 (HA-0336GA) — — 3 — — — — — 1 5.4.1 Beacon 6 (HA-0336G-A) connections and components Figure 7 shows the physical connections for Beacon 6 (HA-0336G-A).
Nokia WiFi Beacon 6 Product Guide Beacon 6 (HA-0336W-B) unit data sheet Reset button Pressing the Reset button for less than 10 seconds reboots the Beacon; pressing the Reset button for 10 seconds or more restores the Beacon to its factory defaults. Power input This connection is provided through the power connector. A power cable fitted with a barrel connector is used to make the connection. 5.
Beacon 6 (HA-0336W-B) unit data sheet Nokia WiFi Beacon 6 Product Guide Width 160 mm (6.30 in.) Height 205 mm (8.07in.) Weight [within ± 0.5 lb (0.23 kg)] 766.0 g (1.69 lb) Table 11 lists the power consumption specifications for the Beacon 6 (HA-0336GA).
Nokia WiFi Beacon 6 Product Guide Figure 8 Beacon 6 (HA-0336W-B) unit data sheet Single-residence WiFi BEACON 6 with Gigabit Ethernet 28285 5.8 Beacon 6 (HA-0336G-A) special considerations This section describes the special considerations for Beacon 6 (HA-0336G-A) devices. 5.8.1 WiFi service Beacon 6 (HA-0336G-A) devices feature WiFi service as well as data services. WiFi is a wireless networking technology that uses radio waves to provide wireless HSI and network connections.
Beacon 6 (HA-0336W-B) unit data sheet • • • • • 5.8.1.2 Nokia WiFi Beacon 6 Product Guide WPA support including WPA-PSK certified for WPA2-Personal and WPA2-Enterprise certified for WPA3 certified for WMM, WMM-PS certified for Easymesh Nokia WiFi app configuration The Nokia WiFi mobile app can be used to set up the Beacon 6 (HA-0336G-A) and manage the network. It can be downloaded from the App Store for iOS (https://apps.apple.
Nokia WiFi Beacon 6 Product Guide Install a Beacon 6 (HA-0336G-A) 6 Install a Beacon 6 (HA-0336G-A) 6.1Purpose 6.2 General 6.3 Prerequisites 6.4 Recommended tools 6.5 Safety information 6.6 Procedure 6.1 Purpose This chapter provides the steps to install a Beacon 6 (HA-0336G-A). 6.2 General The steps listed in this chapter describe installing and cabling for a Beacon 6 (HA0336G-A). 6.
Nokia WiFi Beacon 6 Product Guide 6.4 Recommended tools You need the following tools for the installation: • RJ-45 cable • paper clip Install a Beacon 6 (HA-0336G-A) 6.5 Safety information Read the following safety information before installing the unit. Danger 1 — Hazardous electrical voltages and currents can cause serious physical harm or death. Always use insulated tools and follow proper safety precautions when connecting or disconnecting power circuits.
Nokia WiFi Beacon 6 Product Guide Note 1 — Observe the local and national laws and regulations that may be applicable to this installation. Note 2 — Observe the following: • The device should be installed in accordance with the applicable requirements of the NEC or CEC. Local authorities and practices take precedent when there is conflict between the local standard and the NEC or CEC. • The device must be installed by qualified service personnel.
Nokia WiFi Beacon 6 Product Guide Figure 9 Beacon 6 (HA-0336G-A) connections 28231 3 Connect the Ethernet cables to the RJ-45 ports; see Figure 9 for the location of the RJ-45 ports. 4 Connect the WAN cable to the RJ-45 WAN port; see Figure 9 for the location of the RJ-45 WAN port. Install a Beacon 6 (HA-0336G-A) 5 Connect the power cable to the power connector.
Nokia WiFi Beacon 6 Product Guide 7 Verify the LEDs and voltage status. 8 Activate and test the services. 9 If necessary, reset the Beacon 6 (HA0336G-A). Note — return all settings to factory customization will be lost. 10 default Resetting the device will values; any configuration i Locate the Reset button as shown in Figure 9. ii Insert the end of a straightened paper clip or other narrow object into the hole in the Reset button to reset the device. STOP. This procedure is complete.
Nokia WiFi Beacon 6 Product Guide This chapter provides the steps to replace a Beacon 6 (HA-0336G-A). 7.2 General The steps listed in this chapter describe mounting and cabling for a Beacon 6 (HA0336G-A). 7.3 Prerequisites You need the following items before beginning the installation: • all required cables 7.4 Recommended tools You need the following tools for replacing the Beacon 6 (HA-0336G-A): • RJ-45 cable • paper clip Replace a Beacon 6 (HA-0336G-A) 7.
Nokia WiFi Beacon 6 Product Guide Danger 2 — Make sure all sources of power are turned off and have no live voltages present on feed lines or terminals. Use a voltmeter to measure for voltage before proceeding. Always contact the local utility company before connecting the enclosure to the utilities. Danger 3 — Caution — Keep indoor devices out of direct sunlight. Prolonged exposure to direct sunlight can damage the unit.
Nokia WiFi Beacon 6 Product Guide 1 Power down the unit by using the on/off power switch. See Figure 10 for the connections on the Beacon 6 (HA-0336G-A). Figure 10 Beacon 6 (HA-0336G-A) connections ON/OFF ON/OFF RESET RESET WPS LAN 1 LAN 2 WAN LAN 3 WPS LAN 1 LAN 2 WAN LAN 3 POWER POWER 28231 2 Disconnect the WAN, Ethernet, and power cables from the Beacon 6 (HA0336G-A); see Figure 10 for the connector locations on the Beacon 6 (HA-0336G-A).
Nokia WiFi Beacon 6 Product Guide Note — Observe the following: • Units must be powered by a Listed or CE approved and marked limited power source with a minimum output rate of 12 V dc, 2 A. The polarity of the power adapter plug must match the Beacon 6 (HA-0336G-A). 7 Power up the unit by using the On/Off power button. 8 Verify the LEDs and voltage status. 9 Activate and test the services. 10 If necessary, reset the Beacon 6 (HA-0336G-A).
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide 8 Configure a Beacon 6 (HA-0336G-A) 8.1 GUI configuration 8.1 GUI configuration Use the procedures below to use the web-based GUI for the Beacon 6 (HA-0336G-A). The Beacon 6 (HA-0336G-A) is used as an Ethernet gateway to connect devices in the home to the Internet. The GUI provides a variety of features for the home network including routing and firewall capability.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) Figure 13 shows the Beacon 6 (HA-0336G-A) factory default mode for the web-based GUI dashboard. Figure 13 Beacon 6 (HA-0336G-A) web-based GUI dashboard—Factory default mode 8.1.1 Login Use the procedure below to login to the web-based GUI for the Beacon 6 (HA-0336G-A). Procedure 6 1 Login to web-based GUI Open a web browser and enter the IP address of the Beacon 6 (HA-0336G-A) in the address bar. The login window appears.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide The default gateway IP address is http://192.168.18.1. You can connect to this IP address using your web browser after connecting your PC to one of Ethernet ports of the Beacon 6 (HA-0336GA). The static IP address of your PC must be in the same 192.168.18.x subnet as the Beacon 6 (HA-0336G-A). 2 Enter your username and password in the Log in window, as shown in Figure 14. The default user name is admin.
Nokia WiFi Beacon 6 Product Guide Figure 15 3 Configure a Beacon 6 (HA-0336W-B) Web login window—password hint Click Login. The Device Information screen appears. Note — To help protect the security of your Internet connection, the application displays a pop-up reminder to change both the WiFi password and the Beacon 6 (HA-0336G-A) password. To increase password security, use a minimum of 10 characters, consisting of a mix of numbers and upper and lowercase letters. 4 8.1.2 STOP.
Configure a Beacon 6 (HA-0336W-B) • statistics Procedure 7 Nokia WiFi Beacon 6 Product Guide Device information retrieval 1 Select Status > Device Information from the top-level menu in the Ethernet Gateway window, as shown in Figure 16. Figure 16 Device Information window Table 13 describes the fields in the Device Information window.
Nokia WiFi Beacon 6 Product Guide 3 Configure a Beacon 6 (HA-0336W-B) STOP. This procedure is complete.
Configure a Beacon 6 (HA-0336W-B) Procedure 8 1 58 Nokia WiFi Beacon 6 Product Guide LAN status retrieval Select Status > LAN Status from the top-level menu in the Ethernet Gateway window, as shown in Figure 17.
Nokia WiFi Beacon 6 Product Guide Figure 17 Configure a Beacon 6 (HA-0336W-B) LAN status window Table 14 describes the fields in the LAN status window.
Configure a Beacon 6 (HA-0336W-B) Table 14 Field Nokia WiFi Beacon 6 Product Guide LAN status parameters Description LAN Wireless Info Wireless Status Indicates whether the wireless is on or off Wireless Channel Wireless channel number SSID Name Name of each multilingual SSID Wireless Encryption Status Encryption type used on the wireless connection Wireless Rx Packets Number of packets received on the wireless connection Wireless Tx Packets Number of packets transmitted on the wireless conn
Nokia WiFi Beacon 6 Product Guide Figure 18 Configure a Beacon 6 (HA-0336W-B) WAN Status window Table 15 describes the fields in the WAN Status window. Table 15 WAN Status parameters Field Description WAN connection list Drop-down menu listing all WAN connections. The connection shown is the connection for which WAN status will be shown.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide Tx Dropped Number of packets dropped on the transmit WAN connection Rx Dropped Number of packets dropped on the receive WAN connection Err Packets Number of errored packets on the WAN connection (2 of 2) 2 Click Refresh to update the displayed information. 3 STOP. This procedure is complete.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) WAN connection list Drop-down menu listing all WAN connections. The connection selected is the connection for which WAN status will be shown.
Configure a Beacon 6 (HA-0336W-B) Figure 20 Nokia WiFi Beacon 6 Product Guide Home Networking information window Table 17 describes the fields in the Home Networking window. Table 17 Field Home Networking parameters Description LAN Wireless Info Ethernet Table displays the number of Ethernet connections and their settings Wireless Table displays the number of wireless connections and their settings Wireless Settings (2.
Nokia WiFi Beacon 6 Product Guide Table entry Configure a Beacon 6 (HA-0336W-B) Each entry indicates the status (active or inactive), connection type, device name, IP address, hardware address, and IP address allocation, lease remaining, and last active time of each connected local device. (2 of 2) 2 Click Delete to delete a particular local device connection. 3 Click Refresh to update the displayed information. 4 STOP. This procedure is complete.
Configure a Beacon 6 (HA-0336W-B) Figure 21 Nokia WiFi Beacon 6 Product Guide LAN ports statistics window 2 Click Refresh to update the displayed information. 3 STOP. This procedure is complete. 8.1.
Nokia WiFi Beacon 6 Product Guide • • • • • • • • • • • LAN IPv6 WAN WAN DHCP Wireless 2.4GHz Wireless 5GHz Wireless Schedule IP routing DNS TR-069 QoS Configuration Mesh Procedure 13 1 Issue: 01 Configure a Beacon 6 (HA-0336W-B) LAN configuration Select Network > LAN from the top-level menu in the Ethernet Gateway window, as shown in Figure 22.
Configure a Beacon 6 (HA-0336W-B) Figure 22 Nokia WiFi Beacon 6 Product Guide LAN settings window Table 18 describes the fields in the LAN window.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) Static DHCP MAC Address Hexadecimal MAC address to associate to the LAN IPv4 Address IP address to associate to the bound MAC address 2 Configure the LAN. 3 Click Save. 4 Bind a MAC address to the LAN by entering the MAC and IP addresses in the Static DHCP Entry fields and then clicking Add. Repeat for all MAC addresses to be bound.
Configure a Beacon 6 (HA-0336W-B) Table 19 Nokia WiFi Beacon 6 Product Guide LAN IPv6 network parameters Field Description IPv6 LAN Host Configuration DNS Server Choose a DNS server from the drop-down menu Prefix Config Choose a prefix config option from the drop-down menu, either WANConnection (prefix will be obtained from the WAN) or Static (enables you to enter the prefix). Prefix This field appears if you selected the “Static” option for the “prefix config” field. Type a connection.
Nokia WiFi Beacon 6 Product Guide Procedure 15 Configure a Beacon 6 (HA-0336W-B) WAN configuration 1 Select Network > WAN from the top-level menu in the Ethernet Gateway window, as shown in Figure 24 and Figure 25. The fields visible on screen change according to the Connection Mode: Route Mode or Bridge Mode. Figure 24 Figure 25 WAN window - Route Mode WAN window - Bridge Mode Tables 20 and 21 describe the fields in the WAN window.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide Connection Type Select a connection type: IPoE or PPPoE Connection Mode Choose the connection mode from the drop-down menu; either Route mode or Bridge mode IP Mode Choose an IP mode from the drop-down menu: IPv4 or IPv6 Enable/Disable Select this checkbox to enable the WAN connection NAT Select this checkbox to enable NAT Service Select the checkboxes to enable service types for this connection Enable VLAN Select this checkb
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) 3 Click Save. 4 STOP. This procedure is complete. Procedure 16 WAN DHCP configuration 1 Select Network > WAN DHCP from the top-level menu in the Ethernet Gateway window, as shown in Figure 26. Figure 26 WAN DHCP window Table 22 describes the fields in the WAN DHCP window.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide Field Description Enable DHCP Option 61 Select this checkbox to enable DHCP Option 61 (client identifier) (2 of 2) 2 Configure a WAN DHCP option. 3 Click Save. 4 STOP. This procedure is complete.
Nokia WiFi Beacon 6 Product Guide Procedure 17 Configure a Beacon 6 (HA-0336W-B) Wireless 2.4G networking configuration 1 Select Network > Wireless 2.4GHz from the top-level menu in the Ethernet Gateway window, as shown in Figure 27. Figure 27 Wireless 2.4GHz network window Table 23 describes the fields in the Wireless 2.4GHz network window. Table 23 Field Wireless 2.4GHz network parameters Description Wireless (2.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide Enable Select this checkbox to enable WiFi Mode Choose a WiFi mode from the drop-down menu: • • • • • auto (b/g/n) b g n b/g Bandwidth Choose 20 MHz or 40 MHz from the drop-down menu.
Nokia WiFi Beacon 6 Product Guide WPS Mode Configure a Beacon 6 (HA-0336W-B) Select a WPS mode from the drop-down menu: • • • PBC (Push Button Connect) PIN AP (Personal Identification Number) generated by the AP (Access Point) PIN STA (Personal Identification Number) generated by the WiFi client (STA) 2 Configure the WiFi connection. 3 If you have enabled and configured WPS, click WPS connect. 4 Click Save. 5 STOP. This procedure is complete.
Configure a Beacon 6 (HA-0336W-B) Procedure 18 1 Nokia WiFi Beacon 6 Product Guide Wireless 5G networking configuration Select Network > Wireless 5GHz from the top-level menu in the Ethernet Gateway window, as shown in Figure 28. Figure 28 Wireless 5GHz network window Table 24 describes the fields in the Wireless 5GHz network window.
Nokia WiFi Beacon 6 Product Guide Field Description Bandwidth Choose from: • • • Configure a Beacon 6 (HA-0336W-B) 20 MHz 40 MHz 80 MHz Channel Choose a channel from the drop-down menu or choose Auto to have the channel automatically assigned Transmitting Power Choose a percentage for the transmitting power from the drop-down menu: • • • • Low (20%) Medium (40%) High (60%) Maximum (100%) WMM Select this checkbox to enable or disable wireless multi media Enable MU-MIMO Choose Enable or disab
Configure a Beacon 6 (HA-0336W-B) (2) When Encryption Mode is set to “WPA/WPA2 Enterprise”, the following options become available: Primary RADIUS server, port and password; Secondary RADIUS server, port, and password; RADIUS accounting port. 3 If you have enabled and configured WPS, click WPS connect. 4 Click Save. 5 STOP. This procedure is complete. Procedure 19 1 Wireless scheduling Select Network > Wireless Schedule from the top-level menu in the Ethernet Gateway window, as shown in Figure 29.
Nokia WiFi Beacon 6 Product Guide 3 Configure a Beacon 6 (HA-0336W-B) Click the plus sign (+) to add a scheduling rule. A separate panel appears for configuring wireless schedule rules. 4 Enter a start time and end time for the period in which you want the wireless signal off. 5 Choose Everyday or Individual Days from the drop-down menu. 6 If you chose Individual Days, select the checkboxes for the desired days. The Recurrence Pattern shows the rules created to date.
Configure a Beacon 6 (HA-0336W-B) Figure 30 Nokia WiFi Beacon 6 Product Guide IP Routing window Table 25 describes the fields in the IP Routing window.
Nokia WiFi Beacon 6 Product Guide Issue: 01 Configure a Beacon 6 (HA-0336W-B) 3FE-47429-AAAA-TCZZA 83
Configure a Beacon 6 (HA-0336W-B) Procedure 21 1 Nokia WiFi Beacon 6 Product Guide DNS configuration Select Network > DNS from the top-level menu in the Ethernet Gateway window, as shown in Figure 31. Figure 31 DNS network window Table 26 describes the fields in the DNS network window.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) 2 Enter the domain name and IP address and click Add. 3 If required, associate an origin domain with a new domain, click Add. 4 STOP. This procedure is complete. Procedure 22 1 TR-069 configuration Select Network > TR-069 from the top-level menu in the Ethernet Gateway window, as shown in Figure 32. Figure 32 TR-069 network window Table 27 describes the fields in the TR-069 network window.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide (1 of 2) Field Description Username Username used to log in to the Beacon 6 (HA-0336G-A) Password Password used to log in to the Beacon 6 (HA-0336G-A) Connect Request Username Username used to log in to the auto-configuration server Connect Request Password Password used to log in to the auto-configuration server (2 of 2) 2 Configure TR-069 by entering the required information. 3 Click Save. 4 STOP.
Nokia WiFi Beacon 6 Product Guide Figure 33 Configure a Beacon 6 (HA-0336W-B) QoS Config window (L2) Table 28 describes the fields in the QoS Config window.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide Source Port and Source Port Max Enter the values for the source port and port max (highest port number) or select the Exclude checkbox Destination Port and Destination Port Max Enter the values for the destination port and port max (highest port number), or select the Exclude checkbox 2 Choose a QoS type from the drop-down menu: L2 or L3. 3 Configure a QoS policy. 4 Click Add to add a QoS policy. 5 STOP.
Nokia WiFi Beacon 6 Product Guide Table 29 Configure a Beacon 6 (HA-0336W-B) Mesh parameters Field Description Beacon Serial Number Serial number of the Beacon 6 (HA-0336G-A) Enable Bridge Mode Select this checkbox to enable bridge mode; see Figure 35.
Configure a Beacon 6 (HA-0336W-B) Figure 36 Nokia WiFi Beacon 6 Product Guide Mesh window—Enable Bridge Mode confirmation 4 If required, deselect the Enable Bridge Mode checkbox to return the mesh from bridge mode to router mode. 5 Click Add to add the Beacon 6 (HA-0336G-A) to the table. 6 Click Refresh to update the information in the table. 7 STOP. This procedure is complete. 8.1.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) • Access Control Issue: 01 3FE-47429-AAAA-TCZZA 91
Configure a Beacon 6 (HA-0336W-B) Procedure 25 Nokia WiFi Beacon 6 Product Guide Firewall configuration Select Security > Firewall from the top-level menu in the Ethernet Gateway window, as shown in Figure 37. Figure 37 Firewall window Three security levels are available: Off, Low, and High. At the Off level, no firewall security is in effect. At the Low level, pre-routing is supported: port forwarding, DMZ, host application, and host drop.
Nokia WiFi Beacon 6 Product Guide 2 1 Configure the firewall. 3 Click Save. 4 STOP. This procedure is complete.
Configure a Beacon 6 (HA-0336W-B) Procedure 26 Nokia WiFi Beacon 6 Product Guide MAC filter configuration Select Security > MAC Filter from the top-level menu in the Ethernet Gateway window, as shown in Figure 38. Figure 38 MAC filter window Table 31 describes the fields in the MAC filter window.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) 1 Field Description MAC Filter Mode Choose the MAC filter mode from this drop-down menu: Blocked or Allowed LAN Port Select the checkboxes for the LAN ports MAC Address Choose a MAC address from the drop-down menu or enter the address in the text field WiFi SSID MAC Filter Mode Choose the MAC filter mode from this drop-down menu: Blocked or Allowed SSID Select Choose an SSID option from the drop-down menu Enable Select this c
Configure a Beacon 6 (HA-0336W-B) Figure 39 Nokia WiFi Beacon 6 Product Guide IP filter window Table 32 describes the fields in the IP filter window.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) 1 (2 of 2) 2 Configure the IP filter. 3 Click Add. 4 STOP. This procedure is complete. Procedure 28 URL filter configuration 1 Select Security > URL Filter from the top-level menu in the Ethernet Gateway window, as shown in Figure 40. Figure 40 URL Filter window Note — You cannot use URL filtering for HTTPS. The URL is encrypted when using HTTPS.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide Table 33 describes the fields in the URL Filter window.
Nokia WiFi Beacon 6 Product Guide Table 33 Configure a Beacon 6 (HA-0336W-B) URL Filter parameters Field Description URL Filter Enable URL Filter Select the checkbox to enable the URL filter URL Filter Type Select the radio button for Block or Allow the URL URL List URL Address Enter the URL address PortNumber Enter the port number; the default is 80 2 Configure the URL Filter. 3 Click Add Filter. 4 STOP. This procedure is complete.
Configure a Beacon 6 (HA-0336W-B) Table 34 Nokia WiFi Beacon 6 Product Guide Parental control parameters Field Description Policy Name Enter a name for the parental control policy or choose a policy from the list Device The device for which the rule will apply IP Enter the IPv4 address for the device or choose an IPv4 address from the list URL Enter the URL for the device or choose a URL from the list Days of week Choose Every Day, or Individual Days and select the checkboxes for the days of
Nokia WiFi Beacon 6 Product Guide Figure 42 Configure a Beacon 6 (HA-0336W-B) DMZ and ALG window Table 35 describes the fields in the DMZ and ALG window.
Configure a Beacon 6 (HA-0336W-B) Procedure 31 Nokia WiFi Beacon 6 Product Guide Access control configuration This procedure describes how to configure the access control level (ACL). Note 1 — ACL takes precedence over the firewall policy. Note 2 — The trusted network object will be shared for all WAN connections; it is not applied individually to a WAN connection. 1 Select Security > Access Control from the top-level menu in the Ethernet Gateway window, as shown in Figure 43.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) WAN Choose a connection from the drop-down menu Enable Trusted Network Select the checkbox to enable or disable ICMP, Telnet, SSH, HTTP, TR069, HTTPS Select an access control level for each protocol: • • WAN side—Allow, Deny, or Trusted Network Only LAN side—Allow or Deny Trusted Network Source IP Start Enter a start IP address for the new subnet trusted network Source IP End Enter an end IP address for the new subnet trusted n
Configure a Beacon 6 (HA-0336W-B) 1 Nokia WiFi Beacon 6 Product Guide Select Application > Port forwarding from the top-level menu in the Ethernet Gateway window, as shown in Figure 44. Figure 44 Port forwarding window Table 37 describes the fields in the port forwarding window.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) 2 Configure port forwarding. 3 Click Add. 4 STOP. This procedure is complete. Procedure 33 Port triggering 1 Select Application > Port Triggering from the top-level menu in the Ethernet Gateway window, as shown in Figure 45. Figure 45 Port Triggering window Table 38 describes the fields in the Port Triggering window.
Configure a Beacon 6 (HA-0336W-B) Triggering Port Nokia WiFi Beacon 6 Product Guide Enter the triggering port range (1 of 2) Field Description Expire Time Enter the expiration time in seconds Open Protocol Choose the open port protocol from the drop-down menu: • • • Trigger Protocol TCP UDP TCP/UDP Choose the triggering port protocol from the drop-down menu: • • • TCP UDP TCP/UDP Enable Triggering Select this checkbox to enable port triggering WAN Connection List Choose a WAN connection fr
Nokia WiFi Beacon 6 Product Guide Figure 46 Configure a Beacon 6 (HA-0336W-B) DDNS window Table 39 describes the fields in the DDNS window. Table 39 Issue: 01 DDNS parameters Field Description WAN Connection List Choose a WAN connection from the drop-down menu Enable DDNS Select this checkbox to enable DDNS on the chosen WAN connection ISP Choose an ISP from the drop-down menu.
2 Configure DDNS. Click Save. Configure a Beacon 6 3(HA-0336W-B) Procedure 35 4 Nokia WiFi Beacon 6 Product Guide STOP. This procedure is complete. 1 S e l e NTP configuration c t Application > NTP from the top-level menu in the Ethernet Gateway window, as shown in Figure 47. Figure 47 2 Select the Enable NTP Service checkbox. 3 Click Save. 4 STOP. This procedure is complete.
Nokia WiFi Beacon 6 Product Guide Figure 48 Configure a Beacon 6 (HA-0336W-B) UPnP and DLNA window 2 Select the Enable UPnP/DLNA checkbox to enable UPnP and DLNA. 3 Click Save/Apply. 4 STOP. This procedure is complete. 8.1.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide • • • the password length must be from 8 to 24 characters • the same character must not appear more than 8 times in a row the first character must be a digital number or a letter the password must contain at least two types of characters: numbers, letters, or special characters When the password meets the password rules, the application displays the message “Your password has been changed successfully”.
Nokia WiFi Beacon 6 Product Guide Prompt Message Procedure 38 Configure a Beacon 6 (HA-0336W-B) Password prompt message 2 Configure the new password. 3 Click Save. 4 STOP. This procedure is complete. Device management 1 Select Maintenance > Device Management from the top-level menu in the Ethernet Gateway window, as shown in Figure 50. Figure 50 Device Management window Table 41 describes the fields in the Device Management window.
2 Configure an alias for a specific host. Click Add. Configure a Beacon 6 3(HA-0336W-B) Procedure 39 4 Nokia WiFi Beacon 6 Product Guide STOP. This procedure is complete. 1 S e l e Backup and Restore c t Maintenance > Backup and Restore from the top-level menu in the Ethernet Gateway window, as shown in Figure 51. Figure 51 Procedure 40 112 Backup and Restore window 2 Click Select File and choose the backup file.
Nokia WiFi Beacon 6 Product Guide 1 Configure a Beacon 6 (HA-0336W-B) Select Maintenance > Firmware Upgrade from the top-level menu in the Ethernet Gateway window, as shown in Figure 52. Figure 52 Firmware Upgrade window STOP. This procedure is complete.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide 1 Procedure 41 Reboot Select Maintenance > Reboot Device from the top-level menu in the Ethernet Gateway window, as shown in Figure 53. Figure 53 Procedure 42 Reboot Device window 2 Click Reboot to reboot the Beacon 6 (HA-0336G-A). 3 STOP. This procedure is complete. Restore factory defaults Select Maintenance > Factory Default from the top-level menu in the Ethernet Gateway window, as shown in Figure 54.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) 1 Figure 54 Factory Default window 2 Click Factory Default to reset the Beacon 6 (HA-0336G-A) to its factory default settings. 3 STOP. This procedure is complete. Procedure 43 Diagnose connections Select Maintenance > Diagnostics from the top-level menu in the Ethernet Gateway window, as shown in Figure 55.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide 1 Figure 55 116 Diagnostics window 2 Choose a WAN connection to diagnose from the drop-down menu. 3 Enter the IP address or domain name. 4 Select the test type: ping, traceroute, or both. 5 Enter the number of ping attempts to perform (1 to 1000); the default is 4. 6 Enter a ping packet length (64 to 1500); the default is 64. 7 Enter the maximum number of trace hops (1 to 255); the default is 30.
Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B) 1 8 Issue: 01 Click Start Test. The results will be displayed at the bottom of the window.
9 Click Cancel to cancel the test. Nokia WiFi Beacon 6 Product Guide 10 Configure a Beacon 6 (HA-0336W-B) STOP. This procedure is complete. Procedure 44 View log files 1 Select Maintenance > Log from the top-level menu in the Ethernet Gateway window, as shown in Figure 56.
3 • • • • • • • • Choose a reading level from the drop-down menu to determine which types of events to display from the log file: Emergency Alert Critical Error Warning Notice Informational Debug 4 The log file is displayed at the bottom of the window. 5 STOP. This procedure is complete. 8.1.7 RG troubleshooting counters The Troubleshooting Counters feature enables service providers and end users to monitor the performance of their broadband connection.
Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide Customer documentation Customer Documentation Welcome Page Technical Support Customer Documentation Technical Support Documentation feedback Customer Documentation Feedback 120 3FE-47429-AAAA-TCZZA Issue: 01
Copyright 2019 Nokia.