Quick Start Guide

NSBAlex Wen
TWDeng Ziwei
2020.10.13
Fisrt release
A0
Quick Start Guide
Beacon 1.1
Quick
Start
Guide
PANTONE 311 C
成品正面图
Front
Back
1、折叠后尺寸(Dimension after folding)：85*120mm，R5；
2、印刷颜色（Printing colour）：彩色印刷（Colour printing）；
3、材质(Material)：200g哑光铜版纸(200g Matte copperplate paper)；
4、表面处理（Coating）：过哑油（Matte varnishing）——双面过油；
5、装订工艺（Binding process）：折页（Paper folding）——风琴折
；
6、输出网线（Output lpi）：200lpi；
7、公差（Tolerance)：长（L）*宽（W）±1.0mm;
8、原材料及后处理工艺均能满足我司《环保技术标准》要求.
(Raw materials and the corresponding post processing should meet requireme
nts defined
in the Environmental Protection Technical Standards)
Enjoy your new
Wi-Fi Network!
7. Connect to Wi-Fi5. Wait for the blue-green light 6. Place beacons
If you have difficulties setting up, try the guided setup using the
Nokia WiFi app, or visit our support website for more help.
Connect your devices using the SSID and Wi-Fi
keys shown on the bottom of the beacon that is
connected to your modem in step 4.
Your system may reboot after setup to optimize
your network settings to your environment. This
will take a couple of minutes and your network
will be temporarily offline.
Place additional beacons around your home, no
further than two rooms apart.*
*For multiple beacons use the Nokia WiFi app
for guided setup
The light on your beacon will turn blue-green
when it is ready.
4. Connect to modem3. Connect Ethernet2. Power onLet’s start 1. Plug in
Connect the Ethernet cable into a LAN port on
the modem and restart it.
Plug the Ethernet cable into the blue WAN port on
your beacon.
Push the on/off button, the LED on the front of
the device will turn on.
Plug in the power adapter and then connect it to
the back of your beacon.
Download the Nokia WiFi app for a guided setup,
or follow this guide for a quick setup.
Nokia WiFi